Panasonic Network Camera BL-C30C Operating Instructions

Operating Instructions
61
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
43).
 Clicking [

Operating Instructions
62
5.Set the image settings, and click [Next>].
 Clicking [].
 Clicking [

Operating Instructions
63
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
64
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
65
SettingDescription
Server IP 
Address or 
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the server IP address, set 4 digits (0—255) and 3 
periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
Po r t N o. Enter the number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
 If your ISP requires a login ID, set it (0—63 characters).
Password*2 If your ISP requires...

Operating Instructions
66
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
67
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name 
(1—255 characters).
Po r t N o. Enter the number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you set the server IP address, set 4 digits (0—255) and 
3 periods such as...

Operating Instructions
68
8.Confirm the settings, and click [Save].
 New settings are saved. The buffered images are deleted.
 When finished, Success! is displayed.
9.Click [Go to Image Buffer/Transfer page].
 The Image Buffer/Transfer page is displayed.
Notes
 If you set a short interval to transfer image to a cell phone, many E-mails 
may be sent to it leading to a large phone bill. Therefore, we recommend 
you set a long interval. In an emergency situation, the E-mail transfer can 
be stopped by...

Operating Instructions
69
2.14 Buffering or Transferring Images by Sensor
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Sensor] for trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete this buffered images.
 Click [Save] to save the settings. The buffered images are deleted.
 Clicking [Cancel] takes you back...

Operating Instructions
70
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
43).
 Clicking [