Panasonic LCD Projector PT-L300U PT-L200U Operating Instructions

4041
Advanced Operation
4:3 H-POS(4:3 aspect mode only)
This sets the horizontal positioning
of the projected image when the 4:3
aspect ratio is selected. (Refer to
page 31.)FRONT/REARThis setting should be changed in
accordance with the projector
setting-up method.
Set to “FRONT” when using a
normal reflective screen with the
projector positioned in front of the
screen, and set to “REAR” when
using a translucent screen with the
projector positioned behind the
screen.DESK/CEILINGThis setting should be...

4243
Advanced Operation
Inserting and removing the SD memory card
About the SD menuThe still image data and moving image data that is stored on SD memory
cards can be played back using the SD menu.Displaying the SD menuPress the SD button to change the display to the SD CARD screen.
Inserting the SD
memory cardInsert the SD memory card so that it
is facing the correct way.
#Open the slot cover at the side
of the projector.
$Insert the SD memory card as
shown in the illustration below.
Insert the SD...

4243
Advanced Operation
Inserting and removing the SD memory card
About the SD menuThe still image data and moving image data that is stored on SD memory
cards can be played back using the SD menu.Displaying the SD menuPress the SD button to change the display to the SD CARD screen.
Inserting the SD
memory cardInsert the SD memory card so that it
is facing the correct way.
#Open the slot cover at the side
of the projector.
$Insert the SD memory card as
shown in the illustration below.
Insert the SD...

4445
Advanced Operation
Playing back still imagesThe PICTURE option lets you play back still image data.
Slide playback of still images“SLIDE SHOW” lets you play back still images in a certain order using one of
three available playback methods. Use the 
FandG
buttons to select an
item, and then press the ENTER button. Use the 
IandH
buttons to change
the setting for the selected item. #Use the Fand Gbuttons to
select “PICTURE”, and then
press the ENTER button.
BIf there is no still image data that
can...

4445
Advanced Operation
Playing back still imagesThe PICTURE option lets you play back still image data.
Slide playback of still images“SLIDE SHOW” lets you play back still images in a certain order using one of
three available playback methods. Use the 
FandG
buttons to select an
item, and then press the ENTER button. Use the 
IandH
buttons to change
the setting for the selected item. #Use the Fand Gbuttons to
select “PICTURE”, and then
press the ENTER button.
BIf there is no still image data that
can...

4647
Advanced Operation
SETTING1
MANUAL MODE
NEW
USER SET AUTO MODE
SETTINGUSER SETIf adding settings for a new user, use the
Iand Hbuttons to select “NEW” and
then press the ENTER button. The user
setting edit screen will then be displayed.
If you would like to change the settings
for an existing user, use the Iand H
buttons to select the user setting file (0 -
9) that you would like to change, and
then press the ENTER button.User setting edit screen
(A) Still images set by user (this
row is blank for...

4647
Advanced Operation
SETTING1
MANUAL MODE
NEW
USER SET AUTO MODE
SETTINGUSER SETIf adding settings for a new user, use the
Iand Hbuttons to select “NEW” and
then press the ENTER button. The user
setting edit screen will then be displayed.
If you would like to change the settings
for an existing user, use the Iand H
buttons to select the user setting file (0 -
9) that you would like to change, and
then press the ENTER button.User setting edit screen
(A) Still images set by user (this
row is blank for...

4849
Advanced Operation
SETUPThis describes how to set the playback
interval and angle of rotation for still
images in the user settings.#Use the F, G, Iand H
buttons to select a still image
from the user settings, and
then press the ENTER button.
$Select “SETTING” and then
press the ENTER button.
“INTERVAL
”
Use the Iand Hbuttons to select
the time interval (seconds) between
playback of each still image.“ROTATE
”
Use the Iand Hbuttons to select the
angle of rotation for the still image during
playback....

4849
Advanced Operation
SETUPThis describes how to set the playback
interval and angle of rotation for still
images in the user settings.#Use the F, G, Iand H
buttons to select a still image
from the user settings, and
then press the ENTER button.
$Select “SETTING” and then
press the ENTER button.
“INTERVAL
”
Use the Iand Hbuttons to select
the time interval (seconds) between
playback of each still image.“ROTATE
”
Use the Iand Hbuttons to select the
angle of rotation for the still image during
playback....

5051
Advanced OperationOthers
IndicatorsThere are two indicators on the control panel of the projector which give
information about the operating condition of the projector. These indicators
illuminate or flash to warn you about problems that have occurred inside the
projector, so if you notice that one of the indicators is on, turn off the power
and check the table below for the cause of the problem.ProblemIndicator
display
Flashing (red)
(Lamp unit on)
The surrounding
temperature or the
temperature...