Panasonic Kx Tgl430 Operating Instructions Manual

calling (ringer ID), if you have subscribed to
Caller ID service.
Changing group names/setting ringerID
The default group name is  “Group 1 ” to
“ Group 9 ”.
1 MF N W  a  M MENU N
2 Mb N:  “Group ” a  M SELECT N
3 Mb N: Select the desired group.  a
M SELECT N
4 To change group names
Mb N:  “Group name ” a  M SELECT N a
Edit the name (10 characters max.).  a
M SAVE N
To set group ringer tone
M b N: Select the current setting of the
group ringer tone.  a M SELECT N a  M b N:
Select  the  desired  ringer...

Speed dialYou can assign 1 phone number to each of
the dial keys ( 1 to  9) on the handset.
Adding phone numbers to speed
dial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Manual ” a  M SELECT N
3 Enter the party’s name (16 characters
max.).  a M OK N
4 Enter the party’s phone number (24
digits max.).  a M OK N a  M SELECT N
a  M OFF N
n From the phonebook:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:...

Menu list
To access the features, there are 2 methods.
nScrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
2 Select the desired setting.  a M SAVE N
Note:
R To exit the operation, press...

Sub-menu 1Sub-menu 2SettingsCode
New message
alert*1Outgoing call
–
On/OffOn
#33837
Outgoing call
–Notification to–
Outgoing call
–Remote codeActivate

Base unit beepOn
#33937
SettingsRing count *1Toll saver
2-7 rings
#21140
Recording time *1<
3 min >
1 min
Greeting only *2#30540
Remote code*1<
111 >#30638
Screen call
Off#31039
Answer on *1––#32735
Answer off *1––#32835
Main menu:  “
Voicemail access ”
OperationCode
Listening to voicemail messages.#33041
Main menu:  “Intercom ”
OperationCode
Paging the...

Main menu:  “Speed dial ”
OperationCode
Viewing the speed dial entry.#26122
Main menu:  “Settings ”
Sub-menu 1Sub-menu 2SettingsCode
Ring adjustmentsRinger volume
(Incoming)
(Handset)Off –6 #160–
Intercom ringer
volume
(Handset)1–6 #175–
Ringer tone
(Incoming) *4, *5
(Handset)< Tone 1 >#161–
Intercom ringer
tone*4, *5
(Handset)< Tone 3 >#163–
Silent mode
–On/OffOn
#23829
Silent mode
–Start/End#23730
Silent mode
–Select groupGroup 1-9#24130
Set date & timeDate and time *1–#10112
Memo alarm
–
Alarm1-3...

Sub-menu 1Sub-menu 2SettingsCode
Key detector
setting*6
– 1:Add new
device  (for
Detector1 )*7
– 2:Add new
device  (for
Detector2 )
– 3:Add new
device  (for
Detector3 )
– 4:Add new
device  (for
Detector4 )Change name *1Detector1#6561–
Detector2*8#6562*8
Detector3 *8#6563*8
Detector4 *8#6564*8
Registration–#6571–
#6572*8
#6573*8
#6574*8
Deregistration–#6581–
#6582*8
#6583*8
#6584*8
Call block *1Block a single
number–#21718
Block range of
numbers–19
Block unknown CID
( CID : Caller ID)Block  
< Unblock...

Sub-menu 1Sub-menu 2SettingsCode
Caller ID edit
(Caller ID number auto edit)–< On > 
Off#21434
Auto talk *9–On
 
< Off >#20015
Set tel lineSet dial mode *1<
Tone >
Pulse#12013
Set flash time *1, *1080 ms
90 ms
100 ms
110 ms
160 ms
200 ms
250 ms
300 ms
400 ms
600 ms
<
700 ms >
900 ms#12115
Set line mode *1, *11A
 < B>#122–
Call sharing *1–<
On > 
Off#19416
RegistrationRegister handset–#13032
Deregistration *2–#13132
Change languageDisplay<
English > 
Español#11012
Announcement *1<
English >...

Main menu:  “Key detector ”*6
Sub-menu 1Sub-menu 2SettingsCode
Search––#655–
Battery check––
*1 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select  “Caller...

AlarmAn alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
1 MMENU N#720
2 Mb N: Select the desired alarm.  a
M SELECT N
3 Mb N: Select the desired alarm option....

2Mb N: Select the desired setting.  a
M SAVE N
R If you select  “Off ”, press  MOFF N to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select  “AM ” or  “PM ”.  a  M OK N
5 Enter the desired hour and minute you
wish to end this feature.
6 *: Select  “AM ” or  “PM ”.
7 MSAVE N a  M OFF N
Changing the start and end time
1 MMENU N#237
2 Continue from step 3, “Turning silent
mode on/off”, page 29.
Selecting groups to bypass silent
mode
1MMENU N#241
2 Mb N: Select the desired...