Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

– 51–
AUDIO IN PCM INPUT SELECT menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
Key designation
CH-1
For selecting the recording
signals of digital audio
CH1.
CH-2
For selecting the recording
signals of digital audio
CH2.
DIGITAL
For selecting the CH1 and
CH2 digital input signals.
CH-3
For selecting the recording
signals of digital audio
CH3.
CH-4
For selecting the recording
signals of digital audio
CH4.
DIGITAL
For selecting the CH3 and
CH4 digital input signals.
DIGITAL
For selecting the CH5 and
CH6 digital input...

– 52–
AUDIO IN PCM INPUT SELECT menu
Key
F10
F11
F12
F13
Key designation
CH-6
For selecting the recording
signals of digital audio
CH6.
DIGITAL
For selecting the CH7 and
CH8 digital input signals.
CH-7
For selecting the recording
signals of digital audio
CH7.
CH-8
For selecting the recording
signals of digital audio
CH8.
Description
ANA CH2:Selects the signals of the analog CH2 input
connector.
DIGITAL
:Selects the digital audio input signals (AES/SDI
selection is made in line with the CH5 setting using...

– 53–
AUDIO IN CUE INPUT SELECT menu
This menu is displayed by pressing the following keys:>
The below screen will be appeared when the menu is in the D-MIX status by pressing the F9 (D-MIX) key.
F7AUDIO IN
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 54–
AUDIO IN CUE INPUT SELECT menu
Key
F1
F2
F3
F4
F5–F7
F8
F9
F10
F11
F12
F13
Key designation
CH-1
For setting cue mixing for
CH1.
CH-2
For setting cue mixing for
CH2.
CH-3
For setting cue mixing for
CH3.
CH-4
For setting cue mixing for
CH4.
——
EXIT
CUE
For selecting the cue
audio recording signals.
CH-5
For setting cue mixing for
CH5.
CH-6 
For setting cue mixing for
CH6.
CH-7
For setting cue mixing for
CH7.
CH-8
For setting cue mixing for
CH8.
Description
(displayed only when D-MIX is set using F9)...

– 55–
AUDIO IN SET UP menu
This menu is displayed by pressing the following keys:>
OR
>
F6SET UP
F8AUDIO IN
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 56–
AUDIO IN SET UP menu
Key
F1
F2–F5
F6
F7
F8
F9
F10
F11
F12–F13
Key designation
INT SG MD
——
PEAK HOLD
For setting the peak hold.
SCALE
For switching the level
meter scale.
EXIT
DATA ADV°
1
STYLE°1
For setting the digital
audio input/output data
format.
RATE CON°3
——
Description
For selecting the internal audio test signal.
TONE
:Reference level sinusoidal waves are output.
SILENCE:A signal tone is not output. (Mute signals are output.)
For holding the peak recording and playback levels on the...

– 57–
AUDIO IN SET UP menu
F11 (RATE CON) key
∑Operation
≥The menu item is set to ON or OFF for both the recording and playback systems simultane-
ously: it is not possible to select the item’s setting for recording or playback only.
≥Similarly, the menu item is set to ON or OFF for all channels CH1 to CH8 (or CH1 to CH4) 
simultaneously: it is not possible to select the item’s setting for specific channels only.
≥If the DATA mode has been selected using F10 (STYLE) when the system format is 1080/59i
4ch...

– 58 –
AUDIO IN CH-MIX SELECT menu
This menu is displayed by pressing the following keys:>F9AUDIO IN
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1
F2–F5
F6
F7
F8
F9–F13
Key designation
SELECT
——
CH-MIX (ON)
For mixing the input
signals with the signals
played back
simultaneously and
recording them.
CH-MIX (OFF)
For prohibiting the mixing
of the input signals and
signals played back
simultaneously and their
recording.
EXIT
——
Description
Selects the channels whose signals are to be mixed.
CH1-CH4
:The...

– 59–
AUDIO IN CH-MIX SELECT menu
∑Mix-and-record
(1) Press the F6 (CH-MIX) key to set it ON.
The mixing graph display now appears.
(2) Press the center cursor key to display the cursor.
(3) Use the cursor keys to move the cursor to the channel in which the sound is to be mixed.
(4) Press the center cursor key to select the signals to be mixed.
The desired signals can be set on a channel by channel basis.
The following signals can be set:
CH-1S CH-2S CH-3S CH-4S CH-5S CH-6S CH-7S CH-8S (input
signals of...

– 60–
AUDIO IN CH-MIX SELECT menu
∑Mix-and-record (continued)
(5) Move the cursor to the mixing ratio display area, and turn the ADJUST control to set the ratio
at which the signals are to be mixed (in 1% increments).
Mixing ratio display area
ONotesN
≥When the PLAY button is pressed after the CH-MIX mode has been set, the F6 (CH-MIX) key
keeps blinking. The regular playback sound is output at this time.
≥When the F6 key is pressed while it is blinking, the CH-MIX sound is output. To adjust the ratio...