Home > Panasonic > Security Camera > Panasonic Network Camera BL-C30C Operating Instructions

Panasonic Network Camera BL-C30C Operating Instructions

Here you can view all the pages of manual Panasonic Network Camera BL-C30C Operating Instructions. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.

Page 41

Operating Instructions
41
2.5 Registering with the Viewnetcam.com service
Viewnetcam.com is a free service (dynamic DNS service) that allows you to assign 
an easy-to-remember name to the camera, similar to your favorite website. 
Viewnetcam.com also allows you to easily access the camera, even when your ISP 
changes the IP address. Panasonic Communications recommends you register 
with it for Internet access to the camera. See 
http://www.viewnetcam.com for 
details about the Viewnetcam.com service....

Page 42

Operating Instructions
42
Notes
 When the Viewnetcam.com registration website is not displayed, confirm 
that the URL is displayed in the right column of the Your Account Link. If 
the URL is not displayed, follow the procedures below.
 Personal (Camera) URL is available after you registered with the 
Viewnetcam.com service.
 If port forwarding is not enabled or your network is not connected to the 
Internet, the Viewnetcam.com service is not available.
6.Register with the Viewnetcam.com service...

Page 43

Operating Instructions
43
2.6 Setting Date and Time
The Date and Time page allows you to set date and time. Date and time are used 
for image buffer/transfer, operation time and time stamps on the buffered image.
Note
Saving the date and time settings deletes all buffered images.
1.Click [Date and Time] on the Setup page.
2.Set each parameter.
 Set [Automatic Time Adjustment] to synchronize the time automatically 
with an NTP server.
 Clicking [Cancel] cancels your settings without saving changes. 

Page 44

Operating Instructions
44
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Date and Time page].
 The Date and Time page is displayed.
Note
Date and time settings become incorrect depending on the length of power-on 
time or the internal temperature. Using the Automatic Time Adjustment is 
recommended.
SettingDescription
Time Setting Select date and format (AM/PM or 24 H). These settings 
are used for image buffer/transfer, operation time and...

Page 45

Operating Instructions
45
2.7 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power 
source frequency and pan/tilt range.
1.Click [Camera] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Page 46

Operating Instructions
46
SettingDescription
Camera Name The camera name is displayed on the Single Camera 
page.
 Enter ASCII characters (see page 114) or characters in 
each language (1—15 characters for a 1-byte character 
and 1—7 characters for a 2-byte character). But [Space], 
[], [], [&], [] are not available.
White BalanceSelect from the following options.
 Auto (default)—Automatic adjustment
 Fixed Indoor—Electric bulb (2800 K) 
 Fixed Fluorescent 
(White)—White (3600 K)
 Fixed Fluorescent...

Page 47

Operating Instructions
47
3.Click [Save] when finished.
 New settings are saved. If the [Pan Range] or [Tilt Range] settings are 
changed, the camera turns to the home position.
 When finished, Success! is displayed.
4.Click [Go to Camera page].
 The Camera page is displayed.
Tilt Range*1Select from the following options.
 Minimum—Current settings, –40—+10
 Home Position*2—Current settings, –40—+10
Maximum—Current settings, –40—+10
 The values must be selected as minimumhome 
positionmaximum....

Page 48

Operating Instructions
48
Specifying Pan/Tilt Range
1.Access the camera (see page 8), and click [Single] at the top of the Top page.
2.Open another web browser, and display the Camera page (see page 45).
3.Align the Single Camera page and the Camera page side to side.
4.Set the pan/tilt range.
 Selecting [Current] displays the current angle of the camera. Select each 
value while adjusting the pan/tilt on the Single Camera page.
Note
The values must be selected as minimumhome positionmaximum.
5.Click...

Page 49

Operating Instructions
49
2.8 Changing Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, 
administrator user name and password. The authentication window is displayed, 
and allows the registered users to access the camera.
Notes
 If you access the camera for the first time, the window to set administrator user 
name and password is displayed. Make a note of the user name and password 
so that you will not forget them.
...

Page 50

Operating Instructions
50
Notes
 When setting authentication, set the user name and password, and save 
them.
 When users other than an administrator are accessing the camera, 
[Setup] and [Maintenance] tab will not be displayed.
 The user name and password are case sensitive.
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
SettingDescription
General 
AuthenticationAuthentication has 2 phases.
 If you set [Permit access from guest users], the camera...
Start reading Panasonic Network Camera BL-C30C Operating Instructions

Related Manuals for Panasonic Network Camera BL-C30C Operating Instructions

All Panasonic manuals