Panasonic Memory Card Camera Recorder Ajhpx2000 Operating Instructions

121Manipulating Clips with Thumbnails : Setting of Clip Meta Data
 Manipulating Clips with Thumbnails
S e l e c t  M E TA  D ATA  > USER CLIP NAME from the
thumbnail menu to select the recording method. Two
options are available: TYPE1 and TYPE2.
* The COUNT value is indicated as a four-digit number.
The COUNT value is incremented each time a new clip
is captured if clip metadata has been read in and TYPE2
has been selected as the recording method.
The COUNT value can be reset using the following...

122Manipulating Clips with Thumbnails : Setting of Proxy (optional) By attaching the video encoder card (AJ-YAX800G,
optional) either to the optional slot or Slot 5, it is possible to
specify the proxy recording setting.
The video encoder card is not recognized when inserted if
the power for the unit is turned ON. Insert the video encoder
card after turning off the power for the unit.
Select OPERATION > DEVICE SETUP > PROXY from
the thumbnail menu to specify the setting.
For the method of installation...

123Manipulating Clips with Thumbnails : Formatting SD memory cards
 Manipulating Clips with Thumbnails
SD memory cards can also be formatted from the
thumbnail screen. With an SD memory card inserted into
the camera-recorder, perform the following operation:
1Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2Press the THUMBNAIL MENU button and  select 
OPERATION 
> FORMAT from the thumbnail menu. 
The following screen appears. Select “SD CARD”.
Select “EXIT” if formatting is...

124Manipulating Clips with Thumbnails : Setting the Thumbnail Display Mode The thumbnail display mode can be customised to suit
your preferences. 
1Press the THUMBNAIL button. 
The thumbnail screen appears on the LCD monitor. 
2Press the THUMBNAIL MENU button and  select 
THUMBNAIL
àSETUP from thethumbnail menu. 
The following screen appears. 
ALL HIDE :
ON
All indicators are not displayed.
OFF
Indication/No indication will be set 
depending on the following menu. The 
factory settings are as...

125Manipulating Clips with Thumbnails : Properties
 Manipulating Clips with Thumbnails
The clip’s properties and the P2 card’s status are displayed.
It is possible to edit and rewrite recorded clip metadata while clip properties are displayed.
From the thumbnail menu, select PROPERTY 
> CLIP
PROPERTY.  The following screen appears. 
1.Clip Number
2.Thumbnail
3.Clip Information 
Indicates the indicators added to the clip and the
number of text and voice memos added to the clip.
The   mark appears if the...

126Manipulating Clips with Thumbnails : Properties
3Press the SET button.
The input window (soft keyboard) for modifying meta-
data is displayed. Use the keyboard to modify the meta-
data.
The keyboard operation is the same as 
[Checking and 
modifying read metadata
] (page 120).
4Press OK on the keyboard to write the modified meta-
data on the clip and return to the metadata window.
The input window (soft keyboard) for modifying meta-
data is displayed. Use the keyboard to modify the meta-
data.
‹Note...

127Manipulating Clips with Thumbnails : Properties
 Manipulating Clips with Thumbnails
From the thumbnail menu, select PROPERTY > CARD STATUS. The following screen appears.
When “REMAIN” is selected:
1.Write-protect Mark
The   mark appears if the P2 card is write-protected. 
2.P2 Card Status (remaining free space)
The remaining memory capacity of the P2 card is
indicated by a bar graph and percentage. The bar
graph indicator moves to the left as the remaining free
space decreases.
The following...

128Manipulating Clips with Thumbnails : Properties The status display enables a confirmation of the SD
memory card formatted condition, available memory
capacity etc.
From the thumbnail menu, select PROPERTY 
>
DEVICES > SD CARD.
If the format is compatible with SD standards, the message
“SD STANDARD: SUPPORTED” is displayed.
If the format is not compatible with SD standards, the
message “SD STANDARD: NOT SUPPORTED” is
displayed. If this is the case, writing or reading will not be
successful. Format the...

129Connection with external device : Connection through the DVCPRO/DV connector
 Connection with external device
1Refer to [32.DVCPRO/DV connector] (page 21) to 
connect the 1394 cable (DV cable).
Ensure that the signal format of the target device 
agrees with that of the camera-recorder.
2Open the  on the SYSTEM 
SETTING page and confirm that the settings in the 
1394 IN CH item and the 1394 OUT CH item are set 
to “AUTO”.
3In case of input from the IEEE1394 interface, set REC 
SIGNAL to “1394”.
The REC...

130Connection with external device : Connection through the DVCPRO/DV connector The DVCPRPO/DV connector can be connected with an
external device for recording backup copies to control the
start and stop of recording.
1When connecting the 1394 (DV) cable, see 
[32.DVCPRO/DV connector] (page 21).
Set the 1394 CONTROL menu option on the 1394 
SETTING screen on the SYSTEM SETTING page to 
BOTH.
2Through the 1394 CMD SEL menu option, select the 
type of stop recording command to be received by the 
external...