Panasonic Network Camera BL-C1A BL-C20A Information Guide
Here you can view all the pages of manual Panasonic Network Camera BL-C1A BL-C20A Information Guide. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
5 Using Other Features
5.1 Changing Initial Settings on the Single
Camera page or the Multi-Camera page
The Image Display page allows you to change the initial settings (display settings
when a user accesses the camera) for the Single Camera, Multi-Camera, Limit
Continuous Motion JPEG, Language and Banner Display.
1.Click [Image Display] on the Setup page.
2.Set each parameter.
Clicking [Cancel] cancels your settings without...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-90.png "Page 91
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
5 Using Other Features
5.1 Changing Initial Settings on the Single
Camera page or the Multi-Camera page
The Image Display page allows you to change the initial settings (display settings
when a user accesses the camera) for the Single Camera, Multi-Camera, Limit
Continuous Motion JPEG, Language and Banner Display.
1.Click [Image Display] on the Setup page.
2.Set each parameter.
Clicking [Cancel] cancels your settings without...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 89 5 Using Other Features 5.1 Changing Initial Settings on the Single Camera page or the Multi-Camera page The Image Display page allows you to change the initial settings (display settings when a user accesses the camera) for the Single Camera, Multi-Camera, Limit Continuous Motion JPEG, Language and Banner Display. 1.Click [Image Display] on the Setup page. 2.Set each parameter. Clicking [Cancel] cancels your settings without...
Page 92
![Page 92
Operating Instructions
90
SettingDescription
Image Resolution Select the image resolution.
640 × 480 pixels (Only for the Single Camera page)
320 × 240 pixels (default)
160 × 120 pixels (Only for the Multi-Camera page)
Image Quality Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality. (default)
[Favor Motion] optimizes for enhanced motion.
Refresh Interval Select a refresh interval.
(Motion, 3 s, 5 s, 10 s, 30 s, and 60 s)
Limit Continuous
Motion...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-91.png "Page 92
Operating Instructions
90
SettingDescription
Image Resolution Select the image resolution.
640 × 480 pixels (Only for the Single Camera page)
320 × 240 pixels (default)
160 × 120 pixels (Only for the Multi-Camera page)
Image Quality Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality. (default)
[Favor Motion] optimizes for enhanced motion.
Refresh Interval Select a refresh interval.
(Motion, 3 s, 5 s, 10 s, 30 s, and 60 s)
Limit Continuous
Motion...")
Operating Instructions 90 SettingDescription Image Resolution Select the image resolution. 640 × 480 pixels (Only for the Single Camera page) 320 × 240 pixels (default) 160 × 120 pixels (Only for the Multi-Camera page) Image Quality Select the image quality. [Favor Clarity] optimizes for good quality. [Standard] offers standard quality. (default) [Favor Motion] optimizes for enhanced motion. Refresh Interval Select a refresh interval. (Motion, 3 s, 5 s, 10 s, 30 s, and 60 s) Limit Continuous Motion...
Page 93
![Page 93
Operating Instructions
[For assistance, please call: 1-800-272-7033] 91
3.Click [Save] when finished.
The new settings are saved.
When finished, Success! is displayed.
4.Click [Go to Image Display page].
The Image Display page is displayed.
Banner DisplayWhen checked to [Enable], the setting will be enabled.
When unchecked, the setting will be disabled.
Note
When the Banner Display is enabled, the camera
accesses the Image URL every time the Single
Camera page is displayed. The intermittent...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-92.png "Page 93
Operating Instructions
[For assistance, please call: 1-800-272-7033] 91
3.Click [Save] when finished.
The new settings are saved.
When finished, Success! is displayed.
4.Click [Go to Image Display page].
The Image Display page is displayed.
Banner DisplayWhen checked to [Enable], the setting will be enabled.
When unchecked, the setting will be disabled.
Note
When the Banner Display is enabled, the camera
accesses the Image URL every time the Single
Camera page is displayed. The intermittent...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 91 3.Click [Save] when finished. The new settings are saved. When finished, Success! is displayed. 4.Click [Go to Image Display page]. The Image Display page is displayed. Banner DisplayWhen checked to [Enable], the setting will be enabled. When unchecked, the setting will be disabled. Note When the Banner Display is enabled, the camera accesses the Image URL every time the Single Camera page is displayed. The intermittent...
Page 94
![Page 94
Operating Instructions
92
5.2 Configuring Multiple Cameras
The Multi-Camera Setup page allows you to configure camera IP addresses and
camera names to view multiple images on the Multi-Camera page. These
configurations are required to use the Multi-Camera page. Up to 12 cameras can
be configured. The Selfcamera is registered at No. 1 by default.
1.Click [Multi-Camera] on the Setup page.
2.Click Add.
Note
If you click the camera number, the modification page is displayed.
Camera settings can be...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-93.png "Page 94
Operating Instructions
92
5.2 Configuring Multiple Cameras
The Multi-Camera Setup page allows you to configure camera IP addresses and
camera names to view multiple images on the Multi-Camera page. These
configurations are required to use the Multi-Camera page. Up to 12 cameras can
be configured. The Selfcamera is registered at No. 1 by default.
1.Click [Multi-Camera] on the Setup page.
2.Click Add.
Note
If you click the camera number, the modification page is displayed.
Camera settings can be...")
Operating Instructions 92 5.2 Configuring Multiple Cameras The Multi-Camera Setup page allows you to configure camera IP addresses and camera names to view multiple images on the Multi-Camera page. These configurations are required to use the Multi-Camera page. Up to 12 cameras can be configured. The Selfcamera is registered at No. 1 by default. 1.Click [Multi-Camera] on the Setup page. 2.Click Add. Note If you click the camera number, the modification page is displayed. Camera settings can be...
Page 95
![Page 95
Operating Instructions
[For assistance, please call: 1-800-272-7033] 93
Note
If your camera will only be accessed on your local network, use each
cameras local IP address and port number.
If you intend to access your camera from the Internet, you must use each
cameras host name (global IP address) and the port number.
4.Click [Save] when finished.
The new settings are saved.
The Multi-Camera Setup page is displayed.
SettingDescription
Display Check this box to enable the camera.
IP Address*1...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-94.png "Page 95
Operating Instructions
[For assistance, please call: 1-800-272-7033] 93
Note
If your camera will only be accessed on your local network, use each
cameras local IP address and port number.
If you intend to access your camera from the Internet, you must use each
cameras host name (global IP address) and the port number.
4.Click [Save] when finished.
The new settings are saved.
The Multi-Camera Setup page is displayed.
SettingDescription
Display Check this box to enable the camera.
IP Address*1...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 93 Note If your camera will only be accessed on your local network, use each cameras local IP address and port number. If you intend to access your camera from the Internet, you must use each cameras host name (global IP address) and the port number. 4.Click [Save] when finished. The new settings are saved. The Multi-Camera Setup page is displayed. SettingDescription Display Check this box to enable the camera. IP Address*1...
Page 96
![Page 96
Operating Instructions
94
5.3 Specifying Operation Time
The Operation Time page allows you to limit the time that the camera is in use. The
camera image turns to a gray screen outside operation time.
Note
Your privacy may be compromised if the time period is set incorrectly.
Confirm the time period after the setup.
If you access the camera as an administrator, you can view the image
outside the time period.
1.Click [Operation Time] on the Setup page.
2.Click a No. to set the operation time.
Note...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-95.png "Page 96
Operating Instructions
94
5.3 Specifying Operation Time
The Operation Time page allows you to limit the time that the camera is in use. The
camera image turns to a gray screen outside operation time.
Note
Your privacy may be compromised if the time period is set incorrectly.
Confirm the time period after the setup.
If you access the camera as an administrator, you can view the image
outside the time period.
1.Click [Operation Time] on the Setup page.
2.Click a No. to set the operation time.
Note...")
Operating Instructions 94 5.3 Specifying Operation Time The Operation Time page allows you to limit the time that the camera is in use. The camera image turns to a gray screen outside operation time. Note Your privacy may be compromised if the time period is set incorrectly. Confirm the time period after the setup. If you access the camera as an administrator, you can view the image outside the time period. 1.Click [Operation Time] on the Setup page. 2.Click a No. to set the operation time. Note...
Page 97
![Page 97
Operating Instructions
[For assistance, please call: 1-800-272-7033] 95
4.Click [Save] when finished.
The new settings are saved.
The Operation Time page is displayed.
About Operation Time
In the operation time settings, the enabled settings take priority over the disabled
settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in
other settings, the camera can be operated on both Monday and Tuesday.
SettingDescription
Enable Check the box to enable the setting. Uncheck the...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-96.png "Page 97
Operating Instructions
[For assistance, please call: 1-800-272-7033] 95
4.Click [Save] when finished.
The new settings are saved.
The Operation Time page is displayed.
About Operation Time
In the operation time settings, the enabled settings take priority over the disabled
settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in
other settings, the camera can be operated on both Monday and Tuesday.
SettingDescription
Enable Check the box to enable the setting. Uncheck the...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 95 4.Click [Save] when finished. The new settings are saved. The Operation Time page is displayed. About Operation Time In the operation time settings, the enabled settings take priority over the disabled settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in other settings, the camera can be operated on both Monday and Tuesday. SettingDescription Enable Check the box to enable the setting. Uncheck the...
Page 98
![Page 98
Operating Instructions
96
5.4 Changing the Indicator Display
The Indicator Control page allows you to select an operation for the indicator. There
are three options.
Turn indicator on when camera is on.
Turn indicator on during camera access.
Never turn indicator on.
1.Click [Indicator Control] on the Setup page.
2.Select an option.
Clicking [Cancel] cancels your settings without saving changes.
Note
See page 4 for the Indicator Display table.
Selecting [Never turn indicator on] keeps...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-97.png "Page 98
Operating Instructions
96
5.4 Changing the Indicator Display
The Indicator Control page allows you to select an operation for the indicator. There
are three options.
Turn indicator on when camera is on.
Turn indicator on during camera access.
Never turn indicator on.
1.Click [Indicator Control] on the Setup page.
2.Select an option.
Clicking [Cancel] cancels your settings without saving changes.
Note
See page 4 for the Indicator Display table.
Selecting [Never turn indicator on] keeps...")
Operating Instructions 96 5.4 Changing the Indicator Display The Indicator Control page allows you to select an operation for the indicator. There are three options. Turn indicator on when camera is on. Turn indicator on during camera access. Never turn indicator on. 1.Click [Indicator Control] on the Setup page. 2.Select an option. Clicking [Cancel] cancels your settings without saving changes. Note See page 4 for the Indicator Display table. Selecting [Never turn indicator on] keeps...
Page 99
![Page 99
Operating Instructions
[For assistance, please call: 1-800-272-7033] 97
6 Camera Maintenance
6.1 Maintenance page
Maintenance
(1)StatusDisplays the camera settings and status (see page 98).
(2)[For BL-C20A]
Wireless StatusDisplays wireless information (see page 98).
(3)Session StatusDisplays information on access to the camera (see page
98).
(4)Sensor LogDisplays sensor logs (see page 99).
(5)RestartRestarts the camera (see page 99).
(6)Update FirmwareUpdates the camera firmware (see page 100).
(7)Save...](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-98.png "Page 99
Operating Instructions
[For assistance, please call: 1-800-272-7033] 97
6 Camera Maintenance
6.1 Maintenance page
Maintenance
(1)StatusDisplays the camera settings and status (see page 98).
(2)[For BL-C20A]
Wireless StatusDisplays wireless information (see page 98).
(3)Session StatusDisplays information on access to the camera (see page
98).
(4)Sensor LogDisplays sensor logs (see page 99).
(5)RestartRestarts the camera (see page 99).
(6)Update FirmwareUpdates the camera firmware (see page 100).
(7)Save...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 97 6 Camera Maintenance 6.1 Maintenance page Maintenance (1)StatusDisplays the camera settings and status (see page 98). (2)[For BL-C20A] Wireless StatusDisplays wireless information (see page 98). (3)Session StatusDisplays information on access to the camera (see page 98). (4)Sensor LogDisplays sensor logs (see page 99). (5)RestartRestarts the camera (see page 99). (6)Update FirmwareUpdates the camera firmware (see page 100). (7)Save...
Page 100
![Page 100
Operating Instructions
98
6.1.1 Confirming the Status
The Status page allows you to check the status of the camera. The status
information provides support for troubleshooting.
Clicking [Status] displays the following page.
Note
See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for details about status
information.
6.1.2 [For BL-C20A] Confirming the Wireless Status
The Wireless Status page allows you to check the status of the wireless
connection....](http://img.usermanuals.tech/thumb/58/74576/w300_bl-c1a_en_ii_om_d-99.png "Page 100
Operating Instructions
98
6.1.1 Confirming the Status
The Status page allows you to check the status of the camera. The status
information provides support for troubleshooting.
Clicking [Status] displays the following page.
Note
See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for details about status
information.
6.1.2 [For BL-C20A] Confirming the Wireless Status
The Wireless Status page allows you to check the status of the wireless
connection....")
Operating Instructions 98 6.1.1 Confirming the Status The Status page allows you to check the status of the camera. The status information provides support for troubleshooting. Clicking [Status] displays the following page. Note See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for details about status information. 6.1.2 [For BL-C20A] Confirming the Wireless Status The Wireless Status page allows you to check the status of the wireless connection....