Panasonic Multi-Function Printer Dp Mb350 Operating Instructions

9. Programmable Features61
Setting toner save feature
{#}{4}{ 8}{ 2} {
0 } “Off”  (default): Deactivates this feature.
{ 1 } “On”: The toner cartridge will last longer.
Note: L This feature may lower the print qua lity by reducing toner consumption.
L This setting is valid for copying, and  when the unit automatically prints 
reports/lists.
L This setting is invalid for printing received faxes.
Viewing the counter
{#}{ 4}{ 8}{ 4} To confirm the count number of prints.
1.
{Menu } i  {#}{ 4}{ 8}{ 4}
2....

9. Programmable Features
62
9.3 Fax features
Feature/CodeSelection
Erasing all items stored for 
the navigator directory
{#}{ 2}{ 8}{ 9} {
0 } “No” (default)
{ 1 } “Yes”
L Disconnect the telephone line cord, USB cable and LAN cable before 
activating this feature.
To erase all items:
1. {Menu } i  {#}{ 2}{ 8}{ 9}
2. Press  {1 } to select  “Yes”. i {Set }
3. Press  {1 } to select  “Yes”. i {Set } i  {Menu }
Printing a conf irmation report
{#}{ 4}{ 0}{ 1} {
0 } “Off” : Confirmation reports will not be...

9. Programmable Features63
Sending a fax at a specific 
time
{#}{4}{ 1}{ 2} This feature allows you to take advantage of low-cost calling hours offered by 
your telephone company. This feature can be set up to 24 hours in advance of 
the desired time.
{
0 } “Off”  (default)
{ 1 } “On”
To send a document:
1. If the  {Fax } light is OFF, turn it ON by pressing  {Fax }.
2. Set the original (page 19).
3. {Menu } i  {#}{ 4}{ 1}{ 2}
4. Press  {1 } to select  “On”. i {Set }
5. Enter the fax number.
L To enter...

9. Programmable Features
64
Setting the ring pattern for fax 
(Distinctive Ring feature)
{#}{4}{ 3}{ 1} {
1 } “A”
{ 2 } “B”
{ 3 } “C”
{ 4 } “D”
{ 5 } “B-D”  (default)
See page 56 for details.
Setting auto reduction 
feature
{#}{ 4}{ 3}{ 2} To receive a fax document that is longer than your recording paper.
{
0 } “Off” : The unit will print received documents at their original size.
{ 1 } “On” (default): The unit will fit received documents onto your recording 
paper.
Changing the f ax activation 
code...

9. Programmable Features65
Receiving a fax into the 
computer
{#}{4}{ 4}{ 2} If you wish to receive a fax into a computer, activate this feature and run 
[PC 
FA X ] from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature 
#448 on page 52).
{ 0 } “Off”  (default): Deactivates this feature.
{ 1 } “Always ”: If the unit recognizes the connection to the computer, it will 
transfer received documents to the computer. If the unit cannot recognize the...

9. Programmable Features
66
Setting the information for 
saving a fax document as an 
email attachment (via an 
email server) (LAN 
connection only)L This feature can be 
programmed only through 
the web browser interface. When you save the fax document as an 
email attachment, you need to program 
the email server and SMTP server settings beforehand. Consult your service 
provider or network administrator for details.
1. Start Multi-Function Station.
2. [Utilities ] i  [Configuration Web Page ] i  [...

9. Programmable Features67
9.4 Copy features
Feature/CodeSelection
Setting the paper input tray to 
use for copy
{#}{ 4}{ 6}{ 0} This feature will be displayed only when the lower input tray is installed (page 
79).
{
1 } “#1” (default): Standard input tray
{ 2 } “#2”: Lower input tray
{ 3 } “#1+#2 ”
Note: L To select  “#2”, select  “Plain Paper ” or “Thin Paper ” for the recording 
paper type setting (feature #383 on page 60).
L To select  “#1+#2”,
– select the same paper size for the standard input...

9. Programmable Features
68
Setting the paper input tray 
prompt for copy
{#}{4}{ 7}{ 1} This feature will be displayed only when the lower input tray is installed (page 
79).
{
0 } “Off” : Deactivates this feature.
{ 1 } “ Auto ” (default): When making a copy, you will be prompted to select the 
desired paper input tray if the recording paper size setting is different for the 
standard input tray (feature #380 on pa ge 59) and the lower input tray (feature 
#382 on page 59).
{ 2 } “Always ”: When making...

9. Programmable Features69
9.5 PC print features
Feature/CodeSelection
Setting the paper input tray in 
PCL
{#}{ 7}{ 6}{ 0} This feature will be displayed only when the lower input tray is installed (page 
79).
{
1 } “#1” (default): Standard input tray
{ 2 } “#2”: Lower input tray
{ 3 } “#1+#2 ”
Note: L To select  “#2”, select  “Plain Paper ” or “Thin Paper ” for the recording 
paper type setting (feature #383 on page 60).
L To select  “#1+#2”,
– select the same paper size for the standard input tray...

9. Programmable Features
70
Setting the font number in 
PCL
{#}{7}{ 6}{ 9} To set the font number to be used in PCL printing. The unit assigns a number 
to each font.
1.
{Menu } i  {#}{ 7}{ 6}{ 9} i  {Set }
2. Enter the font number from  “000” to “054”, using the dial keypad.
L The default setting is  “000”.
3. {Set } i  {Menu }
Note: L If the font source in PCL (feature #768 on page 69) is set to  “Download 
Font ”, the default setting is  “001 ”.
L To print the font list, see page 103.
Setting the font...