Panasonic Network Camera BL-C30C Operating Instructions

Operating Instructions
51
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Note
When the user name and password have been changed, the camera displays 
an authentication window. Enter the user name and password, and click [OK].
Administrator/General Users/Guest Users
The camera has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered users. Set [Permit access from guest users] 
on the Security: Administrator page...

Operating Instructions
52
2.9 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] is displayed at the top of the page. After you log in as an administrator, you 
can access the Setup page and the Maintenance page.
1.Click [Login] at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password 
set for General Users or Administrator.
3.Enter a valid user name and...

Operating Instructions
53
2.10 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] on the Security: Administrator page, the 
access level can be set for guest users.
Note
For general users, the Setup and Maintenance tabs are not displayed.
1.Click [General Users] on the Setup page.
2.If you create a...

Operating Instructions
54
4.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.
SettingDescription
User ID List Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user...

Operating Instructions
55
2.11 Changing Initial Settings on the Single 
Camera page or the Multi-Camera page
The Image Display page allows you to change initial settings (display settings when 
a user accesses the camera) of image resolution, image quality and refresh 
interval. The initial language can be selected from eight languages. The banner 
can be displayed for administrator or general users or both.
1.Click [Image Display] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your...

Operating Instructions
56
SettingDescription
Image Resolution Select the image resolution.
640 x 480 pixels (Only for the Single Camera page)
320 x 240 pixels (default)
160 x 120 pixels (Only for the Multi-Camera page)
Image Quality Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality.
[Favor Motion] optimizes for enhanced motion.
Refresh Interval Select a refresh interval. 
(Motion—60-second interval)
Limit Continuous 
Motion JPEG
 Limit time of...

Operating Instructions
57
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Image Display page].
 The Image Display page is displayed. 

Operating Instructions
58
2.12 Configuring Multiple Cameras
The Multi-Camera Setup page allows you to configure the camera IP addresses 
and camera names to view multiple images on the Multi-Camera page. These 
configurations are required to use the Multi-Camera page. Up to 12 cameras can 
be configured.
1.Click [Multi-Camera] on the Setup page.
2.Click Add.
Notes
 If you click the camera number, the modification page is displayed. The 
camera setting can be modified or deleted on it.
 If you...

Operating Instructions
59
Notes
 If your camera will only be accessed on your local network, use each 
cameras local IP address and port number.
 If you intend to access your camera from the Internet, you must use each 
cameras global IP address and respective port number.
4.Click [Save] when finished.
 New settings are saved.
 The Multi-Camera Setup page is displayed.
SettingDescription
Display Check the box to enable the camera.
IP Address*1 or 
Host Name*2 Set the IP address or the host name to...

Operating Instructions
60
2.13 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete this buffered images.
 Click [Save] to save the settings. The buffered images are deleted.
 Clicking [Cancel] takes you back...