Panasonic Network Camera BB HCM403A Operating Guide
Have a look at the manual Panasonic Network Camera BB HCM403A Operating Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 157
Operating Instructions
157
If the following dialog box is displayed, click [Unblock].
You can find the camera IP address and port number by looking up the
MAC address of your camera.
IPv4 Information
IPv6 Information
Note
When trying to find multiple cameras, the MAC address on the bottom of
the camera verifies which camera you are setting up.
See page 159 for details about setup from the MAC address.
Camera
Status
Camera
List window
Displays IPv4 or
IPv6 information. Por t
No. MAC...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-156.png "Page 157
Operating Instructions
157
If the following dialog box is displayed, click [Unblock].
You can find the camera IP address and port number by looking up the
MAC address of your camera.
IPv4 Information
IPv6 Information
Note
When trying to find multiple cameras, the MAC address on the bottom of
the camera verifies which camera you are setting up.
See page 159 for details about setup from the MAC address.
Camera
Status
Camera
List window
Displays IPv4 or
IPv6 information. Por t
No. MAC...")
![Page 158
Operating Instructions
158
Automatic Setup (Local or Internet Access) or Manual Setup
1.
Click [Execute] on the Camera List window shown on page 157.
2.Click the corresponding button.
Note
See Getting Started for local and Internet access setup.
Manual Setup window
Set up each parameter referring to page 40—page 42.
If more than 20 minutes have passed since the camera was turned on, the
camera cannot be set up from the Setup Program. If the camera cannot
be set up, restart the camera.Sets up the...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-157.png "Page 158
Operating Instructions
158
Automatic Setup (Local or Internet Access) or Manual Setup
1.
Click [Execute] on the Camera List window shown on page 157.
2.Click the corresponding button.
Note
See Getting Started for local and Internet access setup.
Manual Setup window
Set up each parameter referring to page 40—page 42.
If more than 20 minutes have passed since the camera was turned on, the
camera cannot be set up from the Setup Program. If the camera cannot
be set up, restart the camera.Sets up the...")
![Page 159
Operating Instructions
159
If Camera setup completed is displayed, click [Close] to finish the
Manual Setup.
3.Close all Setup windows.
Setting up the Camera Using the MAC Address on the Setup
Program
The Setup Program may not list any cameras due to your firewall or antivirus
software settings on your PC. If you cannot disable your firewall or antivirus
software, you can set up the camera using the camera MAC address as shown
below.
1.Enter the camera MAC address in the data field, and click [Set...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-158.png "Page 159
Operating Instructions
159
If Camera setup completed is displayed, click [Close] to finish the
Manual Setup.
3.Close all Setup windows.
Setting up the Camera Using the MAC Address on the Setup
Program
The Setup Program may not list any cameras due to your firewall or antivirus
software settings on your PC. If you cannot disable your firewall or antivirus
software, you can set up the camera using the camera MAC address as shown
below.
1.Enter the camera MAC address in the data field, and click [Set...")
![Page 160
Operating Instructions
160
3.Enter the user name and password, and click [Save].
4.The Enter Network Password window is displayed. Enter the user name and
password that you set above, and click [OK].
5.When the Single Camera page is displayed, the setup is complete.
If a Security Warning window is displayed, click [Yes] (see page 17).
See page 18 for Security Warning window when using Microsoft Windows
XP Service Pack 2.](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-159.png "Page 160
Operating Instructions
160
3.Enter the user name and password, and click [Save].
4.The Enter Network Password window is displayed. Enter the user name and
password that you set above, and click [OK].
5.When the Single Camera page is displayed, the setup is complete.
If a Security Warning window is displayed, click [Yes] (see page 17).
See page 18 for Security Warning window when using Microsoft Windows
XP Service Pack 2.")
![Page 163
Operating Instructions
163
3.Click the [Connections] tab, and click [LAN Settings].
4.See if the Use a proxy server for your LAN check box is checked or not. If
checked, click [Advanced...].
If not checked, click [Cancel]. Proxy settings are not required.
See if this check
box is checked or not.
If checked,
click [Advanced...].](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-162.png "Page 163
Operating Instructions
163
3.Click the [Connections] tab, and click [LAN Settings].
4.See if the Use a proxy server for your LAN check box is checked or not. If
checked, click [Advanced...].
If not checked, click [Cancel]. Proxy settings are not required.
See if this check
box is checked or not.
If checked,
click [Advanced...].")
![Page 164
Operating Instructions
164
5.Enter the camera’s IP address into the Do not use proxy server for addresses
beginning with data field. (Example: 192.168.0.253)
6.Click [OK].
Note
When accessing the camera via a proxy server, the Talk Button is gray.
The Talk feature cannot be used.](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-163.png "Page 164
Operating Instructions
164
5.Enter the camera’s IP address into the Do not use proxy server for addresses
beginning with data field. (Example: 192.168.0.253)
6.Click [OK].
Note
When accessing the camera via a proxy server, the Talk Button is gray.
The Talk feature cannot be used.")
Operating Instructions 161 Note See page 15 for the Single Camera page. If you will enable Internet access to the camera, follow the procedures below. When you are using a router that supports UPnP™ 1.Enable the Auto Port Forwarding feature on the UPnP page (see page 57) 2.Register with the DynamicDNS service on the DynamicDNS page (see page 60) 3.Confirm that the camera can be accessed from the Internet (see page 11). If you cannot access the camera, see page 10 of Troubleshooting on the CD-ROM. When you are using a router that does not support UPnP™ Follow the procedures shown on page 58.
Operating Instructions 162 7.5 Setting Your PC 7.5.1 Setting Proxy Server Settings on a Web Browser If a proxy server is not used, these settings are not required. If you are using a proxy server, perform the proxy server settings below. To communicate with a camera installed within a LAN, changing the web browser settings is recommended. The firewall of a proxy server in a corporate environment may prevent access to the camera. Consult your network administrator. Note A proxy server is used to protect your network when connected to the Internet. The video and audio features cannot be used when the camera is accessed through a proxy server requiring authentication. If the camera is accessed via a proxy server, problems may occur. Consult your network administrator before installing the camera. If the camera is accessed via a proxy server, the refresh interval may be increased. How to Set Proxy Server Settings 1. Start up Internet Explorer. (The example is Internet Explorer 6.0.) 2.Click [Tools] [Internet Options...].
Operating Instructions 163 3.Click the [Connections] tab, and click [LAN Settings]. 4.See if the Use a proxy server for your LAN check box is checked or not. If checked, click [Advanced...]. If not checked, click [Cancel]. Proxy settings are not required. See if this check box is checked or not. If checked, click [Advanced...].
Operating Instructions 164 5.Enter the camera’s IP address into the Do not use proxy server for addresses beginning with data field. (Example: 192.168.0.253) 6.Click [OK]. Note When accessing the camera via a proxy server, the Talk Button is gray. The Talk feature cannot be used.
Operating Instructions 165 7.5.2 Setting UPnP™ to Display Camera Shortcut in My Network Places To display the camera shortcut in the My Network Places folder, a Windows component should be added. Enable UPnP™ (Universal Plug and Play) following the steps below. Note This feature is only available when using Windows XP or Windows Me. 7.5.3 Setting the Internet Temporary File Setting on the Web Browser An old image may be displayed. In this case, change the web browser settings following the steps below.OS Steps Windows XP [Start] ( [Settings]) [Control Panel] [Add or Remove Programs] [Add/Remove Windows Components] Select [Networking Services] [Details] Check [UPnP User Interface] [OK] [Next] Complete Windows XP Service Pack 2[Start] ( [Settings]) [Control Panel] [Add or Remove Programs] [Add/Remove Windows Components] Select [Networking Services] [Details] Check [Internet Gateway Device Discovery and Control Client] and [UPnP User Interface] [OK] Complete Windows Me [Start] [Settings] [Control Panel] [Add/Remove Programs] [Windows Setup] tab Select [Communication] [Details] Check [Universal Plug and Play] [OK] [OK] [Restart] Complete [Tools] [Internet Options] [General] tab [Settings] in the Temporary Internet files Check [Every visit to the page] in the Check for newer versions of stored pages [OK] [OK] Complete
Operating Instructions 166 7.6 Default Setting List Basic Items Default Required Note Network (IPv4)Connection Mode Automatic Setup- Automatic Setup/Static/ DHCP Allow Access from the Internet (Automatic Setup only)No - - Network Configuration from Setup Program (Static/DHCP only)Enable - - Port No. (Static/DHCP only)80 - 20, 21, 25 and 110 is not available *2 IP address (Static only)192.168.0. 253When setting Static*1 Subnet Mask (Static only)255.255. 255.0When setting Static*1 Host Name (DHCP only)[Blank] When setting DHCP (Not always required)0—63 characters*4 Default Gateway (Static/DHCP only)[Blank] When using Gateway*1 DNS Server 1 DNS Server 2 (Static/DHCP only)[Blank] When using DNS*1 Max. Bandwidth Usage (Mbps)Unlimited - 0.1, 0.2, 0.3, 0.5, 1 or Unlimited Connection Type Auto Negotiation- Auto Negotiation, 100 Mbps/Full Duplex, 100 Mbps/Half Duplex, 10 Mbps/Full Duplex, 10 Mbps/Half Duplex
Operating Instructions 167 Network (IPv6)Connection Mode Automatic Setup- Automatic Setup/Static Allow Access from the Internet (Automatic Setup only)No - - Port No. (Static only)80 - 20, 21, 25 and 110 is not available* 2. IP address (Static only)[Blank] When setting Static *1 Default Gateway (Static only)[Blank] When using Gateway*1 DNS Server 1 DNS Server 2[Blank] When using DNS*1 Max. Bandwidth Usage (Mbps)Unlimited - 0.1, 0.2, 0.3, 0.5, 1 or Unlimited Connection Type Auto Negotiation- Auto Negotiation, 100 Mbps/Full Duplex, 100 Mbps/Half Duplex, 10 Mbps/Full Duplex, 10 Mbps/Half Duplex IPsec Use No check - - Encoding strength Standard (AES, 3DES, DES, NULL)- Standard/High Transport [Blank] - - Tunnel [Blank] - - UPnP Auto Por t Forwarding D isable - - Display Shortcut Icon in My Network PlacesEnable - - Items Default Required Note
Operating Instructions 168 Dynamic DNSDynamicDNS Disable -Viewnetcam.com /User-specified DynamicDNS/ Disable DynamicDNS Server URL[Blank]When using User-specified DynamicDNS1—255 characters*8 Updating time 10 min At the time of starting/10, 30(min), 1, 3, 6, 12, 24(h) User Name [Blank] 0—63 characters Password [Blank] 0—63 characters Date and TimeTime Setting AM/PM - AM/PM/24 H Automatic Time AdjustmentNo check When using NTP- NTP Server Address or Host Name[Blank] 1—255 characters *4 Time Zone GMT -05:00 - - Adjust Clock for Daylight Saving TimeNo check - - Start Day Apr, First Sunday, 2 AM-- End Day Oct, Last Sunday, 2 AM-- Camera Camera Name Network CameraRequired 1—15 characters *6 White Balance Auto - Auto/Fixed Indoor/Fixed Fluorescent (White)/Fixed Fluorescent (Daylight)/ Fixed Outdoor/ Hold Color Night View Disable - -Items Default Required Note
Operating Instructions 169 Audio Output Enable - - Volume Standard - Minimum/ Standard/ Maximum PC Audio Input Timeout 1 min - 1, 2, 3, 5, 10, 20, 30, 60 (min) Input Enable - - Camera Microphone SensitivityStandard - Minimum/ Standard/ Maximum Items Default Required Note
Operating Instructions 170 Account Items Default Required Note Security: AdministratorGeneral AuthenticationDo not permit access from guest users -- User Name [Blank] When setting administrator6—15 characters *3 Password [Blank] When setting administrator6—15 characters*3 Retype Password[Blank] When setting administrator6—15 characters*3 General User User ID List [Blank] - - User Name [Blank] When setting general user6—15 characters *3 Password [Blank] When setting general user6—15 characters*3 Retype Password[Blank] When setting general user6—15 characters*3 Limit time of Continuous Motion JPEGNot permitted- Not permitted, Unlimited, 10, 30 (s), 1, 5, 10, 30, 60 (min) Refresh Interval3 s - 3, 5, 10, 30, 60 (s) Access Level No checks - -