Home
>
Panasonic
>
Projector
>
Panasonic LCD Projector PT-FZ570 PT-FW530 PT-FX500 Operating Instructions
Panasonic LCD Projector PT-FZ570 PT-FW530 PT-FX500 Operating Instructions
Have a look at the manual Panasonic LCD Projector PT-FZ570 PT-FW530 PT-FX500 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
Chapter 4 Settings — [PROJECTOR SETUP] menu
96 - ENGLISH
[COMMAND] Detailed settings of
[COMMAND] Description
[INPUT] [NETWORK]
Switches the input to NETWORK.
[COMPUTER1] Switches the input to COMPUTER1.
[COMPUTER2] Switches the input to COMPUTER2.
[HDMI1] Switches the input to HDMI1.
[HDMI2] Switches the input to HDMI2.
[VIDEO] Switches the input to VIDEO.
[DIGITAL LINK] Switches the input to DIGITAL LINK.
[INPUT1] - [INPUT10]
*1Switches the input to DIGITAL LINK, and switch the input of the
Panasonic...](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-95.png "Page 96
Chapter 4 Settings — [PROJECTOR SETUP] menu
96 - ENGLISH
[COMMAND] Detailed settings of
[COMMAND] Description
[INPUT] [NETWORK]
Switches the input to NETWORK.
[COMPUTER1] Switches the input to COMPUTER1.
[COMPUTER2] Switches the input to COMPUTER2.
[HDMI1] Switches the input to HDMI1.
[HDMI2] Switches the input to HDMI2.
[VIDEO] Switches the input to VIDEO.
[DIGITAL LINK] Switches the input to DIGITAL LINK.
[INPUT1] - [INPUT10]
*1Switches the input to DIGITAL LINK, and switch the input of the
Panasonic...")
![Page 97
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 97
f The setting of the date and time will be completed.
Setting the date and time automatically
1)
Press as to select [DATE AND TIME].
2) Press the button.
f The
[DATE AND TIME] screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the button.
f The
[ADJUST CLOCK] screen is displayed.
5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6) Press as to select [OK], and press the...](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-96.png "Page 97
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 97
f The setting of the date and time will be completed.
Setting the date and time automatically
1)
Press as to select [DATE AND TIME].
2) Press the button.
f The
[DATE AND TIME] screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the button.
f The
[ADJUST CLOCK] screen is displayed.
5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6) Press as to select [OK], and press the...")
![Page 98
Chapter 4 Settings — [SECURITY] menu
98 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.
Refer to “Navigating through the menu” (
x page 57) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press
awsqawsq in order, and press the button.
Attention
f When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-97.png "Page 98
Chapter 4 Settings — [SECURITY] menu
98 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-menu.
Refer to “Navigating through the menu” (
x page 57) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press
awsqawsq in order, and press the button.
Attention
f When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password and...")
![Page 99
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 99
f The items will switch each time you press the button.
[OFF]
Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA
Y SETTING].
1) Press as to select [TEXT CHANGE]....](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-98.png "Page 99
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 99
f The items will switch each time you press the button.
[OFF]
Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA
Y SETTING].
1) Press as to select [TEXT CHANGE]....")
![Page 100
Chapter 4 Settings — [SECURITY] menu
100 - ENGLISH
2)
Press the button.
f The
[CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER] You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE] and [DISABLE].
f You can set the limitation on the control by the control panel or the remote control....](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-99.png "Page 100
Chapter 4 Settings — [SECURITY] menu
100 - ENGLISH
2)
Press the button.
f The
[CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROLLER].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROLLER] You can set the limitation on the control from the remote control.
4) Press qw to switch between [ENABLE] and [DISABLE].
f You can set the limitation on the control by the control panel or the remote control....")
![Page 101
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 101
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 57) for the operation of the menu screen.
Note
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model
No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-100.png "Page 101
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 101
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-menu.
Refer to “Navigating through the menu” (
x page 57) for the operation of the menu screen.
Note
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model
No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by...")
![Page 102
Chapter 4 Settings — [NETWORK] menu
102 - ENGLISH
[SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to
green, yellow, or red depending on that value.
Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter
.
f MAX/MIN: Maximum/minimum value of the amount of error.
f Green (-12 dB or lower)
→ Normal signal quality level.
f Yellow (
-11 to -8 dB)
→ Warning level where there is the possibility of...](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-101.png "Page 102
Chapter 4 Settings — [NETWORK] menu
102 - ENGLISH
[SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to
green, yellow, or red depending on that value.
Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter
.
f MAX/MIN: Maximum/minimum value of the amount of error.
f Green (-12 dB or lower)
→ Normal signal quality level.
f Yellow (
-11 to -8 dB)
→ Warning level where there is the possibility of...")
![Page 103
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 103
2)
Press the button.
f The
[PROJECTOR NAME] screen is displayed.
3) Select characters with the asqw buttons and press the button to enter the projector
name.
f Up to eight characters can be input.
f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote
control to delete a character on the cursor in the entry field.
4)
Select [OK] with the as buttons and press the button.
f To cancel the...](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-102.png "Page 103
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 103
2)
Press the button.
f The
[PROJECTOR NAME] screen is displayed.
3) Select characters with the asqw buttons and press the button to enter the projector
name.
f Up to eight characters can be input.
f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote
control to delete a character on the cursor in the entry field.
4)
Select [OK] with the as buttons and press the button.
f To cancel the...")
![Page 104
Chapter 4 Settings — [NETWORK] menu
104 - ENGLISH
[Presenter Light]
[LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used.
*1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional
accessories is inserted.
Note
f The settings of network are same for both the terminal and the terminal.
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless...](http://img.usermanuals.tech/thumb/58/75789/w64_pt-fz570_en_om_d-103.png "Page 104
Chapter 4 Settings — [NETWORK] menu
104 - ENGLISH
[Presenter Light]
[LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used.
*1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional
accessories is inserted.
Note
f The settings of network are same for both the terminal and the terminal.
f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 101 [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an i\ tem from the sub-menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. Note f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by accessing the projector via a computer. For detailed, please refer to "Web control function" → "[Network config] page" → "Wireless LAN" ( x page 119). [DIGITAL LINK MODE] Switch the communication method of the terminal of the projector. 1) Press as to select [DIGITAL LINK MODE]. 2) Press qw to switch the item. f The items will switch each time you press the button. [AUTO] Switches the communication method automatically to DIGITAL LINK, long reach or Ethernet. [DIGITAL LINK] Fixes the communication method to DIGITAL LINK. [LONG REACH] Fixes the communication method to long reach. [ETHERNET] Fixes the communication method to Ethernet. Possible communication modes l: Communication possible ―: Communication not possible Setting Communication possible Image transmission (100 m (328 '1"))Image transmission (150 m (492 '2")) Ethernet RS-232C [AUTO] For DIGITAL LINK l― ll For long reach ― lll For Ethernet ―― l― [DIGITAL LINK] l― ll [LONG REACH] ― lll [ETHERNET] ―― l― Note f The maximum transmission distance when connected with the long-reach communication method is 150 m (492'2"). However , the signal that the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency:148.5 MHz). f When the communication method of the twist-pair-cable transmitter is set\ to long reach, it will connect with long-reach communication method when [DIGITAL LINK MODE] is set to [AUTO]. To connect with the optional DIGITAL LINK Switcher (Model No.: ET -YFB200G) with the long-reach communication method, set [DIGITAL LINK MODE] to [LONG REACH]. f It will not connect correctly if the twist-pair-cable transmitter is not supporting the long-reach communication method even if [DIGIT AL LINK MODE] is set to [LONG REACH]. [DIGITAL LINK STATUS] Display DIGITAL LINK connection environment. 1) Press as to select [DIGITAL LINK STATUS]. 2) Press the button. f The [DIGITAL LINK STATUS] screen is displayed. [LINK STATUS] Either [NO LINK], [DIGITAL LINK], [LONG REACH] or [ETHERNET] is displayed. [HDCP STATUS] Either [NO SIGNAL], [OFF], or [ON] is displayed.
Chapter 4 Settings — [NETWORK] menu 102 - ENGLISH [SIGNAL QUALITY] [SIGNAL QUALITY] is a numerical value of the amount of error, and the display color changes to green, yellow, or red depending on that value. Check the signal quality level while receiving a signal from the twisted-pair-cable transmitter . f MAX/MIN: Maximum/minimum value of the amount of error. f Green (-12 dB or lower) → Normal signal quality level. f Yellow ( -11 to -8 dB) → Warning level where there is the possibility of noise introduced on the screen. f Red ( -7 dB or higher) → Abnormal level where synchronization may be interrupted or a signal may not be received. [DIGITAL LINK MENU] When the optional DIGITAL LINK output supported device (Model No.: ET -YFB100G, ET-YFB200G) is connected to the terminal, the main menu of DIGITAL LINK output supported device is displayed. Refer to the Operating Instructions of the DIGITAL LINK output supported device for details. Note f When [NETWORK] menu → [NETWORK CONTROL] → [EXTRON XTP] is set to [ON], [DIGIT AL LINK MENU] cannot be selected. [WIRED LAN] You can make detailed wired LAN settings. 1) Press as to select [WIRED LAN]. 2) Press the button. f The [WIRED DETAILED SETUP] screen is displayed. 3) Press as to select an item, and change the setting according to the instructions\ . [DHCP] [ON] If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired. [OFF] If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS], [SUBNET MASK] and [DEFAULT GATEWAY]. [IP ADDRESS] Enter the IP address if DHCP server is not used. [SUBNET MASK] Enter the subnet mask if DHCP server is not used. [DEFAULT GATEWAY] Enter the gateway address if DHCP server is not used. [DNS1] Enter the preferred DNS server address if DHCP server is not used. [DNS2] Enter the alternate DNS server address if DHCP server is not used. 4) Press as to select [OK], and press the button. r Default settings of [WIRED LAN] f The following settings are set before the projector leaves the factory. [DHCP] OFF [IP ADDRESS] 192.168.10.100 [SUBNET MASK] 255.255.255.0 [DEFAULT GATEWAY] 192.168.10.1 [DNS1]/[DNS2] NONE Note f Before using the DHCP server, make sure the DHCP server is already functioning. f Consult your network administrator regarding the IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY. f The settings of network are same for both the terminal and the terminal. [PROJECTOR NAME] Change the name as desired in such a case as the projector needs to be identified on application software. 1) Press as to select [PROJECTOR NAME].
Chapter 4 Settings — [NETWORK] menu ENGLISH - 103 2) Press the button. f The [PROJECTOR NAME] screen is displayed. 3) Select characters with the asqw buttons and press the button to enter the projector name. f Up to eight characters can be input. f Select [ALL DELETE] to delete all the entered characters, or press the button on the remote control to delete a character on the cursor in the entry field. 4) Select [OK] with the as buttons and press the button. f To cancel the change of the name, press asqw to select [CANCEL] and press the button. Note f [Name ØØØØ ] ( ØØØØ is 4-digit number) is set before the projector leaves the factory. [NETWORK CONTROL] Set up the control method of the network. 1) Press as to select [NETWORK CONTROL]. 2) Press the button. f The [NETWORK CONTROL] screen is displayed. 3) Press as to select an item, and press qw to change the setting. [WEB CONTROL]Set to [ON] to control with the web browser. [PJLink CONTROL] Set to [ON] to control with the PJLink protocol. [COMMAND CONTROL] Set to [ON] to control with the terminal control command format ( x page 145). Refer to “Control commands via LAN” ( x page 142). [COMMAND PORT] Set the port number used for command control. [Crestron Connected(TM)] Set to [ON] to control with Crestron Connected TM of Crestron Electronics, Inc. [AMX D.D.] Set to [ON] to control with the controller of AMX Corporation. Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMX Corporation. URL http://www.amx.com/ [EXTRON XTP] Set to [ON] when connecting the “XTP transmitter” of Extron Electronics to the terminal. The [EXTRON XTP] setting must be set to [OFF] when connecting the optional DIGIT AL LINK output supported device (Model No.: ET -YFB100G, ET-YFB200G). For details of the “XTP transmitter”, refer to the website of Extron Electronics. URL http://www.extron.com/ 4) Press as to select [OK], and press the button. f The current network control settings is saved. [NETWROK STATUS] Display the status of the projector network. 1) Press as to select [NETWORK STATUS]. 2) Press the button. f The [NETWORK STATUS] screen is displayed. f The display screen (1/2 [WIRED LAN] → 2/2 [WIRELESS LAN]/[Presenter Light]) will change each time you press as. [WIRED LAN] [DHCP] Displays the usage state of the DHCP server. [IP ADDRESS] Displays the IP address. [SUBNET MASK] Displays the subnet mask. [DEFAULT GATEWAY] Displays the default gateway. [DNS1] Displays the address of the preferred DNS server. [DNS2] Displays the address of the alternate DNS server. [MAC ADDRESS] Displays the MAC address. [WIRELESS LAN] [SSID] *1Displays the character string of SSID. [IP ADDRESS]*1Displays the IP address.
Chapter 4 Settings — [NETWORK] menu 104 - ENGLISH [Presenter Light] [LOGIN PASSWORD]Displays the login password for Presenter Light/VueMagic used. *1 The [SSID]/[IP ADDRESS] of [WIRELESS LAN] will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is inserted. Note f The settings of network are same for both the terminal and the terminal. f The on-screen menu (menu screen) of the projector has not the network setting about the wireless LAN. When the wireless module (Model No.: ET-WML100) of the optional accessories is inserted to the projector, please set the wireless LAN by accessing the projector via a computer. For details, please refer to "Web control function" → "[Network config] page" → "Wireless LAN" ( x page 119). [INITIALIZE] This function is used to return various setting values of [NETWORK] to the factory default value. 1) Press as to select [INITIALIZE]. 2) Press the button. f The [INITIALIZE] screen is displayed. 3) Press qw to select [OK] and then press the button.
ENGLISH - 105 Chapter 5 Operation of Function This chapter describes the operation methods of some functions.
Chapter 5 Operation of Function — Network connections 106 - ENGLISH Network connections This projector has network function that allows the following by connecting a computer. The wireless module (Model No.: ET-WML100) of the optional accessories is required if the wireless LAN is connected. f WEB control By accessing the projector from a computer, you can perform setting, adjustment, status display, etc. of the projector. Refer to “Web control function” ( x page 113) for details. f Multi Monitoring & Control Software This software allows you to monitor and control multiple displays (projector or flat panel display) connected to the LAN. For details, please refer to the operating instructions for "Multi Monitoring & Control Software" included in the supplied CD-ROM. f Early Warning Software The projector supports “Early Warning Software”, which monitors the status of the display (projector or flat panel display) and the peripheral devices inside an intranet, and notifies of abnormality of such equipment and detects signs of possible abnormality. For details, please visit the Panasonic website (http://panasonic.net/avc/projector/ pass/). f Presenter Light By using still image transfer application software “Presenter Light” that supports Windows computers, you can transfer images and audio to the projector via the wired LAN/wireless LAN. For details, please refer to the operating instructions for "Presenter Light" included in the supplied CD-ROM. f VueMagic By using still image transfer application software “VueMagic”, you can transfer images to the projector when iPad/iPhone/iPod touch or Android terminals are connected to this projector through the wireless LAN. Refer to “About VueMagic” ( x page 112) for details. f PJLink By using PJLink protocol, you can send inquiries about the operations or status of the projector from a computer. Refer to “PJLink protocol” ( x page 141) for details. When connecting via wired LAN The projector is equipped with a normal terminal and a terminal that can receive Ethernet signals from a twisted-pair-cable transmitter together with video and audio signals via a LAN cable. f When you do not need to connect a twisted-pair-cable transmitter , connect to the terminal or the terminal. f When you need to connect a twisted-pair-cable transmitter that does not \ support Ethernet signals, connect to the terminal. f When you need to receive Ethernet signals from a twisted-pair-cable transmitter , connect to the terminal. Example of a normal network connection Projector Hub LAN cable (straight) LAN cable (straight) Computer Attention f When a LAN cable is directly connected to the projector, the network connection must be made indoors. Note f A LAN cable is required to use the wired LAN function.
Chapter 5 Operation of Function — Network connections ENGLISH - 107 f When a LAN cable is used to transmit and receive Ethernet signal, please connect it to the terminal or the terminal of the projector. f Use a LAN cable that is straight cable or cross cable and compatible with CA T5 or higher. When you need to know whether to use one or both straight/cross cable depending on the configuration of the system, please confirm with your network administrator . For this projector, it will identify the type of cable (straight/cross) automatically. f Use a LAN cable with length of 100 m (328'1") or shorter. Example of network connections via a twisted-pair-cable transmitter Computer Projector LAN cable (straight) LAN cable (straight) LAN cable (straight) Hub Twisted-pair-cable transmitter (with LAN terminal) Attention f When a LAN cable is directly connected to the projector, the network connection must be made indoors. Note f For the LAN cable between a twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria: g Compatible with CAT5e or higher g Shielded type (including connectors) g Straight-through g Single wire f The maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). It is possible to transmit up to 150 m (492'2") if the twisted-pair-cable transmitter supports the long-reach communication method. However , the signal that the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency:148.5 MHz) when connected with the long-reach communication method. If this distance is exceeded, image may be disrupted or a malfunction may occur in LAN communication. f When laying cables between a twisted-pair-cable transmitter and the projector , check that cable characteristics are compatible with CAT5e or higher using tools such as a cable tester or cable analyzer. When using a relay connector midway, include it in the measurement. f Do not use a hub between a twisted-pair-cable transmitter and the projec\ tor. f Do not pull cables forcefully. Also, do not bend or fold cables unnecessarily. f To reduce the effects of noise as much as possible, stretch out the cables between the t\ wisted-pair-cable transmitter and the projector without any loops. f Lay the cables between a twisted-pair-cable transmitter and the projector away from other cables, particularly power cables. f When installing multiple cables, run them side by side along the shortes\ t distance possible without bundling them together. f After laying the cables, confirm that the value of [SIGNAL QUALITY] in the [NETWORK] menu → [DIGITAL LINK STATUS] is displayed in green (indicates normal quality). ( x page 101) f For twisted-pair-cable transmitter of other manufacturers of which the operation has been verified with the DIGIT AL LINK compatible projector, refer to Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respe\ ctive manufacturers. Projector settings 1) Use the LAN cable (Straight) to connect the projector with computer. 2) Turn on the projector. 3) Press the button to display the [NETWORK] menu, and then select [WIRED LAN], and press the button. 4) Set the detailed setup of [WIRED LAN]. f For details, refer to “WIRED LAN” ( x page 102).
Chapter 5 Operation of Function — Network connections 108 - ENGLISH Note f Please confirm with your network administrator before you connect to an existing network. f The following settings are set before the projector leaves the factory. [DHCP] OFF [IP ADDRESS] 192.168.10.100 [SUBNET MASK] 255.255.255.0 [DEFAULT GATEWAY] 192.168.10.1 [DNS1]/[DNS2] NONE Computer setting 1) Turn on the computer. 2) Make the network setting according to your system administrator. f If the projector settings are the default settings, the computer can be \ used with the following network settings. [IP ADDRESS] 192.168.10.101 [SUBNET MASK] 255.255.255.0 [DEFAULT GATEWAY] 192.168.10.1 When connecting via wireless LAN The wireless module (Model No.: ET-WML100) of the optional accessories is required if you want to use the network function through the wireless LAN. f Only one projector can be connected with the wireless LAN. Connection example IEEE802.11b/g/n Wireless module of optional accessories (Model No.: ET-WML100) Preparation and confirmation of the projector 1) Turn on the projector. 2) Insert the wireless module (Model No.: ET-WML100) of optional accessories firmly into the terminal. Wireless module of optional accessories (Model No.: ET-WML100) 3) Press the button to switch to NETWORK input. f The network input idle screen is displayed. The login password (a four-digit number that is automatically generated), PROJECTOR NAME, SSID, IP ADDRESS (WIRELESS) and IP ADDRESS (WIRED) will be displayed in the idle screen. f You can also press the button on the control panel and the input guide is displayed, then press asqw to switch to NETWORK input.
Chapter 5 Operation of Function — Network connections ENGLISH - 109 Attention f Please do not move or transport the projector while the wireless module \ is attached. Doing so may cause the wireless module to be damaged. f The indicator of the wireless module will be off when the projector is in standby mode, it will light in blue when the \ power is turned on and it will blink in blue during wireless communicating. Please do not remove the wireless module while the indicator is blinking\ . f When the power of the projector is turned on and the indicator of the wi\ reless module is not lighting/blinking, please insert the wireless module to the terminal again. f The [IP ADDRESS (WIRELESS)] is displayed after the power is turned on, please connect network to the projector. Note f Wireless LAN and wired LAN cannot be used in the same segment. f The settings of the wireless module are as follows. You can access the projector from the web browser to set the values of [SSID], [CHANNEL] and [ENCRYPTION]. [SSID] NetworkDisplay [CHANNEL] 1 [IP ADDRESS] 172.28.120.1 [SUBNET MASK] 255.255.255.0 [DEFAULT GATEWAY] 0.0.0.0 [ENCRYPTION] Disable Computer setting 1) Turn on the computer. 2) Make the network setting according to your system administrator. f Please make the network settings for the computer and the projector acco\ rding to your system administrator. 3) Connect to the network that has been set in the projector. f If you use a computer, click on the task tray (bottom right of the computer), then select the same name as the [SSID] that has been set in the projector. Note f If you use any wireless LAN connection utility that meets the OS standard, follow the operation instruction of the utility to connect it. LOGIN PASSWORD : 5678 PROJECTOR NAME : Name1234 SSID : Panasonic Projector IP ADDRESS(WIRELESS) : 172.28.120.1 IP ADDRESS(WIRED) : 192.168.1.100 Network input idle screen f LOGIN PASSWORD f PROJECTOR NAME f SSID f IP ADDRESS(WIRELESS) f IP ADDRESS(WIRED)
Chapter 5 Operation of Function — About Presenter Light 110 - ENGLISH About Presenter Light (The wireless module (Model No.: ET-WML100) of the optional accessories is required if you want to use the network function through the wireless LAN.) By using still image transfer application software “Presenter Light” that supports Windows computers, you can transfer images and audio to the projector via the wired LAN/wireless LAN. Download the “Presenter Light” to your computer 1) Start up the web browser on the computer. 2) Enter the IP address set on the projector into the URL entry field of the web browser. 3) Enter the user name and the password. f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower case). 4) Click [OK]. f The [Projector status] page is displayed. 5) Click [Download]. f The download screen of “Presenter Light” is displayed.