Panasonic LCD Projector PT-FZ570 PT-FW530 PT-FX500 Operating Instructions

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 51

Decreases the volume.
 Increases the volume.
Note
 
f This operation can be also performed by using the  button/ button on the control panel.
Using the freeze function
The projected image can be paused and the audio turned off regardless of the playback of the external device.
 button
1) 
Press the  button.
 
f The image freezes and the audio disappears. 
2)  Press the  button again.
 
f Freezing of the image is canceled and the...

Chapter 3 Basic Operations — Operating with the remote control
52 - ENGLISH
 
f If the automatic setup function is used while moving images are being input, the adjustment may not be performed properly even for an RGB 
signal that can use automatic setup. 
Using the SCREEN ADJ button
The 
[SCREEN ADJUSTMENT]  screen can be displayed.
You can correct the distortion of the projected image that occurs when the projector is installed tilted or when the
screen is tilted or curved.
 button
1)  Press the...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 53
 
f The moving screen is displayed when executing the remote control operation, and the 
[DIGITAL ZOOM] 
individual adjustment screen is not displayed.
 
f The 
[DIGITAL ZOOM]  individual adjustment screen is displayed when executing the menu operation. For 
details, refer to [DISPLAY OPTION] → [OTHER FUNCTIONS]. ( x page 85)
2)  Press the following buttons to move the location of the image or adjust \
the magnification.   
 
f...

Chapter 3 Basic Operations — Operating with the remote control
54 - ENGLISH
Using the FUNCTION button
Some operations in the menu can be assigned to the  button on the remote control so that it can be 
used as an easy shortcut button.
 button
1) 
Press the  button.
To assign functions to the  button
1) Press the  button on the control panel or the remote control to di\
splay the menu items (main 
menu, sub menu, or details menu) you want to assign.
 
f Refer to “Navigating through the menu” (
x page 57)...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 55
Note
 
f This can be displayed from the [PROJECTOR SETUP] menu 
→ [STATUS] (
x page 87).
Using the ECO management function
You can display the setting screen relating to ECO management.
 button
1) 
Press the  button.
Note
 
f Refer to the [PROJECTOR SETUP] menu 
→ [ECO MANAGEMENT] (
x page 88) for details.
Setting the ID number of the remote control
When you use the system with multiple projectors, you can operate all th\
e...

56 - ENGLISH
Chapter 4 Settings
This chapter describes the settings and the adjustments you can make usi\
ng the on-screen menu.  

Chapter 4 Settings — Menu navigation
ENGLISH - 57
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector
.
Navigating through the menu
Operating procedure
 button
1) Press the  button on the remote control or the control panel.
 
f The main menu screen appears.
2) 
Press as to select an item from the main menu.
 
f The selected item is highlighted in yellow.
3) 
Press the  button.
 
f The sub-menu items of the selected main menu are displayed.
4)...

Chapter 4 Settings — Menu navigation
58 - ENGLISH
Note
 
f Pressing the  button while the menu screen is displayed to return the previous menu. 
You can operate in the same way by pressing 
the  button.
 
f Some items may not be adjusted or used for certain signal formats to be input to the projector
. The menu items that cannot be adjusted or 
used are shown in gray characters, and they cannot be selected. [DIGIT AL CINEMA REALITY] and [FRAME LOCK] may not be displayed 
depending on the input signal....

Chapter 4 Settings — Menu navigation
ENGLISH - 59
[PICTURE] 
Sub-menu item
Factory default Page
[PICTURE MODE]
[STANDARD]61
[CONTRAST] [0]61
[BRIGHTNESS] [0]61
[COLOR]*
2[0] 62
[TINT]*
2[0] 62
[SHARPNESS] [+8]62
[COLOR TEMPERATURE] [DEFAULT]62
[GAMMA] [0]63
[IRIS] [OFF]*
163
[ADVANCED MENU] -63
[DAYLIGHT VIEW] [AUTO]*
1*364
[DIGITAL CINEMA REALITY]*
2[ON] 64
[NOISE REDUCTION]*
4[1] 64
[TV-SYSTEM]*
4[AUTO] 65
[RGB/YP
BPR]/[RGB/YCBCR]*5[AUTO] 65
*1 Depends on the [PICTURE MODE].
*2  Only for movie-based...

Chapter 4 Settings — Menu navigation
60 - ENGLISH
Sub-menu item
Factory default Page
[AUTO SETUP SETTING] [AUTO]83
[SIGNAL SEARCH] [ON]83
[STARTUP INPUT SELECT] [LAST USED]83
[BACK COLOR] [BLUE]83
[WIDE MODE] [AUTO]84
[SXGA MODE] [AUTO]84
[P-TIMER] -84
[OTHER FUNCTIONS] -85
[PROJECTOR SETUP] 
Sub-menu item Factory default Page
[STATUS] -87
[PROJECTOR ID] [ALL]87
[INITIAL START UP] [LAST MEMORY]87
[PROJECTION METHOD] [AUTO]88
[LAMP POWER] [NORMAL]88
[ECO MANAGEMENT] -88
[RS-232C] -90
[FUNCTION BUTTON]...