Panasonic LCD Projector Pt Vw355 Operating Instructions

[D/W/Z6k 
SERIES]
DZ770 series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series,  
DW730 series, DX800 series, DZ6710 series, DZ6700 series, DW6300 series, D6000 series, 
D5000 series, DZ570 series, DW530 series, DX500 series
[L730 SERIES]L730 series, L720 series, L520 series
[L780 SERIES]L780 series, L750 series
[L735 SERIES]L735 series
[L785 SERIES]L785 series
[F/W SERIES]FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
[LZ370]LZ370...

[OFF]Output the audio.
[ON]Turns off the volume temporarily.
Setting the audio output during standby
1) Press as to select [AUDIO SETTING].
2) Press the  button.
 fThe [AUDIO SETTING] screen is displayed.
3) Press as to select [IN STANDBY MODE].
4) Press qw to switch [IN STANDBY MODE].
 fThe items will switch each time you press the button.
[OFF]Disables audio output in the standby mode.
[ON]
Enables audio output in the standby mode when [STANDBY MODE] is set to [NORMAL]. At this 
time, press the  button...

6) Press qw to adjust the level.
OperationAdjustmentRange
Press the w button.Turns up the MIC mixing gain.0 ~ 63Press the q button.Turns down the MIC mixing gain.
Note
 fWhen [OFF] is selected in MIC function, the MIC GAIN function is not available. fIf the MIC function is set to [ON] when connecting audio signals to the  terminal, loud sound may be output suddenly depending on the setting value of [MIC GAIN].  fWhen [MIC] is set to [ON], no signal is input, AV MUTE function is on, FREEZE function is on...

1) Press as to select [FILTER COUNTER].
2) Press the  button.
 fThe [FILTER COUNTER] screen is displayed.
[FILTER 
COUNTER]Displays the using time of the filter.
[TIMER]Sets the timer when you want to display an alert message of filter replacement.
[FILTER COUNTER 
RESET]Resets the filter counter.
Setting [TIMER] 
1) Press as to select [TIMER].
2) Press qw to switch the setting of the timer.
 fThe items will switch each time you press the button.  
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] →...

[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.Refer to "Navigating through the menu" (x page 56) for the operation of the menu screen.
 f When the projector is used for the first time Initial password:  
Press awsqawsq in order, and press the  button.
 fAfter selecting the item, press asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a password is required. Enter the preset password and...

[TEXT DISPLAY]
Overlap the security message (text) over the projecting image.
1) Press as to select [TEXT DISPLAY].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]Disables the text display.
[ON]Enables the text display.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [ON] in [TEXT DISPLAY].
1) Press as to select [TEXT CHANGE].
2) Press the  button.
 fThe [TEXT CHANGE] screen is displayed.
3) Press asqw to select the text,...

[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the  button.
 fThe [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select one item between [CONTROL PANEL] and [REMOTE CONTROLLER].
[CONTROL PANEL]You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER]You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE]...

[NETWORK/USB] menu
On the menu screen, select [NETWORK/USB] from the main menu, and select \
an item from the sub-menu.Refer to "Navigating through the menu" (x page 56) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
Confirmation of the network information
When connecting the “Wireless Manager ME6.3”, the dedicated application of iPad/iPhone/iPod touch/Android, or the Intel® 
WiDi / Intel® Pro WiDi / Miracast compatible device to a projector, the information...

[WIRELESS LAN]
Set the connections of wireless LAN. 
1) Press as to select [WIRELESS LAN].
2) Press qw to select the connection method.
[DISABLE]When do not use the wireless LAN function.
[SIMPLE]
Direct connection mode that can be compatible with all OS (Windows / Mac / iOS / 
Android etc.).
Use the wireless LAN function via the application software which support\
s 
"Wireless Manager ME6.3", iPad / iPhone / iPod touch and Android devices.
Switch the input to [Panasonic APPLICATION], the idle...

1) Press the  button when [NORMAL] is selected.
 fThe [NORMAL] screen is displayed.
2) Press qw to select [M-DIRECT], and press the  button.
 fThe [WIRELESS DETAILED SETUP] screen is displayed.
3) Press as to select an item, and press qw to change the setting according to the instructions.
[IP ADDRESS]Enter the IP address.
[SUBNET MASK]Enter the subnet mask.
[SSID] Select M-DIRECT in Wireless LAN, then the SSID can be set.
[CHANNEL]Select M-DIRECT in Wireless LAN, then the Channel can be set. 
1~11...