Panasonic LCD Projector PT-FZ570 PT-FW530 PT-FX500 Operating Instructions

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 101
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 57) for the operation of the menu screen.
Note
 
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model 
No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...

Chapter 4 Settings — [NETWORK] menu
102 - ENGLISH
[SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to 
green, yellow, or red depending on that value.
Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter
.
 
f MAX/MIN: Maximum/minimum value of the amount of error. 
 
f Green (-12 dB or lower) 
→ Normal signal quality level.
 
f Yellow (
-11 to -8 dB) 
→ Warning level where there is the possibility of...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 103
2) 
Press the  button.
 
f The 
[PROJECTOR NAME]  screen is displayed.
3)  Select characters with the asqw  buttons and press the  button to enter the projector 
name.   
f Up to eight characters can be input.
 
f Select [ALL DELETE] to delete all the entered characters, or press the  button on the remote 
control to delete a character on the cursor in the entry field. 
 
4) 
Select [OK] with the  as buttons and press the  button. 
 
f To cancel the...

Chapter 4 Settings — [NETWORK] menu
104 - ENGLISH
[Presenter Light]
[LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used.
*1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional  
accessories is inserted.
Note
 
f The settings of network are same for both the  terminal and the  terminal.
 
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless...

ENGLISH - 105
Chapter 5 Operation of Function
This chapter describes the operation methods of some functions.  

Chapter 5 Operation of Function — Network connections
106 - ENGLISH
Network connections
This projector has network function that allows the following by connecting a computer. The wireless module (Model 
No.: ET-WML100) of the optional accessories is required if the wireless LAN is connected.
 
f WEB control
 
By accessing the projector from a computer, you can perform setting, adjustment, status display, etc. of the 
projector. Refer to “Web control function” ( x page 113) for details.
 
f Multi...

Chapter 5 Operation of Function — Network connections
ENGLISH - 107
 
f When a LAN cable is used to transmit and receive Ethernet signal, please connect it to the  terminal or the  
terminal of the projector.
 
f Use a LAN cable that is straight cable or cross cable and compatible with CA
T5 or higher. When you need to know whether to use one or 
both straight/cross cable depending on the configuration of the system, please confirm with your network administrator . For this projector, it 
will identify...

Chapter 5 Operation of Function — Network connections
108 - ENGLISH
Note
 
f Please confirm with your network administrator before you connect to an existing network.
 
f The following settings are set before the projector leaves the factory.
[DHCP]
OFF
[IP ADDRESS] 192.168.10.100
[SUBNET MASK] 255.255.255.0
[DEFAULT GATEWAY] 192.168.10.1
[DNS1]/[DNS2] NONE
Computer setting
1)  Turn on the computer.
2)  Make the network setting according to your system administrator.
 
f If the projector settings are the...

Chapter 5 Operation of Function — Network connections
ENGLISH - 109
Attention
 
f Please do not move or transport the projector while the wireless module \
is attached. Doing so may cause the wireless module to be 
damaged.
 
f The indicator of the wireless module will be off when the projector is in standby mode, it will light in blue when the \
power is turned on and it 
will blink in blue during wireless communicating.
 
Please do not remove the wireless module while the indicator is blinking\
.
 
f...

Chapter 5 Operation of Function — 
About Presenter Light
110 - ENGLISH
About Presenter Light
(The wireless module (Model No.: ET-WML100) of the optional accessories is required if you want to use the 
network function through the wireless LAN.)
By using still image transfer application software “Presenter Light” that supports Windows computers, you can 
transfer images and audio to the projector via the wired LAN/wireless LAN. 
Download the “Presenter Light” to your computer
1) Start up the web browser...