Panasonic LCD Projector Pt Vw355 Operating Instructions

							Thank you for purchasing this Panasonic Product.
 ■ This manual is intended for products manufactured from May 2016 and beyo\
nd.
 ■ Before operating this product, please read the instructions carefully, and save this manual 
for future use.
 ■ Before using your projector, be sure to read “Read this first!” (x pages 2 to 12).
LCD Projector  Commercial Use
Operating Instructions
Functional Manual
TQBJ0854-2
ENGLISH
  Model No.PT-VW355N
   PT-VX425N 
						

							Read this first!
Read this first!
WARNING:THIS APPARATUS MUST BE EARTHED.
WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain 
or moisture.
This device is not intended for use in the direct field of view at visual display workplaces. To avoid 
incommoding reflexions at visual display workplaces this device must not be placed in the direct 
field of view.
The equipment is not intended for used at a video workstation in complia\
nce BildscharbV.
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a\
 prolonged period of time.
2.  
To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified 
service personnel.
3.  
Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing 
type mains plug. This plug will only fit an earthing-type mains socket. This is a safety feature. If you are un-
able to insert the plug into the mains socket, contact an electrician. D\
o not defeat the purpose of the earthing 
plug.
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT 
TO RAIN OR MOISTURE.
o
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may 
be of sufficient magnitude to constitute a risk of electric shock to persons.
7
The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the literature accompanying the 
product.
WARNING:TURN THE POWER OFF AND DISCONNECT THE POWER PLUG FROM THE WALL OUTLET 
BEFORE REPLACING THE LAMP UNIT.
CAUTION:To assure continued compliance, follow the attached installation instruct\
ions. This includes using 
the provided power cord and shielded interface cables when connecting to\
 computer or peripheral 
devices. Also, any unauthorized changes or modifications to this equipment could void the user's 
authority to operate this device.
This is a device to project images onto a screen, etc., and is not inten\
ded for use as indoor lighting in a 
domestic environment.
Directive 2009/125/EC
2 - ENGLISH  
						

							Read this first!
Importer's name and address within the European Union 
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
CAUTION (North/Middle/South America)
CAUTION:This equipment is equipped with a three-pin grounding-type power 
plug. Do not remove the grounding pin on the power plug. This plug 
will only fit a grounding-type power outlet. This is a safety feature. If 
you are unable to insert the plug into the outlet, contact an electricia\
n. 
Do not defeat the purpose of the grounding plug.Do not remove
FCC NOTICE (USA)
Declaration of Conformity
Model Number:  PT-VW355N, PT-VX425N
Trade Name:  Panasonic
Responsible Party:  Panasonic Corporation of North America
Address:             Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact:  http://www.panasonic.com/support
Projector Contact:  http://panasonic.net/avc/projector/
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interferenc\
e that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized 
modifications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction\
s, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television\
 reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
ne of the 
following measures:
 fReorient or relocate the receiving antenna.
 fIncrease the separation between the equipment and receiver.
 fConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 fConsult the dealer or an experienced radio/BD technician for help.
Any changes or modifications not expressly approved by Panasonic Corp. of North  America could void the 
user’s authority to operate this device.
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions. This includes 
using the provided power cord and shielded interface cables when connect\
ing to computer or peripheral 
devices. Also, any unauthorized changes or modifications to this equipment could void the user’s authority to 
operate this device.
ENGLISH - 3  
						

							Read this first!
FCC NOTICE (USA AND CANADA)
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation of this device\
.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment has been approved for mobile operation and requires minim\
um 20 cm spacing be provided 
between antennas and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes 
of operation. 
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the 
potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated 
as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause 
interference with and/or damage this product.
The available scientific evidence does not show that any health problems are associated with using low power 
wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless 
devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does 
not produce heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological ef fects. Some studies have suggested 
that some biological effects might occur, but such findings have not been confirmed by additional research.
Wireless LAN adaptor has been tested and found to comply with FCC/IC radiation exposure limits set forth for 
an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to 
OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
WARNING:
 •Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data 
Processing Equipment, ANSI/NFPA 75.
 •For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the 
building installation wiring.
 •For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily 
accessible.
Federal Communication Commission (FCC) / IC Radiation Exposure Stateme\
nt
This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-
1999/IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified 
in OET Bulletin 65 Supplement C/IEEE 1528. This equipment should be installed and operated with minimum 
distance 0.5 cm between the radiator & your body.
4 - ENGLISH  
						

							Read this first!
CAUTION (North America)
Be aware of the following limits before using the Wireless LAN Module.
 •To use the Wireless LAN Module, an access point needs to be obtained.
 •Do not use the Wireless LAN Module to connect to any wireless network (SSID*) for which you do not have 
usage rights. Such networks may be listed as a result of searches. Howev\
er, using them may be regarded 
as illegal access. 
*SSID is a name for identifying a particular wireless network for transmission.
 •Do not subject the Wireless LAN Module to high temperatures, direct sunlight or moisture.
 •Do not bend, or subject the Wireless LAN Module to strong impacts.
 •Do not disassemble or alter the Wireless LAN Module in any way.
 •Do not attempt to install the Wireless LAN Module in any incompatible device.
 •Do not remove the Wireless LAN Module from the host product during operations.
 •Data transmitted and received over radio waves may be intercepted and mo\
nitored.
 •To avoid malfunctions caused by radio wave interface, keep the host produ\
ct away from the devices such as 
other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using 
the Wireless LAN Module.
 •When noises occur due to the static electricity, etc., the projector might stop operating for the protection of 
the devices. In this case, turn the projector Off and disconnect the power plug from the wall outlet, then turn 
it on again.
 •Depending on the area, this Wireless LAN Module may not be available.
NOTIFICATION (Canada)
This class B digital apparatus complies with Canadian ICES-003.
Contains mercury / Contenu avec mercure
For more information on safe handling  
procedures, the measures to be taken in  
case of accidental breakage and safe  
disposal options visit: 
ec.gc.ca/mercure-mercury/.
Dispose of or recycle in accordance with  
applicable laws.
Pour plus de renseignements sur les  
procédures de manutention sécuritaire, les  
mesures à prendre en cas de bris accidentel et  
les options d’élimination sécuritaire visitez:
ec.gc.ca/mercure-mercury/.
Mettez au rebut ou recyclez conformément  
aux lois applicables.
Product Identification Marking is located on the bottom of the Wireless LAN Adaptor.
Notice (USA only):
 •This product has a High Intensity Discharge (HID) lamp that contains mercury . Disposal may be regulated 
in your community due to environmental considerations. For disposal or recycling information, please visit 
Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.
Notice (Singapore only):
 •Complies with IDA Standards ID : DB102345
Notice (UAE only):
 •This equipment has been registered with the Telecommunications Regulatory Authority for use in the UAE.
TRA  
REGISTERED No: ER0119239/13 
DEALER No: DA0081667/12
ENGLISH - 5  
						

							Read this first!
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in 
this plug. Should the fuse need to be replaced, please ensure that the r\
eplacement fuse has a rating of 13 amps and that it 
is approved by ASTA or BSI to BS1362.
Check for the ASTA mark  or the BSI mark  on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse 
cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an 
Authorised Service Center.
If the fitted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and the plug cut 
off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the followi\
ng code:
Green - and - Yellow:  Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not c\
orrespond with the coloured markings 
identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the 
plug which is marked with the letter E or by the Earth symbol  or coloured GREEN or GREEN - 
AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the\
 plug which is marked 
with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked 
with the letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
13A250VBS1363/A
HE-8 N
ASAL
6 - ENGLISH  
						

							Read this first!
Brazil Only
Brasil Apenas
 „Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e /ou baterias deverão 
ser entregues ao estabelecimento comercial 
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper a blindagem e produzir fogo. (Fig. 1)
Fig. 1
Como isolar os terminais 
Não  desmonte,  não  remova  o  invólucro,  nem  amasse  a  bateria.  O  gás  liberado  pela  bateria  pode  irritar  a garganta,  danificar  o  lacre  do  invólucro  ou  o  vazamento  provocar  calor,  ruptura  da  blindagem  e  produzir  fogo devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem ficar expostas a temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danificar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais provocado internamente.Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante água. Caso haja irritação, consulte um médico.
 „Remoção das baterias
1.  Pressione a guia e levante a tampa.2.  Remova as baterias.
(ii)(i)(ii)(i)
Fita Isolante
Fita Isolante
To remove the battery
1. Press the guide and lift the cover.2. Remove the batteries.
(ii)(i)(ii)(i)
ENGLISH - 7  
						

							Read this first!
WARNING:
 „POWER
The wall outlet shall be installed near the equipment and shall be easil\
y accessible when problems oc-
cur. If the following problems occur, disconnect the power plug from the wall outlet immediately.
Continued use of the projector in these conditions will result in fire or electric shock.
 zIf foreign objects or water get inside the projector, disconnect the power plug from the wall outlet.
 zIf the projector is dropped or the cabinet is broken, disconnect the pow\
er plug from the wall outlet.
 zIf you notice smoke, strange smells or noise coming from the projector, disconnect the power plug from the 
wall outlet.
 zYou have to disconnect the power plug from the wall outlet to cut off the power supply.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or fire will result.
 zDo not damage the power cord, make any modifications to it, place it near any hot objects, bend it 
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Completely insert the power plug into the wall outlet and the power conn\
ector into the projector 
terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
 zDo not use plugs which are damaged or wall outlets which are coming loos\
e from the wall.
Do not use anything other than the provided power cord.
Failure to observe this will result in fire or electric shocks. Please note that if you do not use the provided power 
cord to ground the device on the side of the outlet, this may result in \
electric shocks.
Clean the power plug regularly to prevent it from becoming covered in du\
st.
Failure to observe this will cause a fire.
 zIf dust builds up on the power plug, the resulting humidity can damage t\
he insulation.
 zIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.
Pull the power plug out from the wall outlet and wipe it with a dry clot\
h regularly.
Do not handle the power plug and power connector with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and fire will result.
 „ON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge m\
ats.
Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector.
Do not set up the projector in humid or dusty places or in places where \
the projector may come into 
contact with oily smoke or steam, ex. a bathroom.
Using the projector under such conditions will result in fire, electric shocks or components deterioration. Com-
ponents deterioration (such as ceiling mount brackets) may cause the projector which is mounted on the ceiling 
to fall down.
Do not install this projector in a place which is not strong enough to t\
ake the full weight of the projec-
tor or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage 
could result.
Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.
If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.
 zBe sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the 
projector from falling down. (Install in a different location to the ceiling mount bracket.)
Do not cover the air intake/exhaust ports.
Doing so will cause the projector to overheat, which can cause fire or damage to the projector .
 zDo not place the projector in narrow, badly ventilated places.
 zDo not place the projector on cloth or papers, as these materials could \
be drawn into the air intake port.
 zProvide at least 1 m (40") of space between any walls or objects and the exhaust port, and at least 50 cm 
(20") of space between any walls or objects and the intake port.
8 - ENGLISH  
						

							Read this first!
WARNING:
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
 zHeated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot 
withstand heat close to this port.
Do not look at or place your skin into the lights emitted from the lens \
while the projector is being used.
Doing so can cause burns or loss of sight.
 zStrong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light.
 zBe especially careful not to let young children look into the lens. In a\
ddition, turn off the power and discon-
nect the power plug when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause fire or electric shocks.
 zFor any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not allow metal objects, flammable objects, or liquids to enter inside of the projector . Do not allow 
the projector to get wet.
Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the projec-
tor.
 zDo not place containers of liquid or metal objects near the projector.
 zIf liquid enters inside of the projector, consult your dealer.
 zParticular attention must be paid to children.
Use the ceiling mount bracket specified by Panasonic.
Using the ceiling mount bracket other than the specified one will result in falling accidents.
 zAttach the supplied safety cable to the ceiling mount bracket to prevent\
 the projector from falling down.
 „ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.
 zDo not use unspecified batteries.
 zDo not use chargeable batteries.
 zDo not disassemble dry cell batteries.
 zDo not heat the batteries or place them into water or fire.
 zDo not allow the + and - terminals of the batteries to come into contact with metallic objects s\
uch as neck-
laces or hairpins.
 zDo not store or carry batteries together with metallic objects.
 zStore the batteries in a plastic bag and keep them away from metallic ob\
jects.
 zMake sure the polarities (+ and -) are correct when inserting the batteries.
 zDo not use a new battery together with an old battery or mix different types of batteries.
 zDo not use batteries with the outer cover peeling away or removed.
Do not allow children to reach the batteries.
Accidentally swallowing them can cause physical harm.
 zIf swallowed, seek medical advice immediately.
If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary .
 zBattery fluid on your skin or clothing could result in skin inflammation or injury.  
Rinse with clean water and seek medical advice immediately.
 zBattery fluid coming in contact with your eyes could result in loss of sight.  
In this case, do not rub your eyes. Rinse with clean water and seek medi\
cal advice immediately.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will 
result.
 zThe lamp can easily explode if struck against hard objects or dropped.
 zBefore replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the wall 
outlet.  
Electric shocks or explosions can result if this is not done.
 zWhen replacing the lamp unit, turn the power off and allow the lamp to cool for at least 1 hour before han-
dling it otherwise it can cause burns.
Do not use the supplied power cord with devices other than this projecto\
r.
 zUsing the supplied power cord with devices other than this projector may\
 cause short circuits or overheat-
ing, and result in electric shock or fire.
Remove the depleted batteries from the remote control promptly.
 zLeaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.
ENGLISH - 9  
						

							Read this first!
CAUTION:
 „POWER
When disconnecting the power cord, be sure to hold the power plug and po\
wer connector.
If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric 
shocks will result.
When not using the projector for an extended period of time, disconnect \
the power plug from the wall 
outlet.
Failure to do so may result in fire or electric shock.
Disconnect the power plug from the wall outlet before carrying out any c\
leaning and replacing the unit.
Failure to do so may result in electric shock.
 „ON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or 
injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
 zBe especially careful not to let young children stand or sit on the proj\
ector.
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in fire.
 zTake particular care in locations exposed to direct sunlight or near stoves.
Do not place the projector where it may be affected by salt or corrosive\
 gas.
Doing so may cause the projector to become faulty due to corrosion. 
Do not place objects in front of the lens while the projector is being u\
sed.Doing so can cause fire or damage to the object and can cause the projector to malfunction.
 zExtremely strong light is emitted from the projector’s lens.
Do not stand in front of the lens while the projector is being used.Doing so can cause damage and burns to clothing.
 zExtremely strong light is emitted from the projector’s lens.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause fire or electric shocks to 
occur.
When mounting the projector on the ceiling, keep mounting screws and pow\
er cord from contact with 
metal parts inside the ceiling.
Contact with metal parts inside the ceiling can cause electric shocks.
Never plug headphones and earphones into  terminal.
Excessive sound pressure from earphones and headphones can cause hearing loss.
 „ACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the 
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which 
contains nearly the same amount of mercury as fluorescent lamp, and the broken pieces will cause injury.
 zIf you believe that you have absorbed the gas or that the gas has got in\
to your eyes or mouth, seek medical 
advice immediately.
 zAsk your dealer about replacing the lamp unit and check the inside of th\
e projector.
When not using the projector for an extended period of time, remove the \
batteries from the remote 
control.
Failure to observe this will cause the batteries to leak, overheat, catch fire or explode, which may result in fire or 
contamination of surrounding area.
 „MAINTENANCE
Ask your dealer about cleaning inside the projector once a year.
Continuous use while dust is accumulated inside the projector may result in fire.
 zFor cleaning fee, ask your dealer.
10 - ENGLISH