Panasonic Network Camera BB HCM403A Operating Guide
Have a look at the manual Panasonic Network Camera BB HCM403A Operating Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
Operating Instructions
96
5.Set the image settings, and click [Next>].
Clicking [].
Clicking [](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-95.png "Page 96
Operating Instructions
96
5.Set the image settings, and click [Next>].
Clicking [].
Clicking [")
![Page 97
Operating Instructions
97
Note
Due to the network environment, object, the number of simultaneous
accesses, enabling IPsec or SD memory recording, the camera may not
record number of images that you set. In this case, set the image buffer
frequency longer.
Set Every [1 s], buffer [1] images for the SD memory recording.
7.Select the transfer method, and click [Next>].
Clicking [](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-96.png "Page 97
Operating Instructions
97
Note
Due to the network environment, object, the number of simultaneous
accesses, enabling IPsec or SD memory recording, the camera may not
record number of images that you set. In this case, set the image buffer
frequency longer.
Set Every [1 s], buffer [1] images for the SD memory recording.
7.Select the transfer method, and click [Next>].
Clicking [")
![Page 99
Operating Instructions
99
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
Clicking [](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-98.png "Page 99
Operating Instructions
99
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
Clicking [")
![Page 100
Operating Instructions
100
Overwrite
Setting Selecting [Overwrite File] overwrites the image on the server
with a newer image. Selecting [Save as New File with Time
Stamp] saves the image attaching time stamps on the file
name, and the images are not overwritten.
E.g. image20060101093020500
.jpg
The underlined numbers mean “9h30min20s500ms on
January 1, 2006”. The letter “s” is inserted after the day when
referring to a daylight saving time zone.
Data
Transfer
Method Select [Passive Mode]...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-99.png "Page 100
Operating Instructions
100
Overwrite
Setting Selecting [Overwrite File] overwrites the image on the server
with a newer image. Selecting [Save as New File with Time
Stamp] saves the image attaching time stamps on the file
name, and the images are not overwritten.
E.g. image20060101093020500
.jpg
The underlined numbers mean “9h30min20s500ms on
January 1, 2006”. The letter “s” is inserted after the day when
referring to a daylight saving time zone.
Data
Transfer
Method Select [Passive Mode]...")
![Page 101
Operating Instructions
101
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
Clicking [](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-100.png "Page 101
Operating Instructions
101
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
Clicking [")
![Page 103
Operating Instructions
103
How to
authenticateThe authentication method can be selected:
[No authentication], [POP before SMTP authentication] or
[SMTP authentication].
POP server authentication may be required by your ISP. In
that case, set POP before SMTP authentication.
No authentication: No authentication when sending an e-
mail.
POP before SMTP authentication: Some SMTP servers
that send e-mails do not have an authentication feature.
Therefore, the camera uses the authentication of a POP...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-102.png "Page 103
Operating Instructions
103
How to
authenticateThe authentication method can be selected:
[No authentication], [POP before SMTP authentication] or
[SMTP authentication].
POP server authentication may be required by your ISP. In
that case, set POP before SMTP authentication.
No authentication: No authentication when sending an e-
mail.
POP before SMTP authentication: Some SMTP servers
that send e-mails do not have an authentication feature.
Therefore, the camera uses the authentication of a POP...")
![Page 104
Operating Instructions
104
8.After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].
If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 102—103.
9.Click [Save] after confirming the settings.
The new settings are saved.
When finished, Success! is displayed.
Note
If you click [Save], all buffered images on the internal memory and SD memory
card are deleted.
10.Click [Go to Trigger page].
...](http://img.usermanuals.tech/thumb/58/72301/w64_bb-hcm403_en_om_d-103.png "Page 104
Operating Instructions
104
8.After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].
If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 102—103.
9.Click [Save] after confirming the settings.
The new settings are saved.
When finished, Success! is displayed.
Note
If you click [Save], all buffered images on the internal memory and SD memory
card are deleted.
10.Click [Go to Trigger page].
...")
Operating Instructions 101 When you set [E-mail] for Transfer Method Select [E-mail], and click [Next>]. The following page is displayed. Clicking [
Operating Instructions 102 Setting Description SMTP Server IP Address or Host Name *1 If you set a server IP address, set 4 numbers (0—255) and 3 periods such as 192.168.0.253. Note that 0.0.0.0 and 255.255.255.255 are not available. Or set a host name (1—255 characters). You can set an IPv6 address. Port No. Enter the number (1—65535). Usually set to 25. Reply E-mail Address *2 Set the senders E-mail address. We recommend you to set the administrators E-mail address. Destination E- mail Address *2 1—3 Set the destination E-mail address (up to 3). Subject *2 Enter a subject with ASCII characters (see page 176) or characters from other languages (0—44 characters for a 1-byte character and 0—22 characters for a 2-byte character). Te x t * 2 Enter text with ASCII characters (see page 176) or characters from other languages (0—63 characters for a 1-byte character and 0—31 characters for a 2-byte character). Note that [end-of-line] key is not available.
Operating Instructions 103 How to authenticateThe authentication method can be selected: [No authentication], [POP before SMTP authentication] or [SMTP authentication]. POP server authentication may be required by your ISP. In that case, set POP before SMTP authentication. No authentication: No authentication when sending an e- mail. POP before SMTP authentication: Some SMTP servers that send e-mails do not have an authentication feature. Therefore, the camera uses the authentication of a POP server that receives e-mails, before sending e-mails. – POP3 Server IP Address or Host Name *1:If you set a server IP address, set 4 numbers (0—255) and 3 periods, such as 192.168.0.253. Note that 0.0.0.0 and 255.255.255.255 are not available. Or set a host name (0— 255 characters). You can set an IPv6 address. – Port No.: Enter a number (1—65535). Usually set to 110. – Login ID *2:If your ISP requires a login ID to log in to a POP3 server, set it (1— 63 characters). –Password *2:If your ISP requires a password to log in to a POP3 server, set it (0— 63 characters). SMTP authentication: Users are authenticated by user name and password on the SMTP server. Your ISP must support the SMTP authentication. The supported SMTP authentications of the camera are the LOGIN and PLAIN authentications. – Login ID *2:If your ISP requires a login ID to log in to an SMTP server, set it (1—63 characters). –Password *2:If your ISP requires a password to log in to an SMTP server, set it (0—63 characters). *1 Note that [Space], [], [], [&], [] are not available. *2 Note that [] is not available. Setting Description
Operating Instructions 104 8.After you confirm the settings and click [Next>], set E-mail notification and click [Next>]. If you select [Enable], the E-mail Notification When Triggered page is displayed. Enter the settings referring to page 102—103. 9.Click [Save] after confirming the settings. The new settings are saved. When finished, Success! is displayed. Note If you click [Save], all buffered images on the internal memory and SD memory card are deleted. 10.Click [Go to Trigger page]. The Trigger page is displayed. Note If you set a short interval when transferring images to a cell phone, many E- mails will be sent, which may lead to a large phone bill. Therefore, we recommend you to set a long interval. 1 image per second frequency is recommended. Alarm transfer stops operating until after the camera finishes all transfers. For example, if the camera transfers 3 images per minute and 6 images in total, alarm detection will follow the pattern below.Setting Description Disable The camera does not send an E-mail notification when buffering or transferring images. Enable The camera sends an E-mail notification (up to 3 destinations) when buffering or transferring images. Detectable DetectableUndetectable 1st 2nd 3rd 4th 5th 6th120 seconds An alarm signal is detected.
Operating Instructions 105 If you are buffering images to the internal memory, the following operations also delete all buffered images. – Turning off or restarting the camera. – Updating the camera. – Resetting the camera to default. – Saving the Date and Time page.
Operating Instructions 106 4.4 Buffering or Transferring Images by Motion Detection Signal Camera has a Motion Detection feature that detects movement, such as people, based on the preset threshold and sensitivity of Camera. You can buffer the camera images, transfer to an FTP server or send E-mails using the Motion Detection function as a trigger. The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. Note The level of motion detection depends on resolution, image quality, and the object being viewed. Check the level by performing motion detection recording. (see page 120). Enabling Motion Detection delays the frame rate of the camera. A change to light or wind conditions may detect motions accidentally. Motion Detection may not work in dark areas. Objects moving fast may not be detected. The Motion Detection is disabled while tilting. 1.Click [Trigger] on the Setup page. 2.Click a No. to enable Trigger. 3.Check [Enable Image Buffer/Transfer], select [Motion Detection] for the trigger, and click [Next>]. Click [Delete Buffered Images] to delete images already buffered.
Operating Instructions 107 Click [Save] to save the settings. Clicking [Cancel] takes you back to the Trigger page without saving changes. Note If you click [Save], all buffered images on the internal memory and SD memory card are deleted. 4.Set the time, and click [Next>]. Clicking [
Operating Instructions 108 5.Set the image settings, and click [Next>]. Clicking []. fif Clicking [
Operating Instructions 109 Note Due to the network environment, object, the number of simultaneous access, enabling IPsec or SD memory recording, the camera may not record number of images that you set. In this case, set the image buffer frequency longer. Set Every [1 s], buffer [1] images for the SD memory recording. 7.Select the transfer method, and click [Next>]. Clicking [
Operating Instructions 110 Setting Description No Transfer, No Memory Overwrite If the internal memory or the SD memory card is full, the camera stops buffering. No Transfer, Memory Overwrite If the internal memory or the SD memory card is full, the camera deletes the old images, and continues to buffer the image. FTP The camera transfers the image to an FTP server (see page 111). E-mail The camera transfers the image by E-mail (see page 113).