Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

– 121–
SET UP menu
This menu is displayed by pressing the following key:SET UP
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1
F2
F3
F4
F5
F6
F7
F8–F9
F10
F11
F12
F13
Key designation
HOME
MAN EDIT
AUTO EDIT
SYSTEM
TC/CHR
AUDIO IN
AUDIO OUT
——
INTERFACE
PANEL
USER
ENGINEER°
Description
Transfers the VTR to the HOME SET UP menu screen.
Transfers the VTR to the INSERT/ASSEMBLE MANUAL EDIT
SET UP menu screen.
Transfers the VTR to the INSERT/ASSEMBLE AUTO EDIT SET
UP menu screen.
Transfers the VTR to the...

– 122–
INTERFACE SET UP menu
This menu is displayed by pressing the following keys:)F10SET UP
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 123–
INTERFACE SET UP menu
Key
F1
F2
F3
F4
F5
F6
Key designation
P-2
RS-422A Control mode
setting.
RS-232C
PARA
50P parallel remote
ON/OFF.
AV CONT.
V/A control.
FF/REW MAX SP
FF/REW maximum speed
setting.
DEV. ID
Device type.
Description
When the component connected to the RS-422A REMOTE
connector is to be operated by remote control, one of four modes
can be selected to match the system configuration. The flow of
the signals in each mode is displayed on the menu. (Refer to
“Correlation between modes...

– 124 –
INTERFACE SET UP menu
Key
F7
F8
F9
F10
F11
F12– F13
Key designation
PREREAD°
1
For setting pre-read from
the remote commands.
EXIT
UB PRESET
For setting the UB preset
from remote. 
VAR LIMT°2
V. LEV. CNT
——
Description
The setting can be changed by pressing the F7 key while holding
down the F key.
VIDEO:Video pre-read can be set.
AUDIO:Audio pre-read can be set.
V&A:Both video and audio pre-read can be set.
Returns the VTR to the SET UP menu screen.
Selects the setting destination for the TCG UB...

– 125 –
INTERFACE SET UP menu
∑Table of correlations between modes and connectors
MODE-1 connection diagram
MODE-2 connection diagram
MODE
MODE-1
MODE-1
MODE-2
MODE-3
MODE-3
MODE-4
IN
Controller
Controller
Controller
Disabled
Disabled
Disabled
OUT
Player 1
Player 1
Player 1
Player 1
Player 1
Player 1
IN/OUT
Disabled
Disabled
Disabled
Controller
Controller
Controller
IN
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
OUT
Player 1
Disabled
Disabled
Player 1
Disabled
Disabled
IN/OUT
Disabled
Player 2...

– 126 –
INTERFACE SET UP menu
∑Setting the RS-232C parameters
(1) Press the F2 (RS-232C) key to set it ON.
The parameter display now appears.
BAUD RATE:300, 600, 1200, 2400, 4800, 9600 bps
DATA LENGTH:7 or 8 bits
START BIT:1 bit, fixed
STOP BIT:2 or 1 bit
PARITY:None, odd or even
(2) Press the center cursor key.
The input area now blinks.
(3) Press the cursor keys to select the input area.
The cursor moves on a block by block basis when the F key
and cursor key are pressed together.
BAUD RATE:
(4) Press...

– 127 –
INTERFACE SET UP menu
∑Setting the CH ASSIGN audio channel
The commands from a controller which has only analog audio CH1 and CH2 preset commands can be 
re-read and allotted to the digital audio CH1 to CH4 (or CH1 to CH8 with an 8-channel format) and CUE
channels.
(1) Press the center cursor key to display the cursor.
The input area now blinks.
(2) Move the cursor to the CH ASSIGN block by pressing the F key and cursor key together.
(3) Press the cursor key to move the cursor to the position of...

– 128–
PANEL SET UP menu
This menu is displayed by pressing the following keys:#
F11SET UP
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 129–
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
SOUND KEY
Selection of click sound for
function keys and IN/OUT
keys.
SOUND ALARM
Selection of warning
sound when error occurs.    
JOG MAX SP.
Jog maximum speed.
SHTL L/C/R
Shuttle dial clutch
ON/OFF.
SHTL t8, t4
Selection of shuttle dial a8,
a4 clutch.
SHTL MAX SP.
Shuttle maximum speed.
A.SCALE
Audio level meter scale
setting.
EXIT
TC INPUT
Time code input mode
UNITY LD
OP MAP
VAR MAX SP.
Variable maximum speed.
VAR CLUTCH
Variable...

– 130–
PANEL SET UP (OP MAP REMOTE) menu
Press the ##keys to display the OP MAP REMOTE menu.
This menu is used to set and display the buttons, keys, controls, etc. which can be operated on the unit’s front
panel in the remote mode.F11F11SET UP
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1