Panasonic Kx Tge210 Operating Instructions Manual

Key Operation
8 Turn answering system on
M PAUSE N
Pause message * 2
9  
or
MSTOP N Stop recording
S
top playback
0 Turn answering system off
*4 *
 3
Erase currently playing
m
essage
*5 Erase all messages
*6 Reset to a pre-recorded
g

reeting message *1 If pressed within the first 5 seconds of a
m
 essage, the previous message is
played.
*2 To resume playback: Mb N:  “Playback ” a  M SELECT N
*3 You can also erase as follows: MPAUSE N a  M b N:  “Erase ” a
M SELECT N a  M b N:  “Yes ” a  M SELECT...

2
Mb N:  “Notification to ” a
M SELECT N a  M ADD N
3 Mb N:  “Phonebook ” a  M SELECT N
4 Mb N: Select the desired phonebook
entry.  a M SAVE N a  M OFF N
n By entering a phone number:
1 MMENU N#338
2 Mb N:  “Notification to ” a
M SELECT N a  M ADD N
3 Mb N:  “Manual ” a  M SELECT N
4 Enter the desired name (16 characters
max.).  a M OK N
5 Enter the desired number (24 digits
max.).  a M OK N a  M SELECT N a
M OFF N Turning on/off the new message alert
s

etting
1 MMENU N#338
2 Mb N:  “On/Off ” a  M...

unit to listen to messages or change
a
nswering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations. Remote access code
A
  3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is  “111 ”.
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1...

R
You can either hang up, or enter your
remote access code again and begin
remote operation (page 42). Answering system settings
Call screening
Handset / Base unit
*
 1
While a caller is leaving a message, you can
listen to the call through the unit’s speaker.
To adjust the speaker volume, press  Mj N or
M k N repeatedly.
You can answer the call by pressing  M N
 
on
the handset or  MZ N on the base unit *1
.
Call screening can be set for each unit. The
default setting is  “On ”.
1 For handset setting :...

Note:
R
W
hen you select  “Greeting only ”:
– If you do not record your own message, the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the greeting-only message asking callers to
call again later (page 39).
For assistance, please visit http://www.panasonic.com/help 45Answering System
TGE21x23x24x(en)_1122_ver031.pdf45   452013/11/22   14:22:29 

Voice mail service
V oice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. Please contact
your service provider/telephone company for
details of this service.
Important:
R To use the voice...

Handset
1 MM
ENUN#330
R The speakerphone turns on.
2 Follow the pre-recorded instructions.
3 When finished, press  MOFF N.
Note:
R You can also use the  MACCESS N soft key,
if displayed, to play new voice mail
messages.
R If the handset still indicates there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding  # until the handset beeps. Base unit
*
 1
*1 KX-TGE240 series: page 3
To listen to voice mail messages, you have to
dial your voice mail access...

3
Insert the hooks on the wall mounting
adaptor into holes ( ) and ( ) on the
b
ase unit. 4
A
djust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place. 5
M
ount the unit on a wall then slide down
to secure in place.  AC adaptor cord R
T
his product is compliant with the
following wall phone plate sizes (2
types).  83 mm (3 
1
/4  
 inches)  102 mm (4 inches)
F
it the slots of the unit onto the
corresponding wall phone plate tabs
for ( ) and ( )...

To remove the wall mounting adaptor
W
hile pushing down the release levers ( A),
remove the adaptor ( B). Charger
D

rive the screws ( ) (not supplied) into the
w

all.  27.2 mm (1 
1
/1
 6 inches) For assistance, please visit http://www.panasonic.com/help
49Useful Information
TGE21x23x24x(en)_1122_ver031.pdf49   492013/11/22   14:22:29B
AA 1 2 1 2  

Error messages
Display message Cause/solution
Ask phone
c ompany for
VM access # R
You have not stored the voice mail access number. Store the
number (page 46).
Base no power
o
 r
No link. Re-
connect base
AC adaptor.
or
No link. R
The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been canceled.
Re-register the handset (page...