Panasonic Network Camera BL-C1A BL-C20A Information Guide

Operating Instructions
[For assistance, please call: 1-800-272-7033] 99
6.1.4 Confirming Sensor Logs
Displays up to 50 Sensor Logs in chronological order. Old logs will be overwritten 
by new ones.
1.Click [Sensor Log] on the Maintenance page.
2.Sensor Logs are displayed.
Note
If the camera is restarted, all sensor logs are deleted.
6.1.5 Restarting the Camera
It is possible to restart the camera by disconnecting the AC adaptor from the outlet 
and reconnecting it again. The camera can also be restarted...

Operating Instructions
100
6.1.6 Updating the Camera Firmware
The Update Firmware page allows you to update the cameras firmware. If new 
firmware is available, install it into the camera.
Note
 Do not turn off the power during a firmware update.
 All buffered images and sensor logs on the internal memory will be 
deleted after the firmware update.
 The firmware version is displayed on the Top page and the Status page. 
1.Download the new firmware from the Panasonic Network Camera support 
website at...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 101
 The Update page is displayed after about 1 minute for BL-C1A or 90 
seconds for BL-C20A. The firmware update process takes about 6 
minutes for BL-C1A or 7 minutes for BL-C20A.
4.Click [Browse...].
 A dialog box is displayed to select the firmware.
5.Select the firmware (including directory information) and click [Open].
 The firmware file name is displayed.
6.Confirm the firmware file name, and click [Update Firmware].
...

Operating Instructions
102
7.Confirm that the version number on the Top page is updated.
 If the version number is updated, the firmware update is complete.
Updated version 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 103
6.1.7 Creating a Configuration File
A configuration file can be saved on your PC. You can load camera settings from 
the configuration file on the Load Settings page (see page 
104).
Note
The saved image has contains private information. It is important to prevent 
leaks of private information.
1.Click [Save Settings] on the Maintenance page.
2.Click [Save].
3.Click [Save] on the File Download dialog box.
4.Specify the location, and...

Operating Instructions
104
6.1.8 Loading Settings from a Configuration File
Camera settings can be loaded from a configuration file. If you reset the camera to 
factory default, the camera can load previously used settings from a configuration 
file.
Note
 The configuration file also saves network settings. When settings are 
loaded, the network settings are also loaded. 
 If you try to update the camera, create a configuration file after updating 
the firmware. If there is a firmware version...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 105
6.1.9 Resetting the Camera to Factory Default
All camera settings are reset to factory default when the Execute button is clicked. 
To restore the wireless connection, access the camera by using a wired connection 
and set up the wireless configuration. (For BL-C20A, see Getting Started.)
1.Click [Reset to Factory Default] on the Maintenance page.
2.Click [Execute].
 The indicator blinks orange, and then turns off for 5 seconds.
...

Operating Instructions
106
6.2 Support page
6.2.1 The Help page
The Help page displays explanations for each of the following features.
Clicking [Help] on the Support page displays the following page.
Support
(1)HelpDisplays the Help page (see page 106).
(2)[For BL-C20A] 
Wireless HelpDisplays the Wireless Help page (see page 107).
(3)Product 
InformationDisplays the product information website (see page 
107).
(4)Support 
InformationDisplays the support information website (see page 
107).
(1)
(2)
(3)
(4) 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 107
6.2.2 [For BL-C20A] The Wireless Help page
The Wireless Help page explains Wireless Basic configuration, Wireless Cipher 
configuration and Wireless Status.
Clicking [Wireless Help] on the Support page displays the following page.
Note
[Wireless Help] is displayed only when logging in as an administrator.
6.2.3 Product Information
See the Panasonic Network Camera support website for product information.
Clicking [Product...

Operating Instructions
108
6.3 FACTORY DEFAULT RESET Button
There is a FACTORY DEFAULT RESET button on the side of the camera.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory 
default. If you lose your user name and password, use this button to reset the 
camera. To restore the wireless connection, access the camera by using a wired 
connection and set up the wireless configuration. (For BL-C20A, see Getting 
Started.)
 To reset the camera, press the FACTORY DEFAULT RESET button...