Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

– 111–
INSERT/ASSEMBLE AUTO EDIT menu
(2) Search the edit point using the search dial.
1) Search the edit point using the search dial.
2) Press the ENTRY button.
≥Trimming operations
(1) Press the center cursor key.
The cursor now appears.
(2) Press the cursor key to move the cursor to the section with the data to be trimmed.
(3) Set the F7 (TRIM) key to ON.
(4) Press the center cursor key again so that the cursor is made to serve as a column cursor.
(5) Press the “i” or “j” button to trim the edit point...

– 112 –
INSERT/ASSEMBLE AUTO EDIT menu
Input the data using the scratchpad.
1) Press the center cursor key.
The cursor now appears.
2) Press the cursor key to move the cursor to the time code IN or OUT position which is to be
input.
3) Press the FROM key.
The time code at the cursor position is displayed inside the register.
SPR DATA
4) Use the “i”, “j” and number keys to increment or decrement the time code, and press the
ENT key.
The operation result is now displayed inside the register.
5) Press the...

– 113–
INSERT/ASSEMBLE AUTO EDIT menu
∑Variable memory function
1. Set the F3 (W/PLYR) key to OFF.
W/PLYR
2. Set the F4 (VAR MEMO) key to ON.
VAR MEMO
≥If the IN and OUT points have already been entered, they are automatically cleared.
≥If ON is set for the split mode, it is forcibly set to OFF.
≥When the variable memory function is used, AUDIO IN and OUT points cannot be entered.
3. Input the VTR’s edit IN point.
This serves as the variable memory playback start point.
≥There is no need to set the OUT...

– 114–
INSERT/ASSEMBLE AUTO EDIT menu
∑Variable memory editing
By operating the search dial on a VTR connected to the unit’s RS-422A REMOTE OUT connector or REMOTE
IN/OUT connector, the playback speed and direction can be stored in that VTR’s memory, and the memory
data can be reproduced during automatic editing and stored in this unit (recorder).
1. Set the F3 (W/PLYR) key to ON.
W/PLYR
∫To operate the VTR connected to the REMOTE OUT connector by remote control, set 
F5 (PLYR SEL) on the ASSEMBLE/INSERT...

– 115–
INSERT AUTO EDIT CH SELECT menu
This menu is displayed by pressing the following keys:##
F13F12INSERT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 116–
INSERT AUTO EDIT CH SELECT menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
VIDEO 
For selecting the video
channel ON/OFF.
CH-1 
For selecting the audio
CH1 ON/OFF.
CH-2
For selecting the audio
CH2 ON/OFF.
CH-3 
For selecting the audio
CH3 ON/OFF.
CH-4 
For selecting the audio
CH4 ON/OFF.
CUE  
For selecting the cue
channel ON/OFF.
TC 
For selecting the LTC time
code channel ON/OFF.
SET UP 
CH-5
For selecting the audio
CH5 ON/OFF.
CH-6 
For selecting the audio
CH6 ON/OFF.
CH-7...

– 117–
INSERT/ASSEMBLE AUTO EDIT SET UP menu
This menu is displayed by pressing the following keys: (or  ) to change to the AUTO 
EDIT menu, then press the  key 
OR 
)
F2SET UP
F8
INSERTASSEM
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 

– 118–
INSERT/ASSEMBLE AUTO EDIT SET UP menu
Key
F1
F2
F3
F4
F5
F6
F7
Key designation
TIMING°
1
For setting the edit timing.
V PREV
Video preview.
A PREV
Audio preview.
PLR SYNC
Player synchronization.
PREROLL
For setting the preroll time.
POSTROLL
For setting the postroll time.
REACTION
For compensating the time
with a time lag
Description
Sets the timing at which to record the fields at the edit IN point
and OUT point. This timing can be set by pressing the F1 key
and the F key together.
F1
:Editing...

– 119–
INSERT/ASSEMBLE AUTO EDIT SET UP menu
Key
F8
F9
F10
F11
F12
F13
Key designation
EXIT  
DLY STRT
Delay start.
TRACKING  
For adjusting the tracking.
CAP LOCK 
For setting the capstan
servo lock.
FD TIME°2
For setting the audio fade
time.
MODE°2
For selecting audio fade
editing.
Description
Returns the VTR to the AUTO EDIT menu screen.
Sets the timing after the playback command was issued until the
actual operation in 1-frame increments. (This is used to facilitate
the synchronization with another...

– 120–
INSERT/ASSEMBLE AUTO EDIT SET UP menu
∑Selecting the preroll time
(1) Press the F5 (PREROLL) key.
(2) Set the preroll time using the ADJUST control.
Any time up to 30 seconds can be set.
(3) Press the F5 key.
≥If this setting is at variance from the preroll time set on the HOME SET UP menu, the preroll
time selected last takes precedence.
∑Setting DLY START
(1) Press the F9 (DLY STRT) key.
(2) Set the time using the ADJUST control.
(3) Press the F9 key.
≥This is set when the VTR’s start timing is...