Panasonic Network Camera Bb Hcm331a Operating Instructions

Operating Instructions
121[For assistance, please call: 1-800-272-7033]
3.4 FACTORY DEFAULT RESET Button
The camera has a FACTORY DEFAULT RESET button on the side.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory 
default. If you lose your user name and password, use this button to reset the 
camera.
• Press the FACTORY DEFAULT RESET button for 1 second when the camera 
is on.
• The indicator blinks orange, and then turns off for 5 seconds.
• Do not turn off the camera until the...

Operating Instructions
122
3.5 RESTART Button
The camera has a RESTART button on the side.
Pressing the RESTART button restarts the camera.
Notes
• After removing the sunshade, press the RESTART button.
• All buffered images on the internal memory are deleted when restarting 
the camera. The buffered images on the SD memory card are not deleted.
• Restarting takes 1 minute.
RESTART Button
(Press the button with a pointed object.) 

Operating Instructions
123[For assistance, please call: 1-800-272-7033]
3.6 Default Setting List
Basic
Items Default Required Notes
Network 
(IPv4)Connection Mode Automatic 
Setup- Automatic Setup/
Static/DHCP
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Network Configuration 
from Setup Program 
(Static/DHCP only)Enable - -
Port No. 
(Static/DHCP only)80 - 20, 21, 25 and 110 
is not available.
IP address 
(Static only)192.168.0.
253When 
setting Static*1
Subnet Mask 
(Static...

Operating Instructions
124
Network 
(IPv6)Connection Mode Automatic 
Setup- Automatic Setup/
Static
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Port No. 
(Static only)80 - 20, 21, 25 and 110 
is not available.
IP address 
(Static only)[Blank] When 
setting Static*1
Default Gateway (Static 
only)[Blank] When using 
Gateway*1
DNS Server 1
DNS Server 2[Blank] When using 
DNS*1
Max. Bandwidth Usage 
(Mbps)Unlimited - 0.1, 0.2, 0.3, 0.5, 1 
or Unlimited
Connection Type Auto 
Negotiation--...

Operating Instructions
125[For assistance, please call: 1-800-272-7033] Date and 
TimeTime Setting AM/PM - -
Automatic Time 
AdjustmentNo check When using 
NTP-
Time Zone GMT -05:00 - -
Adjust Clock for 
Daylight Saving TimeNo check - -
Sta r t  D ay A pr,
First Sunday,
2 AM--
End Day Oct,
Last Sunday,
2 AM--
Camera Camera Name Network
CameraRequired 1—15 characters
*6
White Balance Auto - Auto/Fixed Indoor/
Fixed Fluorescent 
(White)/Fixed 
Fluorescent 
(Daylight)/Fixed 
Outdoor/Hold
Pan Range (Minimum)...

Operating Instructions
126
Account
Audio Output  Enabled - -
Volume Standard - Minimum/
Standard/
Maximum
PC Audio Input Timeout  1 min - 1, 2, 3, 5, 10, 20, 
30, 60 (min)
Input Enable - -
Camera Microphone 
SensitivityStandard - Minimum/
Standard/
Maximum
Mute during Pan/Tilt Enable - -
Items Default Required Notes
Security: 
AdministratorGeneral 
AuthenticationDo not permit 
access from 
guest users --
User Name [Blank] When setting 
administrator6—15 characters 
*3
Password [Blank] When setting...

Operating Instructions
127[For assistance, please call: 1-800-272-7033] General User User ID List [Blank] - -
User Name [Blank] When setting 
general user6—15 characters 
*3
Password [Blank] When setting 
general user6—15 characters 
*3
Retype 
Password[Blank] When setting 
general user6—15 characters 
*3
Limit time of 
Continuous 
Motion JPEGNot permitted - Not permitted, 
Unlimited, 10, 30 
(s), 1, 5, 10, 30, 60 
(min)
Refresh 
Interval3 s - 3, 5, 10, 30, 60 (s)
Access Level No checks - - Items Default...

Operating Instructions
128
Advanced
Items Default Required Notes
Image 
DisplaySingle Camera Image 
Resolution320 x 240 - 320 x 240 or 640 
x 480
Single Camera Image 
QualityStandard - Favor Clarity, 
Standard or 
Favor Motion
Single Camera 
Refresh IntervalMotion - 3, 5, 10, 30, 60 
(s) or Motion
Multi-Camera Image 
Resolution320 x 240 - 160 x 120 or 320 
x 240
Multi-Camera Image 
QualityStandard - Favor Clarity, 
Standard or 
Favor Motion
Multi-Camera Refresh 
IntervalMotion When 
reducing 
traffic3,...

Operating Instructions
129[For assistance, please call: 1-800-272-7033] Multi-
CameraMulti-Camera [Blank] - -
Display Checked When setting 
Multi-Camera-
IP Address or Host 
Name[Blank] When setting 
Multi-CameraIP address*1 
Host name*5 is 
1—255 
characters.
Port No. [Blank] When setting 
Multi-Camera20, 21, 25 and 
110 are not 
available.
Camera Name [Blank] When setting 
Multi-Camera1—15 characters
*7
Buffer/
TransferStat u s Off - -
Trigger Timer - -
Active Time of Trigger Always - -
Image Setting...

Operating Instructions
130
Preset Buttons
Indicator 
ControlIndicator Control Turn indicator 
on when 
camera is on--
Items Default Required Notes
Preset 
ButtonsPreset 1 UpperLeft - -
Preset 2 UpperRight - -
Preset 3 LowerLeft - -
Preset 4 LowerRight - -
*1 In IPv4, set 4 digits (0—255) and 3 periods such as "192.168.0.253". But 
"0.0.0.0" and "255.255.255.255" are not available.
In IPv6, set 8 hexadecimal digits divided with ":". Consecutive 0s can be 
abbreviated as...