Panasonic LCD Projector Pt Vw355 Operating Instructions

4) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]Hides the warning message.
[ON]Displays the warning message.
[HDMI SIGNAL LEVEL]
Switch the setting when the external equipment is connected to the  terminal of the projector and the image is not 
projected correctly.
1) Press as to select [HDMI SIGNAL LEVEL].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO]Sets the signal level automatically.
[64-940]Select when the...

[CC3]Displays CC3 data.
[CC4]Displays CC4 data.
Note
 fClosed caption is a function that displays text information of video signals mainly used in North America. Captions may not 
be displayed depending on the connected devices or contents being played\
 back.
 f[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YCBCR signal is input.
 fIf [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices 
or the used content of the closed...

[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the  
button on the remote control on each occasion if you input unregistered \
signals frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[AUTO]Enables the auto setup function when switching signals.
[BUTTON]Enables the auto setup function...

 fThe items will switch each time you press the button.
[SXGA]Normal setting.
[SXGA +]Set this when the edge of the image is cropped.
[P-TIMER]
Set and operate the presentation timer function.
1) Press as to select [P-TIMER].
2) Press the  button.
 fThe [P-TIMER] screen is displayed.
[MODE]Switches the elapsed time between [COUNT UP] and [COUNT DOWN].
[TIMER]Sets the finish time of timer when [COUNT DOWN] is selected.
[START] / [STOP] /
[RESTART]Operates the timer.
[RESET]Resets the count....

2) Press the  button.
 fThe [P-TIMER] screen is displayed.
3) Press as to select [EXIT].
4) Press the  button.
[P IN P]
(Only for PT-VW355N)
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
1) Press as to select [P IN P].
2) Press the  button.
 fThe [P IN P] screen is displayed.
[MODE]
1) Press as to select [MODE].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF]P IN P function is disabled.
[SIDE BY SIDE]Sub screen...

[FREEZE]
The projected image is paused temporarily and the sound stopped regardle\
ss of the playback of 
the external equipment. To release this function, press the  button or the  
button on the remote control.
[AV MUTE]Turn off audio and image when the projector is not used for a certain period of\
 time. To release 
this function, press the  button or the  button on the remote control.
[DIGITAL ZOOM]For details, refer to "Using the DIGITAL ZOOM function" (x page 52).
4) Press the  button.
76...

[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu.Refer to "Navigating through the menu" (x page 56) for the operation of the menu screen.
 fAfter selecting the item, press asqw to set.
[STATUS]
You can check the using status of the projector.
1) Press as to select [STATUS].
2) Press the  button.
 fThe [STATUS] screen is displayed.
[SIGNAL][NAME]Displays the name of input signal.
[FREQUENCY]Displays the scanning frequency...

[PROJECTOR ID]
The projector has an ID number setting function that can be used when mu\
ltiple projectors are used side by side to enable 
simultaneous control or individual control via a single remote control.
1) Press as to select [PROJECTOR ID].
2) Press the  button.
 fThe [PROJECTOR ID] screen is displayed.
3) Press as to select a projector ID.
 fSelect one from [ALL], and [1] to [6].
[ALL]Select when controlling projectors without specifying an ID number.
[1] - [6]Select when specifying an ID...

[HIGH2]Select when using the projector in the elevation of above 2 000 m (6 562′) and below 2 700 m  
(8 858′).
Note
 fIt is set to [OFF] when using the projector in the elevation of below 1 400 m (4 593′). It is set to [HIGH1] when using the projector in the elevation of above 1 400 m (4 593′) and below 2 000 m (6 562′). It is set to [HIGH2] when using the projector in the elevation of above 2 000 m (6 562′) and below 2 700 m (8 858′). Failure to do so may shorten the life of the internal parts and...

 f[AMBIENT LIGHT DETECTION] will not work correctly when placing some objects on the ambient luminance sensor.
Setting [POWER MANAGEMENT] in step 3)
Set the operation as following if there is no signal input.
1) Press as to select [POWER MANAGEMENT].
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[SHUT DOWN]The countdown timer is displayed after 30 seconds without input signal. \
The projection lamp is turned off and cooled down when reached the set time, then the...