Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

– 21–
HOME SET UP menu
∑Programmed play function
(1) Press the F4 (PRG PLY) key.
(2) Set the step to FINE or COARSE using the F3 (PRG PLY) key.
(3) Set the programmed play speed using the ADJUST control.
(4) Press the PLAY and VAR buttons together.
(5) To change the playback speed, turn the ADJUST control while pressing the VAR button.
(6) To stop programmed play, press the STOP button.
2.0% PRG PLY 

– 22–
VIDEO IN menu
This menu is displayed by pressing the following key:VIDEO IN
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 23–
VIDEO IN menu
Key
F1
F2
F3–F6
F7
F8–F11
F12
F13
Key designation
INPUT
For selecting the HD video
input signals.
INT SG
For selecting the type of
HD internal signals.
——
SG REF
For synchronizing the
INT SG
——
INT SG 
For selecting the type of
SD internal signals.
INPUT
For selecting the SD video
input signals.
Description
DIGITAL
:Selects the serial input signals.
INT SG:Selects the internal signals.
75% CB:Selects the 75% color bar signal. 
100% CB
:Selects the 100% color bar signal. 
RAMP:Selects...

– 24–
VIDEO OUT HD menu
This menu is displayed by pressing the following key:VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 25–
VIDEO OUT HD menu
Key
F1
F2
F3
F4
F5–F7
F8
F9
F10
F11–F13
Key designation
For adjusting the Y level.
PB
For adjusting the P
Blevel.
PR
For adjusting the P
Rlevel.
BLACK.L
For adjusting the black
level. 
——
SET UP
SD
CONVERT
——
Description
j¶to i3 dB (j3 dB to i3 dB in fine adjustment mode)
≥Establishes the fine adjustment mode if the key is pressed
together with the F key.
j¶to i3 dB (j3 dB to i3 dB in fine adjustment mode)
≥Establishes the fine adjustment mode if the key is pressed
together with...

– 26 –
VIDEO OUT HD SET UP menu
This menu is displayed by pressing the following keys:>F8VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 27–
VIDEO OUT HD SET UP menu
Key
F1
F2–5
F6
F7
F8
F9–F11
F12
F13
Key designation
LINE CONV°
——
SERIAL SYS PHASE
INTERP.
Interpolation
EXIT
——
STATE
——
Description 
Line conversion function
OFF
:No line conversion; when a 1035 tape is played back,
1080 signals with black bands added at the top and
bottom of the picture are output.
ON:Conversion from 1035 to 1080 lines.
Assumes white-on-black display (VAR mode) when the F key
and F6 key are pressed simultaneously, and can be adjusted
with the ADJUST...

– 28–
VIDEO OUT HD SET UP STATE menu
This menu is displayed by pressing the following keys: (or  )>>
OR
>>(or )>
F12F12F11F9VIDEO OUT
F12F8AUDIO OUTVIDEO OUT
Description
NORMAL:The standard mode is established (E-E through
mode is turned OFF).
THROUGH:When the EE/EE1 is selected, the E-E through
mode (AV minimum delay mode) is established.
°A discrepancy occurs between the video (audio) output and time
code output in the E-E through mode.
Transfers the VTR to the VIDEO OUT HD SET UP menu screen....

– 29–
VIDEO OUT HD SET UP STATE menu
∑Selecting the TAPE/EE output signals
The video, audio and cue signals which are output during the VTR’s operation are switched on
this menu to TAPE or EE signals.
(1) Press the center cursor key to display the cursor.
(2) Move the cursor to the desired position using the cursor keys.
°The cursor will not move to places which cannot be set.
(3) Press the center cursor key to select TAPE or EE.
Refer to the following table for the types of setting options.Center cursor...

– 30–
VIDEO OUT SD menu
This menu is displayed by pressing the following keys:>F9VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1