Panasonic Network Camera Bb Hcm331a Operating Instructions

Operating Instructions
21[For assistance, please call: 1-800-272-7033]
1.2.3 Using Operation Bar
End Display 
and Preset 
Display:When the pan/tilt has reached the end (Left End, 
Right End, Up End and Down End), End Display 
appears. When clicking a preset button, the preset 
name appears.
Pan/Tilt 
Scan:Moves the lens throughout the horizontal ( ) or 
vertical ( ) range, and returns to the original 
position.
Pan/Tilt/
Home 
Position:Controls lens direction.
Pan ( : Left,  : Right), Tilt ( : Up, 
:...

Operating Instructions
22
Note
When the camera image is not displayed correctly, click [Refresh] at the tool 
bar on the web browser. The image will be refreshed.
Pan/Tilt Operation
Pan/Tilt Range
Note
When the pan/tilt reaches the end, a shadow may be displayed partially. This 
is not a problem. Pan/tilt scan buttons automatically move the 
lens horizontally from -60 ° to +60 ° and 
vertically from -45 ° to +20 ° and return the 
lens to the original position. Each pan/tilt 
arrow moves the lens Up,...

Operating Instructions
23[For assistance, please call: 1-800-272-7033]
1.2.4 Setting Home Position/Alarm Position/Preset Button
Registering Home Position/Alarm Position
A home position or 2 alarm positions can be registered. When restarted, the 
camera takes a home position. If the Lens Position When Triggered setting is set 
(see page 94), the camera takes a alarm position after the External I/O detects a 
signal. See page 119 for the External I/O.
1.Click [Program].
• [Program] switches to [Cancel]....

Operating Instructions
24
Registering a Preset Button
8 camera positions can be stored as presets. By default, the preset buttons (1—4) 
are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4: Lower Right. 
These buttons can be changed (see page 26).
• Registered buttons are shown in blue.
• Unregistered buttons are shown in white.
1.Click [Program].
• [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
3.Click a...

Operating Instructions
25[For assistance, please call: 1-800-272-7033]
Viewing the Image
1.
Click the home position, alarm 
position or registered preset button.
• The camera takes each position, 
and the image is displayed.
Alarm 
Position
Pan/Tilt
Putting the 
cursor displays 
the preset 
name.Home 
Position
UpperLeft 

Operating Instructions
26
Changing or Deleting the Settings
1.
Click [Program].
• [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
3.Click the home position, alarm position 
or a preset button (1—8).
4.Click [Save] after setting the preset 
name or click [Delete].
• If you quit to change or delete 
settings, click [Back], and then 
[Cancel].
• If "Success!" is displayed, click 
[Back].
Note
The home position or the...

Operating Instructions
27[For assistance, please call: 1-800-272-7033]
1.3 Listening to Camera Audio—Talking to the 
Camera
1.Access the camera (see page 12).
• The Top page is displayed.
2.Click the [Single] tab at the top of the page.
3.The audio control bar is displayed at the top of the screen. Listening or Talking 
is selected using the 2 icons. For general users, the feature must be enabled, 
otherwise it will not be displayed.
Audio Feature
Notes
• Talk button and Listen button cannot be used...

Operating Instructions
28
• Audio features such as camera microphone sensitivity and mute during pan/tilt 
can be set up on the Audio page (see page 68).
• If you are running other applications or opening multiple windows, the audio 
may be interrupted or delayed.
• When the image is refreshed during any operation such as preset registration 
or a web browser refresh, the volume is reset to the default (midrange) 
position. Audio that was muted is enabled.
• The audio may be interrupted due to your...

Operating Instructions
29[For assistance, please call: 1-800-272-7033] • The external microphone input terminal does not correspond to an line level. 
Audio may be distorted when the line level is input. Audio distortion will be 
solved if you insert the following circuits. Under no circumstance should high 
level audio, such as from a speaker, be connected to this input terminal. Doing 
so is likely to damage the camera.
Camera
External Microphone 
Input TerminalAudio Line 
Out Capacitor Resister
1   F...

Operating Instructions
30
1.4 Viewing Multi-Camera page
To view multiple cameras on the Multi-Camera page, you need to configure each 
camera on the Multi-Camera Setup page (see page 79).
1.Access the camera (see page 12).
• The Top page is displayed.
2.Click the [Multi] tab at the top of the page.
• Multi-Camera page can display up to 12 camera images.
3.Close the web browser.
Notes
• When selecting [All] at the View Type, all images are displayed in 160 x 
120 pixels resolution.
• 640 x 480 pixels...