Panasonic Network Camera Bb Hcm331a Operating Instructions

Operating Instructions
91[For assistance, please call: 1-800-272-7033]
8.Confirm the settings, and click [Save].
• New settings are saved.
• When finished, "Success!" is displayed.
9.Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed.
Notes
• If you click [Save] on the Image Buffer/Transfer page, all buffered images 
on the SD memory card are deleted.
• If you are buffering images on the internal memory, the following 
operations also delete all buffered...

Operating Instructions
92
2.20 Buffering or Transferring Images by Alarm 
Signal
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for trigger, select 
[Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and click...

Operating Instructions
93[For assistance, please call: 1-800-272-7033]
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 62).
• Clicking [

Operating Instructions
94
5.Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the camera turns to the alarm position.
• Clicking [].
• Clicking [

Operating Instructions
95[For assistance, please call: 1-800-272-7033]
7.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
SD memory recording, the camera may not record the numbers of images as 
you set. In this case, set the image buffer frequencies longer. For the SD 
memory recording, 1 image per second setting is recommended.
• Clicking [

Operating Instructions
96
8.Select the transfer method, and click [Next>].
• Clicking [

Operating Instructions
97[For assistance, please call: 1-800-272-7033] When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
• Clicking [

Operating Instructions
98
Setting Description
Server IP 
Address or 
Host Name
*1
*1But [Space], ["], ['], [&], [] are not available.
• If you set the server IP address, set 4 digits (0—255) and 3 
periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
• You can set IPv6 address.
Port No. • Enter the number (1—65535). Usually set to 21.
Login ID
*1• If your ISP requires a login ID, set it (0—63...

Operating Instructions
99[For assistance, please call: 1-800-272-7033] When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
• Clicking [

Operating Instructions
100
Setting Description
SMTP Server IP 
Address or Host 
Name• If you set the server IP address, set 4 digits (0—255) and 
3 periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name 
(1—255 characters).
• You can set IPv6 address.
POP3 Server IP 
Address or Host 
Name• If you set the server IP address, set 4 digits (0—255) and 
3 periods such as "192.168.0.253". But "0.0.0.0" and...