Panasonic LCD Projector Pt Vw355 Operating Instructions

Notes on Using Wireless Connection
Wireless connection function of the projector uses radio waves in the 2.4 GHz or in the 2.4 GHz / 5 GHz band.
A radio station license is not required, but be sure to read and fully un\
derstand the following items before use.
 rDo not use near other wireless equipment.
The following equipment may use radio waves in the same band as the proj\
ector.
When the projector is used near these devices, radio wave interference may make communication impossible, or the...

About Wireless LANs
The advantage of a wireless LAN is that information can be exchanged between a PC or other such equipment and an 
access point using radio waves as long as you are within range for radio\
 transmissions.
On the other hand, because the radio waves can travel through obstacles (such as walls) and are available everywhere 
within a given range, problems of the type listed below may occur if security-related settings are not made.
 fA malicious third-part may intentionally intercept and...

Accessories
Make sure the following accessories are provided with your projector. Numbers enclosed < > show the number of accessories.
Wireless remote control unit 
        (N2QAYA000101)      (N2QAYA000100)
PT-VW355N PT-VX425N
                                      
CD-ROM 
(TXFQB02VMC2)
Power cord 
(TXFSX02UXRZ)
AAA/R03 or AAA/LR03 battery 
(for remote control unit)
(TXFSX02UYAZ)String 
(for lens cap)
(6103504711)
(TXFSX02UFEZ)Lens cap 
(TKKL5568)
RGB signal cable 
(K1HY15YY0012)
Attention
 fAfter...

Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follow.
Instruction/list (PDF)
Operating Instructions – Functional Manual
Operating Instructions – Multi Projector Monitoring & Control Software 
Operating Instructions – Logo Transfer Software
Operating Instructions – Wireless Manager ME6.3
List of Compatible Projector Models
This is a list of projectors that are com-
patible with the software contained in the 
CD-ROM and their restrictions.
Software license
The open source...

About your projector
Remote control
  
This jack is not used for these 
projector models.
1
2 3
5 6
7
8 9 4
10 11
12 13
14
15 16
17 18
19
20
21
22 23 2425
27
28
26
29
1 Remote control signal emitters
2 Power on  buttonTurn the projector on.
3  buttonAutomatically adjusts the image display position while projecting the image. In addition, it acts as  button when using the MEMORY VIEWER function.  (x page 49)
4  buttonOpen or close the On-Screen Menu. (x page 56)
5  button/asq(VOL -) w(VOL+)...

Attention
 fDo not drop the remote control.
 fAvoid contact with liquids.
 fDo not attempt to modify or disassemble the remote control.
 fPlease observe the following contents that are described on  the back of the remote control unit (see the right picture). 1. Do not use a new battery together with an old battery. 2. Do not use unspecified batteries. 3. Make sure the polarities (+ and -) are correct when inserting the batteries.
 fIn addition, please read the contents that are related to batteries in...

 rControl panel and Indicators
1
2
3
4
5
678
9
10
1 Power  button
Turns the projector on/off. 
(v standby / b power on)
2 Power indicator  
Displays the status of the power.
3 Lamp indicator 
Displays the status of the lamp.
4 Warning indicator  
Indicates the abnormal conditions of the projector.
5 Ambient Luminance sensor
Detects room’s light and select proper image quality.
6  button
Displays the menu screen. (x page 56)
7  button
Determines and executes an item in the menu screen.
8 asqw buttons...

 rConnecting terminals
123456
7891011121314
1  terminal
This is the terminal to input RGB or YCBCR/YPBPR 
signals.
2  terminal
This is the terminal to input RGB signals.
Or output the RGB or YCBCR/YPBPR signals to external 
monitor.
3  terminal
This is the terminal to input HDMI signals.
4  terminal
This terminal is used to connect the projector to the 
computer with a USB cable when you want to use 
the USB display function of the application software 
“Wireless Manager ME6.3”.
For details, please refer...

Preparing the remote control
Inserting and removing batteries
(ii)(i)
Fig. 1Fig. 2
1) Open the cover. (Fig. 1)
2) Insert batteries and close the cover. (Insert the "m" side first.) (Fig. 2)
 fWhen removing the batteries, perform the steps in reverse order.
When using the system with multiple projectors
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector 
individually by using single remote control, if a unique ID number is as\...

Attaching the Lens Cap
When moving this projector or while not using it over an extended period of time, attach the lens cap.
To prevent loss for the lens cap, please according to the following proce\
dures, attach the lens cap with the string of 
accessories. 
1) Thread the thinner end of the string through the hole on the lens cap.
Lens cap
String
2) Thread the other end of the string through the hole on the bottom of the\
 projector.
 
(ii)
(i)
30 - ENGLISH
Chapter 1   Preparation - Attaching the Lens...