Home
>
Panasonic
>
Projector
>
Panasonic LCD Projector PT-FZ570 PT-FW530 PT-FX500 Operating Instructions
Panasonic LCD Projector PT-FZ570 PT-FW530 PT-FX500 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector PT-FZ570 PT-FW530 PT-FX500 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 81
11)
Press qw to select [OK], and press the button.
Note
f The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] below [EDID MODE].
f The resolution and vertical scanning frequency settings may be required on your computer or video device.
f After configuring settings, your computer or video device or the projector may be required to be restarted.
f Output with resolution and vertical scanning frequency that have...](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-80.png "Page 81
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 81
11)
Press qw to select [OK], and press the button.
Note
f The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] below [EDID MODE].
f The resolution and vertical scanning frequency settings may be required on your computer or video device.
f After configuring settings, your computer or video device or the projector may be required to be restarted.
f Output with resolution and vertical scanning frequency that have...")
Chapter 4 Settings — [DISPLAY OPTION] menu ENGLISH - 81 11) Press qw to select [OK], and press the button. Note f The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] below [EDID MODE]. f The resolution and vertical scanning frequency settings may be required on your computer or video device. f After configuring settings, your computer or video device or the projector may be required to be restarted. f Output with resolution and vertical scanning frequency that have...
Page 82
![Page 82
Chapter 4 Settings — [DISPLAY OPTION] menu
82 - ENGLISH
2)
Press the button.
f The
[SCREEN SETTING] screen is displayed.
3) Press as to select [SCREEN FORMAT].
4) Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
r For PT-FZ570
[SCREEN FORMAT]
DescriptionRange when [SCREEN POSITION] is selected
[16:10] The projected aspect ratio is 16:10. The vertical position cannot be adjusted.
[16:9] The projected aspect ratio is 16:9. Adjusts the vertical...](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-81.png "Page 82
Chapter 4 Settings — [DISPLAY OPTION] menu
82 - ENGLISH
2)
Press the button.
f The
[SCREEN SETTING] screen is displayed.
3) Press as to select [SCREEN FORMAT].
4) Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
r For PT-FZ570
[SCREEN FORMAT]
DescriptionRange when [SCREEN POSITION] is selected
[16:10] The projected aspect ratio is 16:10. The vertical position cannot be adjusted.
[16:9] The projected aspect ratio is 16:9. Adjusts the vertical...")
Chapter 4 Settings — [DISPLAY OPTION] menu 82 - ENGLISH 2) Press the button. f The [SCREEN SETTING] screen is displayed. 3) Press as to select [SCREEN FORMAT]. 4) Press qw to switch the [SCREEN FORMAT] item. f The items will switch each time you press the button. r For PT-FZ570 [SCREEN FORMAT] DescriptionRange when [SCREEN POSITION] is selected [16:10] The projected aspect ratio is 16:10. The vertical position cannot be adjusted. [16:9] The projected aspect ratio is 16:9. Adjusts the vertical...
Page 83
![Page 83
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 83
[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
Enables the auto setup function when...](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-82.png "Page 83
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 83
[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
Enables the auto setup function when...")
Chapter 4 Settings — [DISPLAY OPTION] menu ENGLISH - 83 [AUTO SETUP SETTING] Set the automatic execution of AUTO SETUP. The screen display position or signal level can be adjusted automatically without pressing the button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc. 1) Press as to select [AUTO SETUP SETTING]. 2) Press qw to switch the item. f The items will switch each time you press the button. [AUTO] Enables the auto setup function when...
Page 84
![Page 84
Chapter 4 Settings — [DISPLAY OPTION] menu
84 - ENGLISH
f The items will switch each time you press the button.
[BLUE]
Displays the entire projection area in blue.
[BLACK] Displays the entire projection area in black.
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[WIDE MODE]
Using this function when the image is displayed incorrectly for...](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-83.png "Page 84
Chapter 4 Settings — [DISPLAY OPTION] menu
84 - ENGLISH
f The items will switch each time you press the button.
[BLUE]
Displays the entire projection area in blue.
[BLACK] Displays the entire projection area in black.
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[WIDE MODE]
Using this function when the image is displayed incorrectly for...")
Chapter 4 Settings — [DISPLAY OPTION] menu 84 - ENGLISH f The items will switch each time you press the button. [BLUE] Displays the entire projection area in blue. [BLACK] Displays the entire projection area in black. [DEFAULT LOGO] Displays the Panasonic logo. [USER LOGO] Displays the image registered by the user. Note f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. [WIDE MODE] Using this function when the image is displayed incorrectly for...
Page 85
![Page 85
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 85
4)
Press qw to set the time.
f The time can be set in 1-minute increments from 1 to 180 minutes.
f The factory default value is 10 minutes.
Note
f [TIMER] is enabled when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1)
Press as to select [P-TIMER].
2) Press the button.
f The
[P-TIMER] screen is displayed.
3) Press as to select the item, and press the button.
[START] The count is started.
[STOP] The count is stopped....](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-84.png "Page 85
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 85
4)
Press qw to set the time.
f The time can be set in 1-minute increments from 1 to 180 minutes.
f The factory default value is 10 minutes.
Note
f [TIMER] is enabled when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1)
Press as to select [P-TIMER].
2) Press the button.
f The
[P-TIMER] screen is displayed.
3) Press as to select the item, and press the button.
[START] The count is started.
[STOP] The count is stopped....")
Chapter 4 Settings — [DISPLAY OPTION] menu ENGLISH - 85 4) Press qw to set the time. f The time can be set in 1-minute increments from 1 to 180 minutes. f The factory default value is 10 minutes. Note f [TIMER] is enabled when [MODE] is set to [COUNT DOWN]. Using the presentation timer 1) Press as to select [P-TIMER]. 2) Press the button. f The [P-TIMER] screen is displayed. 3) Press as to select the item, and press the button. [START] The count is started. [STOP] The count is stopped....
Page 86
![Page 86
Chapter 4 Settings — [DISPLAY OPTION] menu
86 - ENGLISH
[FREEZE] The projected image is paused temporarily and the sound stopped regardle\
ss of the playback of the
external equipment.
Press the button on the remote control to release this function.
Also press the button or the button on the remote control to release this
function.
[AV MUTE] Turn off audio and image when the projector is not used for a certain period of\
time. To release this
function, press the button on the remote control or...](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-85.png "Page 86
Chapter 4 Settings — [DISPLAY OPTION] menu
86 - ENGLISH
[FREEZE] The projected image is paused temporarily and the sound stopped regardle\
ss of the playback of the
external equipment.
Press the button on the remote control to release this function.
Also press the button or the button on the remote control to release this
function.
[AV MUTE] Turn off audio and image when the projector is not used for a certain period of\
time. To release this
function, press the button on the remote control or...")
Chapter 4 Settings — [DISPLAY OPTION] menu 86 - ENGLISH [FREEZE] The projected image is paused temporarily and the sound stopped regardle\ ss of the playback of the external equipment. Press the button on the remote control to release this function. Also press the button or the button on the remote control to release this function. [AV MUTE] Turn off audio and image when the projector is not used for a certain period of\ time. To release this function, press the button on the remote control or...
Page 87
![Page 87
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 87
[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (
x page 57) for the operation of the menu screen.
[STATUS]
Display the status of the projector.
1)
Press as to select [STATUS].
2) Press the button.
f The
[STATUS] screen is displayed.
[SIGNAL] [NAME]
Displays the name of input signal.
[FREQUENCY] Displays the scanning...](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-86.png "Page 87
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 87
[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (
x page 57) for the operation of the menu screen.
[STATUS]
Display the status of the projector.
1)
Press as to select [STATUS].
2) Press the button.
f The
[STATUS] screen is displayed.
[SIGNAL] [NAME]
Displays the name of input signal.
[FREQUENCY] Displays the scanning...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 87 [PROJECTOR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub- menu. Refer to “Navigating through the menu” ( x page 57) for the operation of the menu screen. [STATUS] Display the status of the projector. 1) Press as to select [STATUS]. 2) Press the button. f The [STATUS] screen is displayed. [SIGNAL] [NAME] Displays the name of input signal. [FREQUENCY] Displays the scanning...
Page 88
![Page 88
Chapter 4 Settings — [PROJECTOR SETUP] menu
88 - ENGLISH
[LAST MEMORY]
Starts in the condition that before disconnected the power cord or turn of f the breaker.
[STANDBY] Starts up in the standby mode.
[ON] Starts the projection immediately.
[PROJECTION METHOD]
Set the projection method in accordance with the installation status of the projector .
Change the projection method if the screen display is upside down or inv\
erted.
1) Press as to select [PROJECTION METHOD].
2) Press qw to switch the...](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-87.png "Page 88
Chapter 4 Settings — [PROJECTOR SETUP] menu
88 - ENGLISH
[LAST MEMORY]
Starts in the condition that before disconnected the power cord or turn of f the breaker.
[STANDBY] Starts up in the standby mode.
[ON] Starts the projection immediately.
[PROJECTION METHOD]
Set the projection method in accordance with the installation status of the projector .
Change the projection method if the screen display is upside down or inv\
erted.
1) Press as to select [PROJECTION METHOD].
2) Press qw to switch the...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 88 - ENGLISH [LAST MEMORY] Starts in the condition that before disconnected the power cord or turn of f the breaker. [STANDBY] Starts up in the standby mode. [ON] Starts the projection immediately. [PROJECTION METHOD] Set the projection method in accordance with the installation status of the projector . Change the projection method if the screen display is upside down or inv\ erted. 1) Press as to select [PROJECTION METHOD]. 2) Press qw to switch the...
Page 89
![Page 89
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 89
5)
Press as to select [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] or [AV MUTE DETECTION].
[AMBIENT LIGHT
DETECTION] Adjusts the power of the lamp according to the brightness of the installation location.
[SIGNAL DETECTION] Lowers the power of the lamp when there is no signal.
[AV MUTE DETECTION] Lowers the power of the lamp when the [AV MUTE] is [ON].
6) Press qw to switch the item.
f The items will switch each time you press the button....](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-88.png "Page 89
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 89
5)
Press as to select [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] or [AV MUTE DETECTION].
[AMBIENT LIGHT
DETECTION] Adjusts the power of the lamp according to the brightness of the installation location.
[SIGNAL DETECTION] Lowers the power of the lamp when there is no signal.
[AV MUTE DETECTION] Lowers the power of the lamp when the [AV MUTE] is [ON].
6) Press qw to switch the item.
f The items will switch each time you press the button....")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 89 5) Press as to select [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] or [AV MUTE DETECTION]. [AMBIENT LIGHT DETECTION] Adjusts the power of the lamp according to the brightness of the installation location. [SIGNAL DETECTION] Lowers the power of the lamp when there is no signal. [AV MUTE DETECTION] Lowers the power of the lamp when the [AV MUTE] is [ON]. 6) Press qw to switch the item. f The items will switch each time you press the button....
Page 90
![Page 90
Chapter 4 Settings — [PROJECTOR SETUP] menu
90 - ENGLISH
[ECO]
Select this item to reduce power consumption during standby.
Note
f If [STANDBY MODE] is set to [ECO], you cannot use network functions when the projector is standing by. Also, you cannot use some RS-
232C protocol commands.
f When set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on, compared with
when [NORMAL] is set.
f When set to [NORMAL], it may take approx. 1...](http://img.usermanuals.tech/thumb/58/75789/w300_pt-fz570_en_om_d-89.png "Page 90
Chapter 4 Settings — [PROJECTOR SETUP] menu
90 - ENGLISH
[ECO]
Select this item to reduce power consumption during standby.
Note
f If [STANDBY MODE] is set to [ECO], you cannot use network functions when the projector is standing by. Also, you cannot use some RS-
232C protocol commands.
f When set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on, compared with
when [NORMAL] is set.
f When set to [NORMAL], it may take approx. 1...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 90 - ENGLISH [ECO] Select this item to reduce power consumption during standby. Note f If [STANDBY MODE] is set to [ECO], you cannot use network functions when the projector is standing by. Also, you cannot use some RS- 232C protocol commands. f When set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on, compared with when [NORMAL] is set. f When set to [NORMAL], it may take approx. 1...