Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

– 161–
SERVO TEST menu
This menu is displayed by pressing the following keys:#.F7TEST
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 162–
SERVO TEST menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
TORQUE
Reel torque adjustment.
DATA SEND
Torque data forwarding.
MEASURE
(Measure)
AT
AT head adjustment.
METER
PG SHIFT
PG shifter adjustment.
ADJ RATE
Adjust rate.
EXIT
MECHA
Mechanical adjustment.
TRACKING
Tracking adjustment.
X VALUE
BIMORPH INIT
Removal of hysteresis at
AT voltage element.
ADJ ENABLE
Description
Key for adjustment by service personnel.
Key for adjustment by service personnel.
Key for adjustment by...

– 163–
SERVO TEST menu
∑Error rate display
The error rates are displayed in terms of the 1) TOTAL ERROR
and 2) INNER ERROR.
For details, refer to the description of the error rate display for the
RF TEST menu (on page 155).
∑Tracking adjustment
For details of the tracking adjustment, refer to the INSERT/ASSEMBLE MANUAL EDIT SET UP menu (on
page 105). 

– 164–
TEST FRONT menu
This menu is displayed by pressing the following keys:#
F6TEST
Key
F1
F2
F3–F7
F8
F9–F13
Key designation
PANEL
Display check.
KEYCHECK
Front panel key check.
——
EXIT
——
Description
Transfers the VTR to TEST FRONT PANEL menu screen.
Transfers the VTR to the TEST KEY CHECK menu screen.
Returns the VTR to the TEST menu screen.
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 165–
Key
F1
F2–F7
F8
F9–F13
Key designation
MODE
Display dot check.
——
EXIT
——
Description
The entire display panel is lighted up in a fixed pattern and
display dots are checked. Each time the key is pressed, 12 types
of pattern are displayed.
Returns the VTR to the TEST FRONT menu screen.
TEST FRONT PANEL menu
This menu is displayed by pressing the following keys:##.F1F6TEST
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 166–
TEST FRONT KEY CHECK IN menu
This menu is displayed by pressing the following keys:##.F2F6TEST
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1–F7
F8
F9–F13
Key designation
——
EXIT
——
Description
Returns the VTR to the TEST FRONT menu screen. 

– 167–
TEST FRONT KEY CHECK IN menu
∑Dial and controls
When the ADJUST control, headphones control or search dial is
turned, the number of pulses counted is displayed.
∑LEDs
Each time the F1 key is pressed, the LEDs on the panel light up in
sequence and are checked.
∑Keys
When a key (button) on the panel is pressed, the corresponding
key on the menu screen is highlighted, and the buzzer sounds at
the same time. This makes it possible to confirm that the front 
microcomputer has recognized the key.EJECT...

– 168–
Inserting the IC card
The insertion slot for the IC card is located on the back left of the front panel.
Insert the IC card before using the TEST IC CARD menu.
Eject button IC card 

– 169–
TEST IC CARD menu
Preparations
When an error to be logged has occurred, this unit enables information on the date and time of the occurrence
of the error to be recorded in addition to the TC information in the log. Initial registration of the date and time
is required in order for this information to be recorded. Bear in mind that if the unit’s power has been off for
more than one week, it will be necessary to re-register the date and time.
How to register the date and time
When  and then the  key...

– 170–
TEST IC CARD menu
Description
User file management takes place using IC card.
When the F key is pressed, transfer is made to TEST IC CARD
USER FILE menu.
≥There is a load/save function for current (present deck status)
and all registered files.
≥When user file is forwarded to deck, whether SYS_H and
SYS_C should be sent together can be selected.
100 CUE_POINTS (MULTI_CUE) can be loaded/saved to IC
card.
When the F key is pressed, transfer is made to MULTICUE
menu.
≥Whether to send all at once or...