Panasonic LCD Projector PT-L300U PT-L200U Operating Instructions

2021
Preparation
Setting-upProjection methodsThe projector can be set up so that any one of the following four projection
methods can be used. Select whichever projection method matches the
setting-up method. (The projection method can be set from the OPTION
menu. Refer to page 40 for details.)
FRONT/REARFRONT
REAR
(Factory default setting)
NOTE:
BYou will need to purchase the separate ceiling bracket (ET-PKE300) when
using the ceiling installation method.Projector positionThe projection range of this...

2223
PC
POWER
LIGHT
INPUTENTERMENU
FREEZE
NORMALASPECT
USERMEMORYVOLUMEPICTUREMODESDMUTESD TIMEMENUVIDEOCMPNTCOMPONENT
KEYSTONEPC
POWER
LIGHT
INPUTENTERMENU
FREEZE
NORMALASPECT
USERMEMORYVOLUMEPICTUREMODESDMUTESD TIMEMENUVIDEOCMPNTCOMPONENT
KEYSTONE
Basic Operation
Turning off the power#
Press the POWER button. “POWER OFF” is
displayed on the screen.
$
Select “OK” using the Iand H buttons and
press the ENTER button.
The lamp unit will switch off and the picture will stop being projected. (The
power...

2223
PC
POWER
LIGHT
INPUTENTERMENU
FREEZE
NORMALASPECT
USERMEMORYVOLUMEPICTUREMODESDMUTESD TIMEMENUVIDEOCMPNTCOMPONENT
KEYSTONEPC
POWER
LIGHT
INPUTENTERMENU
FREEZE
NORMALASPECT
USERMEMORYVOLUMEPICTUREMODESDMUTESD TIMEMENUVIDEOCMPNTCOMPONENT
KEYSTONE
Basic Operation
Turning off the power#
Press the POWER button. “POWER OFF” is
displayed on the screen.
$
Select “OK” using the Iand H buttons and
press the ENTER button.
The lamp unit will switch off and the picture will stop being projected. (The
power...

2425
Basic Operation
When a YP
BPRsignal is being
input or SD CARD is selected
When a PC/DVI signal is being input
*“GAMMA ADJUST” is not displayed by PT-L200U.
*“W-BAL R”, “W-BAL G” and “W-BAL B” are not displayed when DVI signal
is being input.
       PICTURE
PICTURE MODE  NORMAL
CONTRAST       0
BRIGHT         0
COLOR          0
TINT           0
SHARPNESS      0
COLOR TEMP.     0
GAMMA ADJUST
MEMORY SAVE
MEMORY LOAD
TV-SYSTEM     AUTO1
  
SELECT
  
ADJ     ESC
y      PICTURE
PICTURE MODE  NORMAL...

2425
Basic Operation
When a YP
BPRsignal is being
input or SD CARD is selected
When a PC/DVI signal is being input
*“GAMMA ADJUST” is not displayed by PT-L200U.
*“W-BAL R”, “W-BAL G” and “W-BAL B” are not displayed when DVI signal
is being input.
       PICTURE
PICTURE MODE  NORMAL
CONTRAST       0
BRIGHT         0
COLOR          0
TINT           0
SHARPNESS      0
COLOR TEMP.     0
GAMMA ADJUST
MEMORY SAVE
MEMORY LOAD
TV-SYSTEM     AUTO1
  
SELECT
  
ADJ     ESC
y      PICTURE
PICTURE MODE  NORMAL...

2627
Basic Operation
Returning a setting to
the factory defaultIf you press the NORMAL button on
the remote control unit, you can
return settings to the factory default
settings. However, the operation of
this function varies depending on
which screen is being displayed.
BWhen a menu screen is being
displayed
All items displayed will be returned
to their factory default settings, and
the bar scale will appear white.BWhen an individual adjustment
screen is being displayed
Only the item displayed will be...

2627
Basic Operation
Returning a setting to
the factory defaultIf you press the NORMAL button on
the remote control unit, you can
return settings to the factory default
settings. However, the operation of
this function varies depending on
which screen is being displayed.
BWhen a menu screen is being
displayed
All items displayed will be returned
to their factory default settings, and
the bar scale will appear white.BWhen an individual adjustment
screen is being displayed
Only the item displayed will be...

2829
Basic Operation
NOTE:
BYou can also correct keystone distortion by selecting the KEYSTONE item
in the MAIN MENU and pressing ENTER.
BVertical and horizontal keystone distortion can be corrected to ±30°of the
angle of tilt by PT-L300U. Vertical keystone distortion can be corrected to
±30°of the angle of tilt by PT-L200U. However, the greater the correction
amount, the more the picture quality will deteriorate, and the harder it will
become to achieve a good level of focus. To obtain the best picture...

2829
Basic Operation
NOTE:
BYou can also correct keystone distortion by selecting the KEYSTONE item
in the MAIN MENU and pressing ENTER.
BVertical and horizontal keystone distortion can be corrected to ±30°of the
angle of tilt by PT-L300U. Vertical keystone distortion can be corrected to
±30°of the angle of tilt by PT-L200U. However, the greater the correction
amount, the more the picture quality will deteriorate, and the harder it will
become to achieve a good level of focus. To obtain the best picture...

3031
Basic Operation
Setting the ASPECTThis projector allows you to change the aspect ratio to match the type of
input signal. Pressing the ASPECT button will change the aspect ratio
according to the successive settings shown below.
(You can also change the aspect ratio by selecting the POSITION item in the
MAIN MENU and pressing ENTER.)
*“S4:3” or “S16:9” can be selected when NTSC, M-NTSC, PAL-M, PAL60,
525p and 525i signals are being input to the PT-L300U. 
Illustrations for aspect ratio settings are...