Panasonic LCD Projector Pt Vw355 Operating Instructions

5) Press as to select the item and press asqw to change the setting according to the instructions.
[SSID] Enter the same character string that is registered in the access point.
[AUTHENTICATION]Set the user authentication method used by the network to be connected.
[OPEN]Select when the access point authentication method is Open System.
[SHARED]Select when the access point authentication method is Shared Key.
[WPA-PSK ]Select when the access point authentication method is WPA-PSK.
[WPA2-PSK ]Select when...

 rDefault setting of [USER1], [USER2], [USER3]
 fThe following settings are set before the projector leaves the factory.
[SSID]Panasonic Projector
[DHCP]OFF
[IP ADDRESS]192.168.11.100
[SUBNET MASK]255.255.255.0
[DEFAULT GATEWAY]192.168.11.1
[AUTHENTICATION]OPEN
[ENCRYPTION]NONE
[DNS1]/[DNS2]NONE
[CONNECTION LOCK]
You can switch the input signal between Panasonic APPLICATION, MIRRORING and MEMORY VIEWER, or choose one fixed 
input signal from three of them.
1) Press as to select [CONNECTION LOCK].
2)...

[PASSWORD CHANGE]
1) Press as to select [PASSWORD CHANGE].
2) Press the  button.
 fThe [PASSWORD CHANGE] screen is displayed.
3) Press asqw to set the password.
4) Press as to select [OK], and press the  button.
Note
 fYou can enter 8 characters at most.
 fChange the password periodically that is hard to guess.
[NETWORK CONTROL]
Set when you want to control the projector from a computer connected to the network.
1) Press as to select [NETWORK CONTROL].
2) Press qw to switch the item.
 fThe items will...

Note
 fIf you use the “Wireless Manager ME6.3” and the “Multi Projector Monitoring & Control Software” on the same computer at 
the same time, the function of delivering image to all may not be availa\
ble. If you want to use them at the same time, please 
use another computer with respective software.
[MULTI-LIVE]
Switch to the Multi-live mode when using the “Wireless Manager ME6.3”. For details, refer to "Wireless Manager ME6.3" 
operating instructions. You can also use the application that is...

 fIf you change the settings in the [INTERVAL] or [EFFECT] during playback of a MEMORY VIEWER, it does not affect the 
projected image during playback. Please re-play it back to the MEMORY VIEW screen in the [THUMBNAIL] display method 
or [LIST] display method. For information on how to use MEMORY VIEW function, refer to “Memory Viewer Function”.  
(x page 116) 
 fWhen the [GUIDE] is set to [ON], the operation guide and timer bar will automatically disappear after about 3 seconds. 
 fPress asqw or the...

[MAC ADDRESS]Displays the MAC address of wired LAN.
[WIRELESS LAN]Displays the network information of the wireless LAN that set on the pro\
jector.
[ANTENNA LEVEL]Displays the radio wave state of the wireless LAN.
[NETWORK]Displays the connection method of the wireless LAN.
[SSID]Displays the character string of SSID.
[AUTHENTICATION]Displays the user authentication method.
[EAP]Displays the type of EAP.
[ENCRYPTION]Displays the encryption method.
[DEFAULT KEY]Displays the number of the default key....

Connecting with Wired LAN
Example of a normal network connection
 
ComputerProjector
LAN cable (straight) LAN cable (straight)
Hub
Attention
 fWhen a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
 fA LAN cable is required to use the wired LAN function.
 fUse shielded LAN cable (STP cable) that is compatible with category 5 or above.
 fUse a LAN cable with length of 100 m or shorter.
Projector settings
1) Use the LAN cable (Straight) to connect the...

Connecting with Wireless LAN
Example of connection
IEEE802.11a/b/g/n
Example of connection for image transfer
MIRRORINGImage transfer application software
Connection image
 
Intel® WiDi / Intel® Pro WiDi / Miracast 
compatible device
(Example) Copyright protection content display
Projector
 
(Example) Multi-screen display
iPad/iPhone/iPod touch, Android mobile terminal and computer  which are installed with the image transfer application software Projector
InputMIRRORINGPanasonic APPLICATION...

Note
 fWireless LAN and wired LAN cannot be used in the same segment. fWhen multiple devices are connected, a unique IP ADDRESS must be allocated to each device. fSSID has to be entered in alphanumeric letters. fYou cannot set “any” or “ANY” for SSID. fThe projector settings are not required when MIRRORING is connected. For details about MIRRORING, please refer to 
"About MIRRORING" (x page 123). fThe following settings are set before the projector leaves the factory.
[SIMPLE] 
[KEY]proj + The...

4) Click [OK].
 f[Projector status] page is displayed.
Note
 fIf you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in [NETWORK/USB] (x page 93). 
 fDo not perform setting or control simultaneously by starting up multiple\
 web browsers. Do not set or control the projector 
from multiple computers.
 fChange the password first. (x page 111)
 fAccess will be locked for few minutes when an incorrect password is ente\
red three times consecutively.
 fSome items on the projector...