Panasonic Kx Tgl430 Operating Instructions Manual

							
calling (ringer ID), if you have subscribed to
Caller ID service.
Changing group names/setting ringerID
The default group name is  “Group 1 ” to
“ Group 9 ”.
1 MF N W  a  M MENU N
2 Mb N:  “Group ” a  M SELECT N
3 Mb N: Select the desired group.  a
M SELECT N
4 To change group names
Mb N:  “Group name ” a  M SELECT N a
Edit the name (10 characters max.).  a
M SAVE N
To set group ringer tone
M b N: Select the current setting of the
group ringer tone.  a M SELECT N a  M b N:
Select  the  desired  ringer  tone.  a  M SAVE N
5 MOFF N
Finding and calling from a
phonebook entry
1 MFN W
2 To scroll through all entries
Mb N: Select the desired entry.
To search by first character
Press the dial key ( 0 to  9, or  #)
which contains the character you are
searching for.
M b N: Scroll through the phonebook if
necessary.
To search by group
M GROUP NMb N: Select the desired group.  a
M SELECT N
Mb N: Scroll through the phonebook if
necessary.
3 M
/ZN
Editing entries
1 Find the desired entry (page 21).
2 MMENU N a  M b N:  “Edit ” a  M SELECT N
3Edit the name if necessary.  a M OK N
4 Edit the phone number if necessary.  a
M OK N
5 Mb N: Select the desired group (page 20).
a  M SELECT N 2 times  a M OFF N
Erasing entries
Erasing an entry
1 Find the desired entry (page 21).
2 MMENU N a  M b N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Erasing all entries
1 MF N W  a  M MENU N
2 Mb N:  “Erase all ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N
4 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1 During an outside call, press  MF N W .
2 Mb N: Select the desired entry.
3 Press  MCALL N to dial the number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press  MD N (Pause) to add
pauses after the number and PIN as
necessary (page 14).
R If you have rotary/pulse service, you need
to press  * (TONE) before pressing  MF N
W  in step 1 to change the dialing mode
temporarily to tone. When adding entries to
the phonebook, we recommend adding  *
(TONE) to the beginning of phone numbers
you wish to chain dial (page 20).
For assistance, please visit http://shop.panasonic.com/support21
Phonebook

TGL43x(en)_1117_ver041.pdf   212015/11/17   16:08:03       
						

							
Speed dialYou can assign 1 phone number to each of
the dial keys ( 1 to  9) on the handset.
Adding phone numbers to speed
dial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Manual ” a  M SELECT N
3 Enter the party’s name (16 characters
max.).  a M OK N
4 Enter the party’s phone number (24
digits max.).  a M OK N a  M SELECT N
a  M OFF N
n From the phonebook:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Phonebook ” a  M SELECT N
3 Mb N: Select the desired entry.  a
M SAVE N a  M OFF N
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.
Editing an entry
1 Press and hold the desired speed dial key
(1  to  9). a  M MENU N
2 Mb N:  “Edit ” a  M SELECT N
3 Edit the name if necessary.  a M OK N
4 Edit the phone number if necessary.  a
M OK N a  M SELECT N a  M OFF N
Erasing an entry
1 Press and hold the desired speed dial key
(1  to  9). a  M MENU N
2 Mb N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Viewing an entry/Making a call
1 Press and hold the desired speed dial key
(1  to  9).
2 To make a call, press  M
/Z N.
22For assistance, please visit http://shop.panasonic.com/support
Phonebook

TGL43x(en)_1117_ver041.pdf   222015/11/17   16:08:03  
						

							
Menu list
To access the features, there are 2 methods.
nScrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
2 Select the desired setting.  a M SAVE N
Note:
R To exit the operation, press  MOFF N.
R In the following table, < > indicates the default settings.
R In the following table, 
 indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
Main menu:   W “Phonebook ”
OperationCode
Viewing the phonebook entry.#28021
Main menu:  “Caller list ”
OperationCode
Viewing the caller list.#21333
Main menu:  “Answering device ”
Sub-menu 1Sub-menu 2SettingsCode
Play new message––#32336
Play all message––#32436
Erase all
message*1––#32537
GreetingRecord greeting *1–#30235
Check greeting–#30336
Pre-recorded*1
(Reset to pre-recorded greeting)–#30435
For assistance, please visit http://shop.panasonic.com/support23
Programming

TGL43x(en)_1117_ver041.pdf   232015/11/17   16:08:03       
						

							
Sub-menu 1Sub-menu 2SettingsCode
New message
alert*1Outgoing call
–
On/OffOn
#33837
Outgoing call
–Notification to–
Outgoing call
–Remote codeActivate

Base unit beepOn
#33937
SettingsRing count *1Toll saver
2-7 rings
#21140
Recording time *1<
3 min >
1 min
Greeting only *2#30540
Remote code*1<
111 >#30638
Screen call
Off#31039
Answer on *1––#32735
Answer off *1––#32835
Main menu:  “
Voicemail access ”
OperationCode
Listening to voicemail messages.#33041
Main menu:  “Intercom ”
OperationCode
Paging the desired unit.#27417
Main menu:  “Set date & time ”
Sub-menu 1Sub-menu 2SettingsCode
Date and time*1––#10112
Memo alarmAlarm1-3<
Off >
Once
Daily
Weekly#72029
Time  adjustment *1,
 *3–< Caller ID
auto >
Manual#226–
24For assistance, please visit http://shop.panasonic.com/support
Programming

TGL43x(en)_1117_ver041.pdf   242015/11/17   16:08:03        
						

							
Main menu:  “Speed dial ”
OperationCode
Viewing the speed dial entry.#26122
Main menu:  “Settings ”
Sub-menu 1Sub-menu 2SettingsCode
Ring adjustmentsRinger volume
(Incoming)
(Handset)Off –6 #160–
Intercom ringer
volume
(Handset)1–6 #175–
Ringer tone
(Incoming) *4, *5
(Handset)< Tone 1 >#161–
Intercom ringer
tone*4, *5
(Handset)< Tone 3 >#163–
Silent mode
–On/OffOn
#23829
Silent mode
–Start/End#23730
Silent mode
–Select groupGroup 1-9#24130
Set date & timeDate and time *1–#10112
Memo alarm
–
Alarm1-3
Once
Daily
Weekly#72029
Time adjustment *1, *3<
Caller ID
auto >
Manual#226–
Talking caller IDHandset< On >
Off#16233
Base unit *1On
<
Off >#G 162
For assistance, please visit http://shop.panasonic.com/support25
Programming

TGL43x(en)_1117_ver041.pdf   252015/11/17   16:08:03     
						

							
Sub-menu 1Sub-menu 2SettingsCode
Key detector
setting*6
– 1:Add new
device  (for
Detector1 )*7
– 2:Add new
device  (for
Detector2 )
– 3:Add new
device  (for
Detector3 )
– 4:Add new
device  (for
Detector4 )Change name *1Detector1#6561–
Detector2*8#6562*8
Detector3 *8#6563*8
Detector4 *8#6564*8
Registration–#6571–
#6572*8
#6573*8
#6574*8
Deregistration–#6581–
#6582*8
#6583*8
#6584*8
Call block *1Block a single
number–#21718
Block range of
numbers–19
Block unknown CID
( CID : Caller ID)Block  
< Unblock >#24019
One ring for blocked
call
No#17319
Speed dial––#26122
Record greeting *1––#30235
VoicemailSave VM access#*1
( VM : Voicemail)–#33141
VM tone detect *1<
On > 
Off#33241
LCD contrast
(Display contrast)–Level 1–4 #145–
Handset name––#10432
Display name–On  
< Off >#10532
Redial mode–
Recent dialed#65914
Auto intercom–On  
< Off >#27317
Key tone–
Off#165–
26For assistance, please visit http://shop.panasonic.com/support
Programming

TGL43x(en)_1117_ver041.pdf   262015/11/17   16:08:03  
						

							
Sub-menu 1Sub-menu 2SettingsCode
Caller ID edit
(Caller ID number auto edit)–< On > 
Off#21434
Auto talk *9–On
 
< Off >#20015
Set tel lineSet dial mode *1<
Tone >
Pulse#12013
Set flash time *1, *1080 ms
90 ms
100 ms
110 ms
160 ms
200 ms
250 ms
300 ms
400 ms
600 ms
<
700 ms >
900 ms#12115
Set line mode *1, *11A
 < B>#122–
Call sharing *1–<
On > 
Off#19416
RegistrationRegister handset–#13032
Deregistration *2–#13132
Change languageDisplay<
English > 
Español#11012
Announcement *1<
English > 
Español#11212
Main menu:  “ Customer support ”
OperationCode
Displaying customer support Web address.#680–
Main menu:  “Baby monitor ”
Sub-menu 1Sub-menu 2SettingsCode
On/Off–On
#26830
Sensitivity level–Low

High#26931
For assistance, please visit http://shop.panasonic.com/support27
Programming

TGL43x(en)_1117_ver041.pdf   272015/11/17   16:08:03      
						

							
Main menu:  “Key detector ”*6
Sub-menu 1Sub-menu 2SettingsCode
Search––#655–
Battery check––
*1 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select  “Caller ID auto ”. To turn this feature off, select
“ Manual ”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 2). If you select a melody, you cannot distinguish lines by their ringers.
*5 The preset melodies in this product ( “Tone 3 ” -  “Melody 10 ”) are used with permission of
© 2004 - 2013 Copyrights Vision Inc.
*6 This setting is available when you have the key detector (KX-TGA20). Read the installation manual for more information on the key detector.
*7 For models with supplied key detectors, the display shows “ 1: Detector1 ”.
*8 If you register 2 or more key detectors.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*10 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at  “700 ms ” unless pressing  MACCEPT N fails
to pick up the waiting call.
*11 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to  “A ” if telephone line condition is not good.
28For assistance, please visit http://shop.panasonic.com/support
Programming

TGL43x(en)_1117_ver041.pdf   282015/11/17   16:08:03   
						

							
AlarmAn alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
1 MMENU N#720
2 Mb N: Select the desired alarm.  a
M SELECT N
3 Mb N: Select the desired alarm option.  a
M SELECT N
“Off ”
Turns alarm off. Go to step 10.
“ Once ”
An alarm sounds once at the set time.
“ Daily ”
An alarm sounds daily at the set time.
Go to step 5.
“ Weekly ”
Alarm sounds weekly at the set time(s).
4 Proceed with the operation according to
your selection in step 3.
nOnce:
Enter the desired month and date.  a
M OK N
n Weekly:
M b N: Select the desired day of the week
and press  MSELECT N.  a  M OK N
5 Set the desired time.
6 *: Select  “AM ” or  “PM ”.  a  M OK N
7 Enter a text memo (10 characters max.).
a M OK N
8 Mb N: Select the desired alarm tone.  a
M SELECT N
R We recommend selecting a different
ringer tone from the one used for
outside calls.
9 Mb N: Select the desired snooze setting.
a  M SAVE N
10 MSELECT N a  M OFF N
Note:
R Press  MSTOP N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or  MSNOOZE N to stop
the sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Silent mode
Silent mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Silent mode can
be set for each unit.
Using the phonebook’s group feature
(page 20), you can also select groups of
callers whose calls override silent mode and
ring the unit (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
R We recommend turning the base unit ringer
off (page 15) in addition to turning the silent
mode on.
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1 MMENU N#238
For assistance, please visit http://shop.panasonic.com/support29
Programming

TGL43x(en)_1117_ver041.pdf   292015/11/17   16:08:03 
						

							
2Mb N: Select the desired setting.  a
M SAVE N
R If you select  “Off ”, press  MOFF N to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select  “AM ” or  “PM ”.  a  M OK N
5 Enter the desired hour and minute you
wish to end this feature.
6 *: Select  “AM ” or  “PM ”.
7 MSAVE N a  M OFF N
Changing the start and end time
1 MMENU N#237
2 Continue from step 3, “Turning silent
mode on/off”, page 29.
Selecting groups to bypass silent
mode
1MMENU N#241
2 Mb N: Select the desired groups.  a
M SELECT N
R “
” is displayed next to the selected
group numbers.
R To cancel the selected group:
Mb N: Select the group.  a Press
M SELECT N again. “
” disappears.
3 MSAVE N a  M OFF N
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or even while away from home. The
monitored handset (placed in a baby’s room,
for example) will automatically call the
monitoring handset or the phone number
stored when it detects sound.
Important:
R Before using this feature, we recommend
that you test this feature and adjust the
baby monitor sensitivity as needed,
especially if you plan to monitor from
outside.
R This feature should not be used as a
substitute for a medical or caregiver’s
supervision. It is the caregiver’s
responsibility to stay close enough to
handle any eventuality.
Note:
R If the unit is connected to a PBX system,
you cannot set the baby monitor.
R During the monitoring mode, battery
consumption is faster than usual. We
recommend leaving the monitored handset
on the base unit or charger.
R The monitored handset never rings while it
is being monitored. If the base unit is
placed near the monitored handset, we
recommend turning off the base unit ringer
volume (page 15).
Setting the baby monitor
Perform the setting operation with the handset
to be monitored (for example, the handset
placed in a baby’s room).
To monitor with a unit
The internal baby monitor feature is available
between handsets.
1 MMENU N#268
2 Mb N:  “On ” a  M SELECT N
3 Mb N: Select the desired unit’s number to
monitor with.  a M SAVE N
R “Baby monitor ” will be displayed.
R The registered unit’s name/number is
displayed.
Note:
R When this feature is on, another handset
can hear the monitored handset by making
an intercom call.
To monitor from outside
If you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
30For assistance, please visit http://shop.panasonic.com/support
Programming

TGL43x(en)_1117_ver041.pdf   302015/11/17   16:08:03