Panasonic Network Camera Bb Hcm331a Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Bb Hcm331a Operating Instructions. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Operating Instructions
51[For assistance, please call: 1-800-272-7033]
2.5 Encrypt the Camera Image in Transport Mode
The camera can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.Click [IPsec] on the Setup page.
2.Click Camera in the Transport column.
• If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
3.Enter each parameter in the data field.The display shows that
the communication is in
HTTP and any...](http://img.usermanuals.tech/thumb/58/69502/w300_bb-hcm331a_en_om_d-50.png "Page 51
Operating Instructions
51[For assistance, please call: 1-800-272-7033]
2.5 Encrypt the Camera Image in Transport Mode
The camera can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.Click [IPsec] on the Setup page.
2.Click Camera in the Transport column.
• If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
3.Enter each parameter in the data field.The display shows that
the communication is in
HTTP and any...")
Operating Instructions 51[For assistance, please call: 1-800-272-7033] 2.5 Encrypt the Camera Image in Transport Mode The camera can encrypt the image using IPsec transport mode. Note If you use IPsec, refresh interval slows down. 1.Click [IPsec] on the Setup page. 2.Click Camera in the Transport column. • If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/ Transfer column. 3.Enter each parameter in the data field.The display shows that the communication is in HTTP and any...
Page 52
![Page 52
Operating Instructions
52
4.Click [Save] when finished.
• New settings are saved.
5.Click [Cancel].
• The IPsec page is displayed.
6.Check [Use] in the IPsec column, check encoding strength, and click [Save]. Setting Description
Status • Check the box to use this encryption method.
Pre-Shared Key • It is the key to use in the authentication of communications.
Enter the same pre-shared key as your PC.
• Enter ASCII characters for the host name (see page 140).
But [Space], ["], ['], [&], [] are...](http://img.usermanuals.tech/thumb/58/69502/w300_bb-hcm331a_en_om_d-51.png "Page 52
Operating Instructions
52
4.Click [Save] when finished.
• New settings are saved.
5.Click [Cancel].
• The IPsec page is displayed.
6.Check [Use] in the IPsec column, check encoding strength, and click [Save]. Setting Description
Status • Check the box to use this encryption method.
Pre-Shared Key • It is the key to use in the authentication of communications.
Enter the same pre-shared key as your PC.
• Enter ASCII characters for the host name (see page 140).
But [Space], [\"], ['], [&], [] are...")
Operating Instructions 52 4.Click [Save] when finished. • New settings are saved. 5.Click [Cancel]. • The IPsec page is displayed. 6.Check [Use] in the IPsec column, check encoding strength, and click [Save]. Setting Description Status • Check the box to use this encryption method. Pre-Shared Key • It is the key to use in the authentication of communications. Enter the same pre-shared key as your PC. • Enter ASCII characters for the host name (see page 140). But [Space], ["], ['], [&], [] are...
Page 53
![Page 53
Operating Instructions
53[For assistance, please call: 1-800-272-7033]
7.Click [Restart].
8.Set up your PC as it fits to the requirements on page 49.
• Set the FTP server or E-mail server to transfer images.
9.Access the camera (see page 12).
• If you can access the camera, the IPsec setup is complete.
Notes
• In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
• If you cannot communicate using IPsec, see 2.9 IPsec in the
Troubleshooting section of the...](http://img.usermanuals.tech/thumb/58/69502/w300_bb-hcm331a_en_om_d-52.png "Page 53
Operating Instructions
53[For assistance, please call: 1-800-272-7033]
7.Click [Restart].
8.Set up your PC as it fits to the requirements on page 49.
• Set the FTP server or E-mail server to transfer images.
9.Access the camera (see page 12).
• If you can access the camera, the IPsec setup is complete.
Notes
• In IPsec communications, \"IPsec\" is displayed on the Top page or the
Single Camera page.
• If you cannot communicate using IPsec, see 2.9 IPsec in the
Troubleshooting section of the...")
Operating Instructions 53[For assistance, please call: 1-800-272-7033] 7.Click [Restart]. 8.Set up your PC as it fits to the requirements on page 49. • Set the FTP server or E-mail server to transfer images. 9.Access the camera (see page 12). • If you can access the camera, the IPsec setup is complete. Notes • In IPsec communications, "IPsec" is displayed on the Top page or the Single Camera page. • If you cannot communicate using IPsec, see 2.9 IPsec in the Troubleshooting section of the...
Page 54
![Page 54
Operating Instructions
54
2.6 Encrypt the Camera Image in Tunnel Mode
The camera can encrypt the image using IPsec tunnel mode.
Notes
• Do not set IPsec on the PCs under the VPN router. Communications may
be blocked.
• If you use IPsec, refresh interval slows down.
• The camera can be accessed only from the PCs under the VPN router.
Other PCs cannot access the camera.
1.Click [IPsec] on the Setup page.
2.Click Add in the Tunnel column.
3.Enter each parameter in the data field.](http://img.usermanuals.tech/thumb/58/69502/w300_bb-hcm331a_en_om_d-53.png "Page 54
Operating Instructions
54
2.6 Encrypt the Camera Image in Tunnel Mode
The camera can encrypt the image using IPsec tunnel mode.
Notes
• Do not set IPsec on the PCs under the VPN router. Communications may
be blocked.
• If you use IPsec, refresh interval slows down.
• The camera can be accessed only from the PCs under the VPN router.
Other PCs cannot access the camera.
1.Click [IPsec] on the Setup page.
2.Click Add in the Tunnel column.
3.Enter each parameter in the data field.")
Operating Instructions 54 2.6 Encrypt the Camera Image in Tunnel Mode The camera can encrypt the image using IPsec tunnel mode. Notes • Do not set IPsec on the PCs under the VPN router. Communications may be blocked. • If you use IPsec, refresh interval slows down. • The camera can be accessed only from the PCs under the VPN router. Other PCs cannot access the camera. 1.Click [IPsec] on the Setup page. 2.Click Add in the Tunnel column. 3.Enter each parameter in the data field.
Page 55
![Page 55
Operating Instructions
55[For assistance, please call: 1-800-272-7033]
4.Click [Save] when finished.
• New settings are saved.
5.Click [Cancel].
• The IPsec page is displayed.
6.Check [Use] in the IPsec column, check encoding strength, and click [Save]. Setting Description
Status • Check the box to use this encryption method.
Pre-Shared Key • It is the key to use in the authentication of communications.
Enter the same pre-shared key as your VPN router.
• Enter ASCII characters for the host name (see...](http://img.usermanuals.tech/thumb/58/69502/w300_bb-hcm331a_en_om_d-54.png "Page 55
Operating Instructions
55[For assistance, please call: 1-800-272-7033]
4.Click [Save] when finished.
• New settings are saved.
5.Click [Cancel].
• The IPsec page is displayed.
6.Check [Use] in the IPsec column, check encoding strength, and click [Save]. Setting Description
Status • Check the box to use this encryption method.
Pre-Shared Key • It is the key to use in the authentication of communications.
Enter the same pre-shared key as your VPN router.
• Enter ASCII characters for the host name (see...")
Operating Instructions 55[For assistance, please call: 1-800-272-7033] 4.Click [Save] when finished. • New settings are saved. 5.Click [Cancel]. • The IPsec page is displayed. 6.Check [Use] in the IPsec column, check encoding strength, and click [Save]. Setting Description Status • Check the box to use this encryption method. Pre-Shared Key • It is the key to use in the authentication of communications. Enter the same pre-shared key as your VPN router. • Enter ASCII characters for the host name (see...
Page 56
![Page 56
Operating Instructions
56
7.Click [Restart].
8.Set up your VPN router as shown below.
• To use tunnel mode, you need to set up your VPN router. Setting Description
IPsec • Check the box to enable IPsec features. If you clear the
box, whole IPsec features will be invalid.
Encoding strength • Encoding strength for IPsec can be selected. If you select
[Standard], DES or NULL is valid as an algorithm, and then
the data will become easier to be decrypted.
IKE Items Settings
Phase 1 Authentication...](http://img.usermanuals.tech/thumb/58/69502/w300_bb-hcm331a_en_om_d-55.png "Page 56
Operating Instructions
56
7.Click [Restart].
8.Set up your VPN router as shown below.
• To use tunnel mode, you need to set up your VPN router. Setting Description
IPsec • Check the box to enable IPsec features. If you clear the
box, whole IPsec features will be invalid.
Encoding strength • Encoding strength for IPsec can be selected. If you select
[Standard], DES or NULL is valid as an algorithm, and then
the data will become easier to be decrypted.
IKE Items Settings
Phase 1 Authentication...")
Operating Instructions 56 7.Click [Restart]. 8.Set up your VPN router as shown below. • To use tunnel mode, you need to set up your VPN router. Setting Description IPsec • Check the box to enable IPsec features. If you clear the box, whole IPsec features will be invalid. Encoding strength • Encoding strength for IPsec can be selected. If you select [Standard], DES or NULL is valid as an algorithm, and then the data will become easier to be decrypted. IKE Items Settings Phase 1 Authentication...
Page 57
![Page 57
Operating Instructions
57[For assistance, please call: 1-800-272-7033] • Set up the IPsec policy as the following.
9.Access the camera (see page 12).
• If you can access the camera, the IPsec setup is complete.
Notes
• In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
• If you cannot communicate using IPsec, see 2.9 IPsec in the
Troubleshooting section of the Installation/Troubleshooting.
• See the Panasonic Network Camera support website at...](http://img.usermanuals.tech/thumb/58/69502/w300_bb-hcm331a_en_om_d-56.png "Page 57
Operating Instructions
57[For assistance, please call: 1-800-272-7033] • Set up the IPsec policy as the following.
9.Access the camera (see page 12).
• If you can access the camera, the IPsec setup is complete.
Notes
• In IPsec communications, \"IPsec\" is displayed on the Top page or the
Single Camera page.
• If you cannot communicate using IPsec, see 2.9 IPsec in the
Troubleshooting section of the Installation/Troubleshooting.
• See the Panasonic Network Camera support website at...")
Operating Instructions 57[For assistance, please call: 1-800-272-7033] • Set up the IPsec policy as the following. 9.Access the camera (see page 12). • If you can access the camera, the IPsec setup is complete. Notes • In IPsec communications, "IPsec" is displayed on the Top page or the Single Camera page. • If you cannot communicate using IPsec, see 2.9 IPsec in the Troubleshooting section of the Installation/Troubleshooting. • See the Panasonic Network Camera support website at...
Page 58
Operating Instructions 58 2.7 Using UPnP™ (Universal Plug and Play) UPnPTM can automatically configure your router to be accessed from the Internet. In order to use this feature, your router needs to support this feature and it must be enabled. Most router manufacturers disable this feature as the default setting. See http://panasonic.co.jp/pcc/products/en/netwkcam/technic/rtr_setup/ for details and see your router manual for how to enable UPnP TM. After the UPnPTM is enabled on the router, set...
Page 59
![Page 59
Operating Instructions
59[For assistance, please call: 1-800-272-7033]
3.Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
4.Click [Go to UPnP page].
• The UPnP page is displayed.](http://img.usermanuals.tech/thumb/58/69502/w300_bb-hcm331a_en_om_d-58.png "Page 59
Operating Instructions
59[For assistance, please call: 1-800-272-7033]
3.Click [Save] when finished.
• New settings are saved.
• When finished, \"Success!\" is displayed.
4.Click [Go to UPnP page].
• The UPnP page is displayed.")
Operating Instructions 59[For assistance, please call: 1-800-272-7033] 3.Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed. 4.Click [Go to UPnP page]. • The UPnP page is displayed.
Page 60
Operating Instructions 60 2.8 Registering with the Viewnetcam.com service Viewnetcam.com is a free service (dynamic DNS service) that allows you to assign an easy to remember name to the camera, similar to your favorite web site. Viewnetcam.com also allows you to easily access the camera, even when your ISP changes the IP address. Panasonic Communications recommends you to register with it for the Internet access to the camera. See http://www.viewnetcam.com f o r details about the Viewnetcam.com...