Panasonic Kx Tgl430 Operating Instructions Manual

Controls
Handset
Shoulder gripSpeakerMjN/MkN  (VOL.: Volume up/down)M/ZN  (TALK/Speakerphone)Dial keypad ( *: TONE)MicrophoneReceiverDisplayMOFF N ()Charge contacts
n Control type Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display.
  Navigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through
various lists and items.
– MD N (Mute): Put the call on mute.
– MF N W : View the phonebook entry.
– ME N (Redial/CID: Caller ID): View the
redial list or caller...

Display icons
Handset display items
ItemMeaning
Within base unit range
Out of base unit range
The line is in use.
RWhen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
Eco mode is on. (page 10)
Noise reduction is set.
(page 16)
Equalizer is set. (page 16)
ZSpeakerphone is on.
(page 14)
Ringer volume is off.
(page 15, 25)
Silent mode is on. (page 29)
Call sharing mode is off.
(page 27)
Alarm is on. (page 29)
Handset number
Battery level
Blocked call...

Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 35 for details.
1MMENU N#302
2 Mb N:  “Yes ” a  M SELECT N
3 Record a greeting message.  a M STOP N
a  M OFF N
Other settings
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is  “Tone ”.
“ Tone ”: For tone dial service.
“ Pulse ”: For rotary/pulse dial service.
1 MMENU N#120
2 Mb N: Select the desired...

Making calls1 Lift the handset and then dial the phone
number.
RTo correct a digit, press  MCLEAR N.
2 Press  M
/Z N to make the call.
R To make the call using the
speakerphone, press and hold  M
/
Z N for a few seconds.
3 When you finish talking, press  MOFF N or
place the handset on the base unit or
charger.
Note:
R While talking, you can switch between the
receiver and the speakerphone by pressing
M
/Z N.
R In step 1, you can store the dialed phone
number to the phonebook by pressing
MSAVE N....

Erasing all numbers in the redial
list
1ME N (Redial/CID)
R If the caller list is displayed, press  ME N
(Redial/CID) again to switch to the
redial list.
2 MMENU N a  M b N:  “Erase all ”a
M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Answering calls
1 When the unit rings, lift the handset.
nTo answer using the receiver
Press  M
/Z N.
n To answer using the speakerphone
Press and hold  M
/Z N for a few
seconds.
2 When you finish talking, press  MOFF N or
place the handset on the base unit or...

receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed on the unit
that is in use after you hear the call waiting
tone.
1 Press  MACCEPT N to answer the 2nd call.
2 To switch between calls, press  MFLASH N.
Note:
R M ACCEPT N and  MFLASH N are soft keys
visible on the display during a call.
R Please contact your phone service provider
for details and availability of this...

4Wait for the paged party to answer.
RIf the paged party does not answer,
press  MBACK N to return to the outside
call.
5 To complete the transfer:
Press  MOFF N.
To establish a conference call:
M MENU N a  M b N:  “Conference ” a
M SELECT N
R To leave the conference, press  MOFF N.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENU N a  M b N:  “Hold ” a
M SELECT N
To resume the conference:  MMENU N
a  M b N: “ Conference ” a  M SELECT N
R To cancel the...

Call blockYou can press the  MC N (Call Block) key in the
following situations to disconnect the current
call and add a phone number to the call block
list:
– when an incoming call is being received
– when an incoming call is being recorded by the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
1 Press  MC N (Call Block) under the
situations shown above.
2 Confirm the call block...

4Enter the phone number (24 digits max.).
a M SAVE N a  M OFF N
Storing a range of number
1 MC N (Call Block)
2 Mb N:  “Block range of numbers ” a
M SELECT N
3 MMENU N a  M b N:  “Add ” a  M SELECT N
4 Enter the desired number (2-8 digits).  a
M SAVE N a  M OFF N
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers or out of area
calls.
1 MC N (Call Block)
2 Mb N:  “Block unknown CID ” a
M SELECT N
3 Mb N: Select the desired...

PhonebookYou can add 100 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook, and assign each phonebook entry
to the desired group (page 20).
Important:
R All entries can be shared by any registered
handset.
Adding phonebook entries
1 MF N W  a  M MENU N
2 Mb N:  “Add new entry ” a  M SELECT N
3 Enter the party’s name.  a M OK N
4 Enter the party’s phone number.  a M OK N
5 Mb N: Select the desired group.  a
M SELECT N 2 times  a M OFF N
Note:
R In step 3, you can switch the...