Panasonic Network Camera Kx Hcm10 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  111
Power Indicator 
continues 
blinking.•Internal Failure of the server or the congestion on the network 
traffic when using DHCP may prevent Network Camera from 
getting the IP address. Ask the network administrator or your 
ISP.
•Power Indicator blinks when updating firmware on page 87. 
When the Update Firmware failed, refer to page 112.
•If you cannot access Network Camera, the Network Camera...

Operating Instructions
112
Update 
Firmware has 
not finished.When Update Firmware is interrupted by power off, or for network 
troubles and other problems, follow the procedure below.
*
1 Refer to page 87 for the Update Firmware. About Network Camera Setup
Problem Cause and Remedy
No Top PageUpdate
Firmware
window
Yes Turn on Network Camera and the PC.
Enter the IP address on the web browser to access 
Network Camera.
Top Page or Update
Firmware window?
Is the Version wished number? Access Setup Page or...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  113
About Top View Image screen
Problem Cause and Remedy
The Top View 
Image screen 
(Single Camera/
Multi-Camera) does 
not appear.•If you are using Internet Explorer, the first time the PC 
connects to Network Camera, a pop-up Security Warning 
window will appear to download ActiveX Controls. When 
using Windows NT, Windows 2000 or Windows XP, log on 
with an appropriate account that is authorized to...

Operating Instructions
114
Image flickers.•If the object is dark, the image will flicker. Make the 
condition around Network Camera brighter.
•Wrong power line frequency makes images flicker.
Refer to page 78.
Refresh interval is 
longer than the 
setup.•The traffic of the network, PC performance and the object 
of the image affect the refresh interval. The network 
congestion causes refresh interval slower than the set up.
•When more than one client are viewing, the refresh interval 
becomes slower....

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  115
5.5 Confirmation of Network Camera Operation
This procedure checks the Network Camera operation. IP address of the PC has 
to be on the same network to be able to access Network Camera. If Top Page 
appears, Network Camera has no defect.
1.Push the CLEAR SETTING button as illustrated on page 100. All settings on 
Network Camera will be set to default.
2.Connect locally between the PC and Network...

Operating Instructions
116
4.Record the current TCP/IP properties of the PC. They are important in the 
later procedure to set the TCP/IP properties of the PC back.
5.Enter 192.168.0.250 in the IP address field and 255.255.255.0 in the 
Subnet Mask field and click [OK]. 
(Windows 95, Windows 98 and Windows Me must restart to activate the 
entered TCP/IP properties.)
•Set up the unique IP address which does not overlap other IP 
addresses on the network. Overlapped IP addresses on the network 
cause the...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                  117
5.6 FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance...

Operating Instructions
118 

Operating Instructions
119
Index 

Operating Instructions
120
A
AC adaptor 12, 20, 108
ActiveX Controls 39
Administrator 60
Alarm Mode 68
Alarm trigger 68, 69
ASCII character table 96
Authentication 11, 36, 61, 63
Auto Adjustment 59
B
Brightness 79
Broadband Router 32
Buffered Image 46, 67, 69, 70, 73, 74, 76
C
Camera Name 58
Camera Setup 78
Camera Stand 12, 92
Category 5 cable 20
CATV/xDSL/Optical cable modem 18
Circuit diagram 95
CLEAR SETTING button 15, 100
Click to Center 41
Configuration window 30
D
Date and Time 58, 59
DC IN jack...