Home
>
Panasonic
>
Video Recorder
>
Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions
Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions
Here you can view all the pages of manual Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions . The Panasonic manuals for Video Recorder are available online for free. You can easily download all the documents as PDF.
Page 71
– 71– – 71– VIDEO OUT SET UP STATE menu ∑Selecting the TAPE/EE output signals The video, audio and cue signals which are output during the VTR’s operation are switched on this menu to TAPE or EE signals. (1) Press the center cursor key to display the cursor. (2) Move the cursor to the desired position using the cursor keys. ≥The cursor will not move to places which cannot be set. (3) Press the center cursor key to select TAPE or EE. Refer to the following table for the types of setting options.Center...
Page 72
– 72– AUDIO OUT SDI ASIGN menu This menu is displayed by pressing the following keys:>F9AUDIO OUT F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1 SD_ AUD 24bit
Page 73
– 73– Description Selects the channels whose signals are to be output to HD SDI embedded audio channels 1 through 4. CH 1–4:The signals of CH1 through CH4 are output. CH5 – 8:The signals of CH5 through CH8 are output. OFF:No signals are output. Selects the channels whose signals are to be output to HD SDI embedded audio channels 5 through 8. CH1 – 4:The signals of CH1 through CH4 are output. CH 5–8:The signals of CH5 through CH8 are output. OFF:No signals are output. Selects the channels whose signals...
Page 74
– 74– TC/CHR menu This menu is displayed by pressing the following key:TC/CHR F13 F12 F11 F10 F9 F8 F7 F6 F5 F4 F3 F2 F1
Page 75
![Page 75
– 75–
TC/CHR menu
Description
INT
:Built-in time code generator.
EXT LTC:LTC time code from TIME CODE input connector.
S LTC:LTC time code added to serial signals; not displayed
when the SD mode is selected.
S VTC:VTC time code added to serial signals; not
displayed when the SD mode is selected.
EXT VITC:VITC time code added to video signals; not
displayed when the HD mode is selected.
≥When the F1 (SOURCE) key is at [INT], AUTO, PRESET and
SALVE are displayed.
AUTO
:Generator locks at the value read out...](http://img.usermanuals.tech/thumb/58/68224/w300_ajhd3700b-1_en_om_d-74.png "Page 75
– 75–
TC/CHR menu
Description
INT
:Built-in time code generator.
EXT LTC:LTC time code from TIME CODE input connector.
S LTC:LTC time code added to serial signals; not displayed
when the SD mode is selected.
S VTC:VTC time code added to serial signals; not
displayed when the SD mode is selected.
EXT VITC:VITC time code added to video signals; not
displayed when the HD mode is selected.
≥When the F1 (SOURCE) key is at [INT], AUTO, PRESET and
SALVE are displayed.
AUTO
:Generator locks at the value read out...")
– 75– TC/CHR menu Description INT :Built-in time code generator. EXT LTC:LTC time code from TIME CODE input connector. S LTC:LTC time code added to serial signals; not displayed when the SD mode is selected. S VTC:VTC time code added to serial signals; not displayed when the SD mode is selected. EXT VITC:VITC time code added to video signals; not displayed when the HD mode is selected. ≥When the F1 (SOURCE) key is at [INT], AUTO, PRESET and SALVE are displayed. AUTO :Generator locks at the value read out...
Page 76
![Page 76
– 76–
TC/CHR menu
Description
ON
:CF BIT is recoorded.
OFF:CF BIT is not recorded.
≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key,
the VTR conforms to the external color frame bit.
Transfers the VTR to the TC/CHR SET UP menu screen.
Transfers the VTR to the TC/CHR CONVERT menu screen.
LTC:LTC is read out all the time.
AUTO
:At low speed, VITC is read preferentially. When it is not
read, then LTC is read.
VITC:VITC is read out all the time.
≥In either setting, when the time code cannot be...](http://img.usermanuals.tech/thumb/58/68224/w300_ajhd3700b-1_en_om_d-75.png "Page 76
– 76–
TC/CHR menu
Description
ON
:CF BIT is recoorded.
OFF:CF BIT is not recorded.
≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key,
the VTR conforms to the external color frame bit.
Transfers the VTR to the TC/CHR SET UP menu screen.
Transfers the VTR to the TC/CHR CONVERT menu screen.
LTC:LTC is read out all the time.
AUTO
:At low speed, VITC is read preferentially. When it is not
read, then LTC is read.
VITC:VITC is read out all the time.
≥In either setting, when the time code cannot be...")
– 76– TC/CHR menu Description ON :CF BIT is recoorded. OFF:CF BIT is not recorded. ≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key, the VTR conforms to the external color frame bit. Transfers the VTR to the TC/CHR SET UP menu screen. Transfers the VTR to the TC/CHR CONVERT menu screen. LTC:LTC is read out all the time. AUTO :At low speed, VITC is read preferentially. When it is not read, then LTC is read. VITC:VITC is read out all the time. ≥In either setting, when the time code cannot be...
Page 77
– 77– TC/CHR menu ∑Changing the superimposing position (1) Move the position using the cursor keys. ≥When a cursor key is held down, the cursor will move more quickly. ≥When the center cursor key is pressed, the superimposing re- turns to its initial position. Center cursor key Cursor keys ∑Time code displays and VTR’s operating modes Display the time codes and VTR’s operating modes as required. Time code displays CTL1:Control signal 1TCG:Value generated by time code generator CTL2:Control signal...
Page 78
– 78– TC/CHR menu ∑Time code displays and VTR’s operating modes (continued) VTR’s operating modes STOP F.FWD PREVIEW REW REVIEW EDIT PLAY (edit playback) PREROLL EDIT REC (edit recording) AUTO EDIT (automatic editing) CUE UP JOG STANDBY OFF VAR EJECT SHTL DMC PREVIEW REC DMC EDIT REC (display blinks during Pre-CTL operation) OUT PREVIEW PLAY DMC SAMPLE (variable memory speed sampling underway) P PLY (programmed playback) DMC PLAY (variable memory playback underway) TSO (TAPE SPEED OVERRIDE) AUTO OFF ≥In...
Page 79
– 79– TC/CHR menu ∑Superimposed displays When TC.TC is selected as the SUPER setting, the time code appears as a 2-level display. (The HD SUPER and SD SUPER are linked.) The converted time code is displayed on the top level of the superim- posed display. On the bottom level, the display can be switched between the original time code recorded on the tape and the converted time code. Depending on the settings of the F11 and F12 keys on the TC/CHR CONVERT menu, the display patterns are as shown below. “C”...
Page 80
– 80– TC/CHR menu Table of user bit settings F1 (SOURCE) INT (internal) TC S LTC S VITC EXT LTC EXT LTC F2 (TC SLAVE) —— —— SLAVE DIRECT F3 (UB SLAVE) ON OFF ON OFF ON OFF F10 (TCR) LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUTO VITC LTC AUDIO VITC LUBG mode REGEN INT UB PRESET INT UB EXT REGEN INT UB PRESET INT UB DIRECT VUBG mode INT UB REGEN INT UB PRESET INT UB EXT REGEN INT UB PRESET INT UB EXT REGEN INT UB PRESET° °The user bit can be set in all modes except for recording....