Panasonic Kx Tge210 Operating Instructions Manual

Battery charging
C
harge for about 7 hours.
R Confirm  “Charging ” is displayed ( ).
R W

hen the batteries are fully charged,
“ Fully charged ” is displayed. Note when setting up
Note for connections
R
T

he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to...

Controls
Handset
Ringer indicator
Belt clip hole Speaker
MjN
/MkN  (VOL.: Volume up/down) M N
 (TALK) Dial keypad (
*:  TONE) Headset jack
M
Z N (
SP-PHONE: Speakerphone) M
FLASH NMCALL WAIT N Microphone
Receiver
Display
M
O
FF N M N
 (NOISE REDUCTION/Smart
function key)  indicator
Charge contacts
n C

ontrol type  
S
oft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display.  
N
avigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through
various lists and items....

Base unit
n
K
X-TGE210 series: page 3 Charge contacts
M /LOCATOR
N
n K

X-TGE230 series: page 3 Charge contacts
Speaker
M
L
OCATES CELL NM
HANDSET LOCATOR NMjN
/MkN  (VOL.: Volume up/down) Message counter
M
A
NSWER ON/OFF NM N
 (PLAY/STOP)
Message indicator M N
 
(Repeat) M N
 (Skip) M
E
RASE N
n KX-TGE240 series: page 3 Charge contacts
Speaker
M
H
OLD N M CONF N M
REDIAL N M PAUSE N M
FLASH N M CALL WAIT N M
Z N (SP-PHONE: Speakerphone)
SP-PHONE indicator Message counter
M N
 
(PLAY/STOP)
Message...

Display icons
Handset display items
Item Meaning
Within base unit range
Out of base unit range
The line is in use.
R
W
hen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received. Eco mode is on. (page 11)
Noise reduction is set.
(
 page 19) Equalizer is set. (page 19)
Z Speakerphone is on.
(
 page 17) Ringer volume is off.
(
 page 29) Silent mode is on. (page 33)
Call sharing mode is off.
(
 page 31) Alarm is on. (page 32)
Handset number
Battery level
Blocked...

4
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example:  9:30
09  30
5 *: Select  “AM ” or  “PM ”.
6 MSAVE N a  M OFF N
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used. Recording your greeting
m

essage
Available for:
K
 X-TGE230/KX-TGE240 series (page 3) You can record your own greeting message
i

nstead of using a pre-recorded greeting
message. See page 39 for...

3
MSAVE N a  M OFF N
Note:
R If the   indicator flashes when the
h

andset is not placed on the base unit or
charger, battery consumption is faster than
usual. Dialing mode
I
 f you cannot make calls, change this setting
according to your telephone line service. The
default setting is  “Tone ”.
“ Tone ”: For tone dial service.
“ Pulse ”: For rotary/pulse dial service.
1 MMENU N#120
2 Mb N: Select the desired setting.
3 MSAVE N a  M OFF N
16 For assistance, please visit http://www.panasonic.com/help...

Making calls
Using the handset
1
L
ift the handset and dial the phone
number.
R To correct a digit, press  MCLEAR N.
2 M N
3 W

hen you finish talking, press  MOFF N or
place the handset on the base unit or
charger. Using the speakerphone
1 D

ial the phone number and press  MZ N.
2 When you finish talking, press  MOFF N.
Note:
R To switch back to the receiver, press  MZ N/
M N
. Making a call using the redial list
T
 he last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1...

Answering calls
Using the handset
W
hen a call is being received, the ringer
indicator and   indicator flash rapidly.
1 L

ift the handset and press  M N
 
or  M N
w
hen the unit rings.
2 When you finish talking, press  MOFF N or
place the handset on the base unit or
charger.
Any key answer:  You can answer the call by
pressing any dial key.
Auto talk:  You can answer calls simply by
lifting the handset (page 31).
Temporary handset ringer off:  You can turn
the ringer off temporarily by pressing  M N
....

Base unit
* 1
*1 KX-TGE240 series: page 3
1 Press  MMUTE N during a call.
R The SP-PHONE indicator flashes.
2 To return to the call, press  MMUTE N. Flash
Handset / Base unit
*
 1
*1 KX-TGE240 series: page 3
M FLASH N allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 31. For call waiting or Call Waiting
C
 aller ID service users
To use call waiting or Call Waiting Caller ID,...

Note:
R
D
epending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone. Call share
Y
 ou can join an existing outside call. Handset
T

o join the conversation, press  M N
 
when
the other unit is on an outside call. Base unit
*
 1
*1 KX-TGE240 series: page 3
To join the conversation, press  MZ N when the
handset is on an outside call.
Note...