Panasonic Kx-Tvp150 Voice Processing System Summary Of Operations Manual

							Setting Up the Alternate 
Extension 
1 
2 
3 
4 Go to the subscriber’s main command menu. 
Press E) for Other Features. 
To check mailbox distribution, press [I]. 
For automated attendant status, press (21. 
For mailbox management, press (31. 
Press m for Automated Attendant status. 
To set call transfer status, press [I]. 
Press m for other options. 
To set call transfer status, press [I]. 
To set alternate extension transfer status, 
press [2]. 
To set up alternate extension, press [3]. 
To record a personal bulletin message, 
press [4]. 
To set personal bulletin board status, 
press (51. 
To set message reception mode, press [6]. 
5 Press a to set up the alternate extension. 
Alternate extension is unassigned. 
Or 
Current alternate extension is 
To change this setting, press [I]. 
Otherwise, press [2]. 
3-6 Subscriber - Setup  
						

							Setting Up the Alternate 
Extension 
6 Press 0 to set the extension. 
Please enter the alternate extension followed 
by a pound sign. 
7 Enter the extension number. 
8 Review the number you have just entered. 
9 Press H to accept. 
*********c************************************ 
Hint 
Step 6 - You can accept the status by pressing 
r-4. 
*************************c********************* 
Subscriber - Setup 3-7  
						

							w : 
Recording Personal 
Bulletin Messages 
Go to the subscriber’s main command menu. 
Press m for Other Features. 
Press a for Automated Attendant status. 
To set call transfer status, press [I]. 
To set alternate extension transfer status, 
Press 0 for the Help menu, then press m to 
record personal bulletin messages. 
Personal bulletin menu is not recorded. 
To record a bulletin menu, press [I]. 
Otherwise, press [2]. 
Press 0 record a bulletin menu. 
Please state the bulletin message at the tone. 
To end recording, press [I]. 
To pause and restart recording, press [2/. 
Review the message. 
Press m to accept. 
3-8 Subscriber - Setup  
						

							Recording Personal 
Bulletin Messages 
Review the next message. 
The bulletin message . is /The bulletin 
message is not recorded. 
To change this message, press [I J. 
Otherwise, press [2 J. 
10 Press 0 to record a message. 
To record a new message, press [I J. 
To erase this message, press [2]. 
11 Press 0 t o record a new message. 
12 Pl ease state the bulletin message at the tone. 
To end recording, press [l]. 
To pause and restart recording, press [2]. 
13 Review the message. 
14 Press m to accept the message. 
********************************************** 
Hint 
Step 3 - You can skip hearing the Help menu. 
Step 4 - If you have recorded a bulletin menu, 
you can go to Step 9 directly. 
Step 10 -You can review the next message by 
pressing [2]. 
Step 11 -You can erase the message by 
pressing [2]. 
Step 12 -You will return to Step 9. 
x********************************************* 
Subscriber - Setup 3-9  
						

							Setting Personal Bulletin 
Board Status 
1 
2 
3 
4 
5 
6 Get to the subscriber’s main command menu. 
Press IE) for Other Features. 
To check mailbox distribution, press [I]. 
For automated attendant status, press [2]. 
For mailbox management, press [3]. 
Press m for Automated Attendant Status. 
To set call transfer status, press [I]. 
Press a for other options. 
To set call transfer status, press [l]. 
To set alternate extension transfer status, 
press [2]. 
To set up alternate extension, press [3]. 
To record a personal bulletin message, 
press [4]. 
To set personal bulletin board status, 
press [SJ. 
To set message reception mode, press [6]. 
Press m to set personal bulletin board status. 
Personal bulletin board is enabled /disabled. 
To enable personal bulletin board, press [I]. 
To disable, press [2]. 
Press 0 to enable personal bulletin board. 
or 
Press a to disable personal bulletin board. 
Personal bulletin board is enabled/disabled. 
3-10 Subscriber - Setup  
						

							Setting Personal Bulletin 
Board Status 
******************************x**************** 
Hint 
Step 4 - You can skip hearing other options. 
********************************************** 
Subscriber - Setup 3-11  
						

							Enabling/Disabling the 
Interview Mailbox 
1 
2 
3 Go to the subscriber’s main command menu. 
Press m for Other Features. 
Press m for setting Automated Attendant Sta- 
tus. 
4 
5 
6 
To set call transfer status, press [l J. 
To set alternate extension transfer status, 
Press m for other options. 
To set call transfer status, press [I]. 
To set alternate extension transfer status, 
press [2]. 
To set up alternate extension, press [3]. 
To record a personal bulletin message, 
press [4]. 
To set personal bulletin board status, 
press [.5]. 
To set message reception mode, press [6]. 
Press m to set message reception mode. 
Current message reception mode is interview 
mode/message recording mode. 
To set to interview mode, press [l]. 
To set to message recording mode, press 
L [Il. 1 
Press 0 to set the message reception mode to 
Interview mode. 
Current message reception mode is interview 
mode. 
********************************************** 
Hint 
Step 6 - You can disable the interview 
mailbox by pressing [2]. 
*******************************a************** 
3-12 Subscriber - Setup  
						

							Customizing Your Mailbox 
1 
2 
3 
4 
5 
6 
7 
8 Go to the subscriber’s main command menu. 
Press m for Other Features. 
Press m for Mailbox Management. 
Press 0 to customize your mailbox. 
Review the current personal greeting. 
Current personal greeting is . . /Personal 
greeting is not recorded. 
To change the personal greeting, press [I]. 
To accept, press [2]. 
To erase the greeting, press [3]. 
Press 0 to set the personal greeting. 
Please state your greeting at the tone. 
To end recording, press [I]. 
To pause and restart recording, press [2 J. 
Record your greeting and press 0 . 
The personal greeting is . 
To change the personal greeting, press [I]. 
To accept, press [2]. 
To erase the greeting, press (31. 
Press m to accept the greeting. 
Subscriber - Setup 3-13  
						

							Customizing Your Mailbox 
9 Review the current password status. 
Current password is /Password is 
unassigned. 
To change this setting, press [I]. 
Otherwise, press [2]. 
10 
11 
12 
13 
14 Press 0 to set the mailbox password. 
Please enter the password, followed by a 
pound sign. 
Enter the password and a pound sign a . 
Review the password. 
The password you just entered is __.. 
To change this setting, press [l]. 
Otherwise, press (21. 
Press H to accept. 
Review the owner’s name. 
Current owner’s name is . . /No owner’s 
name is recorded. 
To change the name, press [l]. 
To accept, press [2]. 
To erase the name, press [3]. 
3-14 Subscriber - Setup  
						

							Customizing Your Mailbox 
15 
16 
17 Press 0 to record the owner’s name. 
Please say your name at the tone. 
Record your name. 
>I 
Review the owner’s name and accept it by press- 
ing m. 
***********************y*********************** 
Hint 
Step 3 - You can skip hearing the Help menu. 
Step 6 - You can accept the greeting and go 
to Step 9 directly by pressing [2]. 
You can erase the greeting by 
pressing [3]. 
Step 8 - You can change your greeting by 
pressing [ 11. 
Step 10 -You can accept the password and go 
to Step 13 directly by pressing [2]. 
Step 15 -You can accept the owner’s name by 
pressing [2]. 
You can erase the name by pressing 
131. 
********************************************** 
Subscriber - Setup 3-15