Panasonic Network Camera BB HCM403A Operating Guide
Have a look at the manual Panasonic Network Camera BB HCM403A Operating Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 76
Operating Instructions
76
1.Click [Administrator] on the Setup page.
2.Set each parameter.
Clicking [Cancel] cancels your settings without saving changes.
Setting Description
General
AuthenticationAuthentication has 3 phases.
If you set [Permit access from guest users], the camera
does not display the authentication window in camera
access. All guest users can view images without a user
name and password.
If you set [Permit access from guest users (mobile only)],
an authentication window is...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-75.png "Page 76
Operating Instructions
76
1.Click [Administrator] on the Setup page.
2.Set each parameter.
Clicking [Cancel] cancels your settings without saving changes.
Setting Description
General
AuthenticationAuthentication has 3 phases.
If you set [Permit access from guest users], the camera
does not display the authentication window in camera
access. All guest users can view images without a user
name and password.
If you set [Permit access from guest users (mobile only)],
an authentication window is...")
![Page 77
Operating Instructions
77
Note
When setting authentication, set the user name and password, and save
them.
When users other than an administrator are accessing the camera, the
[Setup] and [Maintenance] tabs will not be displayed.
The user name and password are case sensitive.
3.Click [Save] when finished.
The new settings are saved.
When finished, Success! is displayed.
4.Click [Go to Security: Administrator page].
The Security: Administrator page is displayed.
Note
When the user name and...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-76.png "Page 77
Operating Instructions
77
Note
When setting authentication, set the user name and password, and save
them.
When users other than an administrator are accessing the camera, the
[Setup] and [Maintenance] tabs will not be displayed.
The user name and password are case sensitive.
3.Click [Save] when finished.
The new settings are saved.
When finished, Success! is displayed.
4.Click [Go to Security: Administrator page].
The Security: Administrator page is displayed.
Note
When the user name and...")
![Page 78
Operating Instructions
78
Administrator/General Users/Guest Users
The access level to the camera is divided to administrator, general users and guest
users.
Note
Guest users mean unregistered users. Set [Permit access from guest
users] or [Permit access from guest users (mobile only)] on the Security:
Administrator page (see page 75) to allow access from guest users. Items Administrator General
UsersGuest Users Guest Users
(mobile only)
User Name
and PasswordRequired Required Not Required Not...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-77.png "Page 78
Operating Instructions
78
Administrator/General Users/Guest Users
The access level to the camera is divided to administrator, general users and guest
users.
Note
Guest users mean unregistered users. Set [Permit access from guest
users] or [Permit access from guest users (mobile only)] on the Security:
Administrator page (see page 75) to allow access from guest users. Items Administrator General
UsersGuest Users Guest Users
(mobile only)
User Name
and PasswordRequired Required Not Required Not...")
![Page 79
Operating Instructions
79
3.2 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page,
[Login] is displayed at the top of the page. After you log in as an administrator, the
Setup page and the Maintenance page can be accessed.
1.Click [Login] at the top of the page.
2.Check a login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and
password set for General Users or Administrator.
3.Enter a valid user name and...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-78.png "Page 79
Operating Instructions
79
3.2 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page,
[Login] is displayed at the top of the page. After you log in as an administrator, the
Setup page and the Maintenance page can be accessed.
1.Click [Login] at the top of the page.
2.Check a login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and
password set for General Users or Administrator.
3.Enter a valid user name and...")
![Page 80
Operating Instructions
80
3.3 Creating, Modifying or Deleting General
Users
The General User page allows you to create, modify or delete general users. Up to
50 general users can be registered. The access level is set for each general user.
If you set [Permit access from guest users] or [Permit access from guest users
(mobile only)] on the Security: Administrator page, the access level can be set for
guest users.
Note
For general users, the Setup and Maintenance tabs are not displayed.
1.Click...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-79.png "Page 80
Operating Instructions
80
3.3 Creating, Modifying or Deleting General
Users
The General User page allows you to create, modify or delete general users. Up to
50 general users can be registered. The access level is set for each general user.
If you set [Permit access from guest users] or [Permit access from guest users
(mobile only)] on the Security: Administrator page, the access level can be set for
guest users.
Note
For general users, the Setup and Maintenance tabs are not displayed.
1.Click...")
![Page 81
Operating Instructions
81
3.Set each parameter.
Settings for general users Settings for guest users
Clicking [Cancel] takes you back to the previous page without
saving changes.
Setting Description
User ID List Up to 50 general users can be registered.
The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name....](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-80.png "Page 81
Operating Instructions
81
3.Set each parameter.
Settings for general users Settings for guest users
Clicking [Cancel] takes you back to the previous page without
saving changes.
Setting Description
User ID List Up to 50 general users can be registered.
The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name....")
![Page 82
Operating Instructions
82
4.Click [Save] when finished.
The new settings are saved.
When finished, Success! is displayed.
5.Click [Go to General User page].
The General User page is displayed.Setting Description
Access Level An access level is set for each general user. Check each
feature to enable access to it.
In the limit time of continuous Motion JPEG setting, set the
time for changing video (Motion JPEG) to still images for
each user. (Not permitted, Unlimited, 10 seconds—60
minutes) In...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-81.png "Page 82
Operating Instructions
82
4.Click [Save] when finished.
The new settings are saved.
When finished, Success! is displayed.
5.Click [Go to General User page].
The General User page is displayed.Setting Description
Access Level An access level is set for each general user. Check each
feature to enable access to it.
In the limit time of continuous Motion JPEG setting, set the
time for changing video (Motion JPEG) to still images for
each user. (Not permitted, Unlimited, 10 seconds—60
minutes) In...")
![Page 84
Operating Instructions
84
4.2 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows
down.
1.Click [Trigger] on the Setup page.
2.Click a No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for the trigger, and click
[Next>].
Click [Delete Buffered Images] to delete images already buffered.
Click [Save] to save the...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-83.png "Page 84
Operating Instructions
84
4.2 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows
down.
1.Click [Trigger] on the Setup page.
2.Click a No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for the trigger, and click
[Next>].
Click [Delete Buffered Images] to delete images already buffered.
Click [Save] to save the...")
![Page 85
Operating Instructions
85
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 67).
Clicking [].
Clicking [](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-84.png "Page 85
Operating Instructions
85
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 67).
Clicking [].
Clicking [")
![Page 86
Operating Instructions
86
6.Set the image buffer frequency, and click [Next>].
Clicking [](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-85.png "Page 86
Operating Instructions
86
6.Set the image buffer frequency, and click [Next>].
Clicking [")
Operating Instructions 81 3.Set each parameter. Settings for general users Settings for guest users Clicking [Cancel] takes you back to the previous page without saving changes. Setting Description User ID List Up to 50 general users can be registered. The list is used to modify or delete general user settings. User Name/ Password User Name (6 to 15 characters): Enter the user name. Password (6 to 15 characters): Enter the password. Note The password must be different from the user name. Retype Password: Reenter the password. Enter ASCII characters (see page 176). Note that [Space], [], [], [&], [] and [:] are not available.
Operating Instructions 82 4.Click [Save] when finished. The new settings are saved. When finished, Success! is displayed. 5.Click [Go to General User page]. The General User page is displayed.Setting Description Access Level An access level is set for each general user. Check each feature to enable access to it. In the limit time of continuous Motion JPEG setting, set the time for changing video (Motion JPEG) to still images for each user. (Not permitted, Unlimited, 10 seconds—60 minutes) In the refresh interval setting, set the refresh interval after the video has changed to still images. (3—60 seconds) See the corresponding page for details of the following features. Brightness Control (see page 23) External Output Control (see page 23) Change Refresh Interval (see page 23) Change Resolution (see page 23) Change Quality (see page 23) Capture Image Button (see page 22) Listen (see page 25) Talk (see page 25) View Multi-Camera page (see page 27) View Buffered Image page (see page 29)
Operating Instructions 83 4 Buffering or Transferring Images 4.1 Procedures of Buffering or Transferring Images The procedures from this page to page 117 describe settings of the image buffer or transfer. See the procedures below to understand the general outline of the settings. Buffer/Transfer by Timer (Page 84) Transfer Method (Select one from the lists.) No Transfer, No Memory Overwrite No Transfer, Memory Overwrite FTP E-mailTransfer Method (Select one from the lists.) No Transfer, No Memory Overwrite No Transfer, Memory Overwrite FTP E-mailTransfer Method (Select one from the lists.) No Transfer, No Memory Overwrite No Transfer, Memory Overwrite FTP E-mail Buffer/Transfer by Alarm Signal (Page 94) E-mail Notification When Triggered Setting Changing Motion Detection Sensitivity (Page 120) E-mail Notification When Triggered Setting Notifying the Alarm Log (Page 124)Notifying the Alarm Log (Page 124) Buffer/Transfer by Motion Detection Signal (Page 106) Time Setting Image Setting Image Buffer Frequency Setting Time Setting Image Setting Image Buffer Frequency Setting Save the settings to complete. Save the settings to complete. Time Setting Image Setting Image Buffer Frequency Setting Save the settings to complete.
Operating Instructions 84 4.2 Buffering or Transferring Images by Timer The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. Note If you are recording images to the SD memory card, refresh interval slows down. 1.Click [Trigger] on the Setup page. 2.Click a No. to enable buffer/transfer. 3.Check [Enable Image Buffer/Transfer], select [Timer] for the trigger, and click [Next>]. Click [Delete Buffered Images] to delete images already buffered. Click [Save] to save the settings. Clicking [Cancel] takes you back to the Trigger page without saving changes. Note If you click [Save], all buffered images on the internal memory and SD memory card are deleted. Setting Description Enable Image Buffer/Transfer Check the box to enable the buffer/transfer. Uncheck the box to disable it.
Operating Instructions 85 4.Set the time, and click [Next>]. Note The timer works by an internal clock. Set the date and time before using timer buffer/transfer (see page 67). Clicking []. Clicking [
Operating Instructions 86 6.Set the image buffer frequency, and click [Next>]. Clicking [
Operating Instructions 87 7.Select the transfer method, and click [Next>]. Clicking [
Operating Instructions 88 When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. Clicking [
Operating Instructions 89 Overwrite Setting Selecting [Overwrite File] overwrites the image on the server with a newer image. Selecting [Save as New File with Time Stamp] saves the image attaching time stamps on the file name, and the images are not overwritten. E.g. image20060101093020500 .jpg The underlined numbers mean 9h30min20s500ms on January 1, 2006. The letter s is inserted after the day when referring to a daylight saving time zone. Data Transfer Method Select [Passive Mode] normally. If the transfer does not work, select [Active Mode] and check the operation. *1 Note that [Space], [], [], [&], [] are not available. *2 Note that [] is not available. Setting Description
Operating Instructions 90 When you set [E-mail] for Transfer Method Select [E-mail], and click [Next>]. The following page is displayed. Clicking [