Home
>
Panasonic
>
Car Audio & Video
>
Panasonic Lcd Monitor Dvd Receiver Cq Vd6503u Operating Instructions
Panasonic Lcd Monitor Dvd Receiver Cq Vd6503u Operating Instructions
Have a look at the manual Panasonic Lcd Monitor Dvd Receiver Cq Vd6503u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10 11CQ-VD6503U English Symbols used in this manual Disc Marks The following pictographs are used for the descriptions of disc operation. (apage 19-23) : DVD : VCD (Video CD) : CD : CD-R/RWs containing MP3 files : CD-R/RWs containing WMA files WMAWMAWMA MP3MP3MP3 CDCDCD VCDVCDVCD DVDDVDDVD Pictographs You can perform some operations of this unit in one or more methods with the touch panel or remote control. This book explains such operations in tabular form as fol- lows. Refer to the following for the pictographs located in the upper part of each table. Compatible types of disc The discs compatible with the targeted operation. Compatible CompatibleDiscs DiscsCompatible Discs Compatible Discs Disques compatibles Compatible Discs Compatible Discs Compatible Discs Discos compatibles Compatible Discs Operation on the Touch Panel You can use the touch panel to perform the targeted operation. If the operation is not executable with the touch panel, “––” is displayed. Operation on the Remote Control Unit You can use the remote control to perform the targeted operation. If the operation is not executable with the remote control, “––” is displayed. Operation on the Unit You can use the Unit to perform the targeted operation. If the operation is not executable with the Unit, “––” is dis- played.
11 12CQ-VD6503U English u[s] [d] (TUNE TRACK) Name of Controls and Functions ASPECT MUTE MENUNAVI TUNE FOLDERALBUM TRACK SRC VOL ASP P-MODE PWR TILT CQ-VD6503U Main Unit Disc slotRemote control sensor Security LED ( apage 33)SECURITY LED e[+] [–] (VOL) r[MUTE] q[SRC](PWR) (SOURCE/POWER) w[MENU] Dimmer Sensor ( apage 34)DIMMER y[}] [{] (ALBUM FOLDER) o[u] (TILT) t[ASP] (P•MODE (PRIVATE MODE) ASPECT) i[NAVI] q w[MENU ] e[+] [–] (VOL) r[MUTE ] t yu i o[ u] (TILT ) ¡Adjusts the monitor position. ¡Opens/closes the panel. ¡Ejects the disc. ¡Put navigation screen on the display. (available in the future) [NAVI ] ¡Goes to beginning. ¡Fast forward/fast reverse. ¡Slow playback ([d]).[s] [d] (TUNE TRACK) ¡Selects a folder or a disc. ¡Selects (vertically) or adjusts an operation or item.[}] [{] (ALBUM FOLDER) ¡Selects the aspect ratio. ¡Activates/inactivates the private mode. [ASP] (P•MODE) (ASPECT) ¡Mutes the sound temporarily. ¡Adjusts the sound volume. ¡Shows the menu screen. ¡Switches on/off the power. ¡Changes the modes such as sound and picture. [SRC] (PWR) : This book refers to connections to the Panasonic car navigation system that will come onto the market in the future. Descriptions regarding the car navigation system are boxed with a dotted line. Main Unit (Panel Open) Note: ¡[MENU], [ASP], [NAVI], [u] are available only on the display unit.
12 13CQ-VD6503U English CAR AV MUTE ENT VOL SRC PWR DVD MENU RET RETURN TOP MENU ENTER / BAND r[MUTE ] t[+] [–](VOL) q[SRC](PWR) (SOURCE/POWER) e[RET] (RETURN) u[] (TOP MENU/DVD MENU) w [ ■][ ❚❚][ B] [ s] [ d] Aim the remote control at the remote control sensor of the display unit and operate it. y [ }] [ {] [ ]] [ [] [ENT ] (ENTER/BAND) Remote Control q w [ ■] [ ❚❚] [ B] e rt y u ¡Displays the DVD/title menu. (Operations vary according to the media.) [ ] (TOP MENU/ DVD MENU) ¡Selects a band. ¡Searches for broadcast stations and memorizes them automatically. ¡Determines an operation or item.[ENT] (ENTER/ BAND) ¡Selects (vertically) or adjusts an operation or item.[}] [{] ¡Selects or searches for a track, file, sta- tion. ¡Selects (horizontally) or adjusts an opera- tion or item.[]] [[] ¡Adjusts the sound volume. [+] [–] (VOL) ¡Mutes the sound temporarily. [MUTE ] ¡Returns to the previous display. ¡Inputs the number again. ¡Displays the VCD’s menu. [RET] (RETURN) ¡Goes to beginning. ¡Fast forward/fast reverse. ¡Slow playback ([d]).[ s] [ d] ¡Playback ¡Pause ¡Stops playback. ¡Switches the power on/off. ¡Changes the modes such as sound and picture. [SRC] (PWR) Note: ¡[ENT], [RET], [ ■], [❚❚ ], [ B],[] are available only on the remote control unit.
13 14CQ-VD6503U English Touch Panel Operation Overview The State of Operation Screen ❒Notes on the Touch Panel Before operation ¡Clean the surface of the touch panel. (apage 47) Operation ¡Use only your fingers to operate the touch panel. ¡Do not press the panel forcefully. ¡Do not scratch the panel with fingernails or any hard objects.¡Do not use a pen or other sharp implements to operate the touch panel. ¡Do not bump the front panel. aFailure to observe the above may damage or break the glass on the surface of the touch panel. Prohibition Input is not possible because the user has attempted to perform an operation which is not supported by the disc contents. Displays the Source Selection Screen. Source Button Menu Button Example: DVD mode Displays the Menu Screen. Display Button (anext page) Volume indicatorCurrent modeDisc indicator (Lights when a disc is loaded) Clock time(apage 32) Note : ¡The following picture is partly darkened for explanation. ¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details. (Content varies with each source) Source Selection Screen appears. Touch desired source button. Touch to quit. Note : ¡The screen above appears when no external device is connected to AV1, AV2, and the Expansion Module (CY-EM100U, option). Source Selection ScreenMenu Screen Menu Screen appears. Select desired setting. Menu Setting, (apage 30) Press [SRC]to change to desired mode.Press [MENU]to let Menu Screen appear.
14 15CQ-VD6503U English Radio (apage 26) *1To switch Operation Screen ON, touch the center of touch panel. *2The operation screen is not available in the video mode. DVD mode Showing the hidden part of the screen. Some items have continued parts. You can see the continued parts by pressing or . Note: ¡ Refer to the description of each mode for how to operate the operation screen. Switching the Display Disc Player (DVD/VCD(*1)/ CD/MP3/WMA) (apage 20) Touching allows users to switch between screens as follows. Standard ScreenOperation Screen AV1/AV2 (*1) (apage 28) Source Standard ScreenOSD OFF *2Source Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are connected. ❏How to Call up Operation Screen ❏How to Cancel OSD (On Screen Display)
15 16CQ-VD6503U English Operations General [MUTE] [TILT] [SRC](PWR: power) [+] [–] (VOL) Remote Control Sensor [SRC] – – –[SRC] [SRC] (apage 14)[SRC] General Operations Power ON : Source selection [u] ¡Press once to open. Press again to close.Display Open/Close Note: ¡The face plate automatically closes after a warning alarm sounds if no operation is performed for approximately 20 seconds. ¡When a disc is already loaded, the disc will be ejected. –[SRC][SRC]Power OFF : Preparation:Turn your car’s ignition key to the ACC or ON position. …… Touch/Press and hold for more than 2 seconds RADIO(AM/FM)(apage 26) (apage 20) (apage 28) (aSystem Upgrade Guidebook) AV1/AV2 Sources connected to the Expansion Module (CY-EM100U) *1 DVD(DVD/VCD (Video CD)/CD/MP3/WMA) *1 When the Expansion Module (CY-EM100U, option) is connected. (aSystem Upgrade Guidebook) Note: ¡ If there is no external sources connected, AV1/AV2 mode can be set to skip. (apage 39) Note: ¡You cannot turn on the power via the remote control when is set to . ( a, page 33)ACC SELECTOFF ACC SELECT ASPECT MUTE MENUNAVI TUNE FOLDERALBUM TRACK SRC VOL ASPP-MODE PWR TILT CQ-VD6503U SRC MUTE[MUTE] [s][d]
16 17CQ-VD6503U English CAR AV MUTE ENT VOLSRCPWR DVD MENURETRETURN TOP MENU ENTER / BAND MUTESRCMUTESRCVOL [SRC] (PWR: power) [MUTE] []] [[] [+] [–] (VOL) q Press and hold for more than 2 sec- onds. w Press to adjust. Setup is the same as from MENU. Refer to for details. ( apage 32) DISPLAY UNIT Operations – or []]or [[] – – –[ +] [ –][ +] [ –]Up Down Volume Note: ¡The sound level for each source is stored in memory. [TILT] [s]or [d] Tilt Angle Mutes the sound. To cancel, press again. [MUTE] [MUTE]Mute Note: ¡ After adjusting its angle, also adjust the brightness as well. (apage 34) ¡The car model and installation conditions may impose some restrictions on the adjustment of the monitors angle. Setting Range: – 82 dB to 0 dB, default: – 40 dB Note: ¡The volume level can be set independently for each source and each disc format. Warning ¡Do not touch the unit while the display is moving. Inserting hands, fingers or for- eign objects into the unit can cause injuries and damage to the unit. General Operations (continued)
17 18CQ-VD6503U English Before Disc Playback Discs that can be Played Back ❒Symbols used on jackets (Examples of such symbols include) ¡: Number of subtitle languages ¡: Number of audio tracks ¡: Number of angles The numbers indicate the number of languages, tracks, angles, etc., recorded on the disc. Screen size (H:V aspect ratio) ¡: 4:3 standard size ¡: Letterbox (apage 38) ¡ 16:9 wide size : Playback in format on a standard screen (4:3). : Playback in (apage 38) format on a standard screen (4:3). Note: ¡The size of the image that is displayed on the screen depends on the screen mode (“Aspect Ratio” apage 40), and on the screen size for the content on the disc. ❒Region Management Information This product is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this product, this product does not play the disc. PAN & SCANPS 16: 9 LETTERBOXLB 16: 9 LB 4: 3 3 2 2 The Region number for this product is “1” and “ALL”. ❒Disc Type 1ALL12 46 Example: TEXT Recordable ReWritable DISC DVDVCD (Video CD)CD CD-R/RW Mark/logo Disc Size12 cm {5”} Video FormatNTSC/PAL Audio FormatLPCM, MPEG1, MPEG2, dts, Dolby DigitalLPCM, MPEG1LPCM (CD-DA), dtsLPCM (CD-DA), MP3/ WMA Region No.1(ALL) ❒Notes on DVD–Rs/RWs ¡Only video formatted discs are playable. Discs in the video recording (VR) format are unplayable. ¡Unfinalized discs are unplayable. ¡Some discs are unplayable depending on the disc itself, device, drive and software that are used for disc recording. ❒Discs not supported The following discs are not played back on this product. ¡DVD-Audio¡DVD-ROM¡DVD-RAM ¡DVD+R¡DVD+RW ¡SVCD¡VSD¡CVD ¡CD-G¡CD-ROM (except MP3/WMA) ¡CD-RW (except MP3/WMA and CD-DA) ¡CD-R (except MP3/WMA and CD-DA) ¡SACD¡Photo CD¡CDV ¡Hybrid SACD (except CD-DA) ¡Divx Video Discs ¡CD-EXTRA (audio-only playback possible) ¡DVDs with a region number other than “1” or “ALL” ¡Playing back a photo CD disc with this unit could damage the data that is recorded on the disc. Note: ¡About CD-Rs/RWs and DVD–Rs/RWs, refer to “Notes on CD-Rs/RWs and DVD–Rs/RWs”. (apage 48) ¡Some copy-protected music CDs are not playable.
18 19CQ-VD6503U English ASPECTMUTE MENUNAVI TUNE FOLDERALBUM TRACK SRC VOL ASPP-MODE PWR TILT CQ-VD6503U Disc Eject Press [u]to stop playback and eject the disc. (Press [u]again to reload the disc.) Note: ¡If you leave a disc in the slot for more than 30 seconds after its ejection, the disc will be automatically reloaded after loud beep is energized three times. ¡Due to limitations of certain discs, some DVD and VCD (Video CD) discs may not operate as described in this manual. Refer to the disc jacket for further details. ¡This unit does not support DVD and VCD (Video CD) karaoke functions. DVDDVDDVDVCDVCDVCDCDMP3WMACH-C [u] (eject) Printed side Disc Insert/Eject Caution ¡When the disc is inserted or ejected, to prevent disc scratches never exert any downward force on the disc. Disc Insert Press [u]to open the display. ¡The mode that supports the disc is selected, and play- back starts. When a disc is in the player, change to disc player mode (CD, MP3, WMA, DVD or VCD (Video CD)) and playback starts.¡The audio format is automatically identified. (apage 18) ¡When the menu screen appears, see “Chapter/title Selection” on page 22. Note: ¡The power will be turned on automatically when a disc is loaded. ¡You can play a disc even if the monitor is closed. ¡The sound may be interrupted for a few moments while the audio format is being identified. DVDDVDDVDVCDVCDVCDCDMP3WMACH-C Warning ¡Do not touch the unit while the display is moving. Inserting hands, fingers or foreign objects into the unit can cause injuries and damage to the unit. DVDDVDDVDVCDVCDVCDCDMP3WMACH-C Caution ¡Do not use irregularly shaped discs. ¡Do not insert foreign object into the disc slot. ¡This unit does not support 8-cm disc. In case of load such a disc, eject and remove the disc from the slot immediately.
19 20CQ-VD6503U English Disc Player Video Mode ❒Folder/File/Track Selection qTouch (folder name) to select a folder. , : scrolls up/down the file list by 1 page. , : scrolls up/down the file list by 1 line. wTouch (file name) to play. qPress []], [[], [}]or [{]to select a folder. []][[]: movement among different lev- els of trees [}][{]: movement in the same tree wPress [ENTER]. : Folder : MP3/WMA file Note: ¡It is not possible to display the whole tree and file list in a folder. ¡The displayed contents on the touch panel vary with circumstances. DVDmode display CDmode display MP3/WMAmode display VCD (Video CD)mode display Source ButtonPlaying time Operation Buttons Audio Mode Source ButtonPlaying time Operation Buttons Source ButtonPlaying time Operation Buttons Title/text scroll Folder selection Source ButtonCurrent track Playing time Operation Buttons Title/text scroll (Example: MP3 mode) Source Button qTouch “ Source Button” . d wTouch (DVD)on the Source Selection Screen. Disc Mode ( DVD) Selection ASPECTMUTE MENUNAVI TUNE FOLDERALBUM TRACK SRC VOL ASPP-MODE PWR TILTCQ-VD6503U SRC [SRC] [}] [{] [s] [d] To switch Operation Screen ON, touch the center of touch panel.(Only for Video Mode) Press [SRC]to change to the desired mode.