Panasonic Memory Card Camera Recorder Ajhpx2000 Operating Instructions

71Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
Information Item Indication Status
1. System mode
1080
720
480
576This indicates the mode that the unit operates in.
1080 interlace mode
720 progressive mode
480 interlace mode
576 interlace mode
2. Camera mode
60i
30P
24P
24PA
50i
25P
60P
50PThis indicates the video system when signals output from CCD are 
recorded on a P2 card or output as video signals.
1080-59.94i or 480-59.94i...

72Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Information Item Indication Status
10. MODE CHECK 
Indication Area
(STATUS:
 Master gain, 
 USER SW GAIN)LOW/MID/HIGH
–3 to 30
S.GAIN 30/36/42/48
DS.GAIN 6
:/10:/12:/
15:/20:
Value set for the master gain
Example: LOW: 0
Gain value to which S.GAIN and DS.GAIN are assigned
(Cause of !LED 
illumination: displayed 
full-screen)
zIndications selected 
through the menu option 
!LED are marked with 
[ ! ].
zIndications which may...

73Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
Information Item Indication Status
11. Camera Warning and 
Report Area 
(related to AWB, ABB 
and switch settings)AWB A ACTIVE
AWB B ACTIVE
AWB A OK 
¢.¢K
AWB B OK 
¢.¢K
AWB BREAK ¢.¢K
AW B  N G
COLOR TEMP LOW
COLOR TEMP HIGH
LEVEL OVER
LOW LIGHT
TIME OVER
AT W  M O D E
AWB PRESET  
¢.¢K
CHECK FILTER
ABB ACTIVE
ABB OK
ABB BREAK
ABB NG
B-SHD READY
B-SHD ACTIVE
B-SHD OK
B-SHD BREAK
B-SHD...

74Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Information Item Indication Status
13. System information 
and warningsSYSTEM ERROR-¢¢
TURN POWER OFF
CARD ERR 
¢
REC WARNING
BACKUP BATT EMPTY
FA N  S TO P
WIRELESS-RF
EOM
BOS
EOS
CANNOT REC
CANNOT PLAY
COMM ERROR
TEXT MEMO
TEXT MEMO INVALID
MARK ON/OFF
SHOT MARK INVALID
UPDATING
USB DEVICE
USB HOST
THUMBNAIL OPEN
1394 INITIAL ERROR
PROXY REC P2&SD
PROXY REC P2
NEAR END (SD)
EOM (SD)
PROXY CARD ERROR
SD CARD WRITE ERR
CANNOT...

75Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
17. Color temperature¢.¢K Color temperature assigned to A, B, and PRST of the WHITE BAL switch 
(this is a value stored at AWB performance or a value set through the menu 
option). The indication is not provided in ATW mode.
18. Filter position1 - 4
–Position of the CC/ND filter.
This indicates that the filter has not been set to a proper position.
19. Dynamic range 
stretcher modeDRS This...

76Adjustments and Settings for Recording : Viewfinder Screen Status Displays
*1 The menu option P2CARD REMAIN can be found in the  screen, which is accessible from the VF 
page.
*2
If the remaining free space or memory capacity is 999 min or more, [999min] is displayed.
P2 Card Remaining Free Space/capacity Indication
Status of 
unitRecording 
statusMenu option
P2 CARD REMAIN*15.P2 card remaining free space 
indication*26.P2 card remaining free space 
indication (during MODE CHECK)
*2
Under normal...

77Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
*1±: Not provided when the menu option STATUS is set to OFF, which can be found in the  screen, accessible from 
the VF page.
z: Provided regardless of the menu option setting.
Indications Available in the Viewfinder Screen 
Selectable 
between on and 
off through menu 
options Provided when 
the appropriate 
status is 
encountered.Provided during 
MODE CHECK*
1SelectableProvided during...

78Adjustments and Settings for Recording : Viewfinder Screen Status Displays
The messages that appear on the viewfinder screen to
indicate changes to settings and adjustment results may
be limited, or set not to appear, through the menu option
DISP MODE. This menu option can be found in the  screen, which is accessible from the VF page. 
For directions on navigating the menu, see [Setting Menu
Options] (page 153).
z: Message appears.±: Message does not appear.
Display Modes and Setting Changes/adjustment...

79Adjustments and Settings for Recording : Viewfinder Screen Status Displays
 Adjustments and Settings for Recording
The center, safety zone, safety zone area and frame
markers may be set to ON or OFF, along with
specifications of the marker types. To set and select
markers, go to the VF MARKER screen from the VF page
and select the appropriate options.
For directions on navigating the menu, see [Setting Menu
Options] (page 153).‹Note
The indication MKR:A at the upper right of the screen
shows the...

80Adjustments and Settings for Recording : Adjusting and setting the LCD monitor
1Turn on the POWER switch of the unit.
2Slide the OPEN button in the arrow  1 direction to 
open the LCD monitor in the arrow  
2 direction.
3Adjust the angle of the LCD monitor for most 
convenient viewing.
The monitor can turn up to 180 degrees towards the 
lens and up to 90 degrees towards you. 
‹Note
To prevent camera-recorder failure, do not allow 
undue force to be applied to the monitor (when it is 
open).
4The...