Panasonic Kx Tge210 Operating Instructions Manual

Sub-menu 1 Sub-menu 2 Settings Code
Caller ID edit
( Caller ID number
auto edit) –
 
Off #214
38
Auto talk *
 12
–On 
< O
ff > #200
18
Set tel line Set dial mode*
 2
Pulse
 #120
16
Set flash time *
 2, *13
900 ms

600 ms
400 ms 300 ms
250 ms
200 ms 160 ms
110 ms
100 ms 90 ms
80 ms #121
19
Set line mode *
 2, *14
A < B> #122–
Call sharing *
 2
– 
Off #194
20
Registration Register handset –#13035
Deregistration *
 3
–#13135
Power failure –
Off #152
22
Change
l
 anguage Display
 
Español #110
14
Voice...

*2 If you program these settings using one of the units, you do not need to program the same
i tem using another unit.
*3 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
*4 KX-TGE240 series: page 3
*5 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select  “Caller ID auto ”. To turn this feature off, select
“ Manual ”. (Caller...

n
Weekly:
Mb N: Select the desired day of the week
and press  MSELECT N.  a  M OK N
5 Set the desired time.
6 *: Select  “AM ” or  “PM ”.  a  M OK N
7 Enter a text memo (10 characters max.).
a M OK N
8 Mb N: Select the desired alarm tone.  a
M SELECT N
R We recommend selecting a different
ringer tone from the one used for
outside calls.
9 Mb N: Select the desired snooze setting.
a  M SAVE N
10 MSELECT N a  M OFF N
Note:
R Press  MSTOP N to stop the alarm completely.
R When the handset is in use, the...

following items are available when storing
p
hone numbers in the call block list (250 max.).
– “Block a single number ”: The unit
can reject calls from specific phone
numbers.
– “Block range of numbers ”: The unit
can reject calls that begin with a number
stored in the call block list, such as a
toll-free phone number prefix or certain
area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit rings briefly *1
while caller information is being...

2
Mb N:  “Block a single number ” or
“ Block range of numbers ” a
M SELECT N
3 Mb N: Select the desired entry.
R To exit, press  MOFF N.
4 To edit a number:
MEDIT N a  Edit the number.  a M SAVE N
a  M OFF N
To erase a number:
M ERASE N a  M b N:  “Yes ” a  M SELECT N
a  M OFF N
Note:
R When editing, press the desired dial key to
add,  MCLEAR N to erase. Erasing all call block numbers
1
MM

ENUN#217
2 Mb N:  “Block a single number ” or
“ Block range of numbers ” a
M SELECT N
3 MMENU N a  M b N:  “Erase...

the same base unit. This allows the handset to
e
nd its wireless connection with the system.
1 MMENU N#131
R All handsets registered to the base unit
are displayed.
2 Mb N: Select the handset you want to
cancel.  a M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
36 For assistance, please visit http://www.panasonic.com/helpProgramming
TGE21x23x24x(en)_1122_ver031.pdf36   362013/11/22   14:22:28 

Using Caller ID service
I mportant:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details. Caller ID features
W

hen an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
–“Out of area ”:...

Using the Smart function key
W
hen  “Missed call ” is displayed and the  indicator flashes slowly, there are missed
c

alls.
Press  M N
 
in step 1 on “Viewing the caller
list and calling back”, page 37.
R “Missed Call ” must be set to “On” in
“Setting the Smart function key”, page 15.
R If the handset is placed on the base unit or
charger, you need to lift up the handset to
view the caller list after pressing  M N
.
R W

hen the unit has new messages *1
, new
voice mail messages, and missed calls, the...

Answering system
Available for:
K X-TGE230/KX-TGE240 series (page 3) The answering system can answer and record
c

alls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting  “Greeting only ” as the recording
time setting (page 44).
Important:
R Make sure the unit’s date and time setting
is correct (page 14). Memory capacity (including your
g

reeting message)
The total recording capacity is about 17...

Resetting to a pre-recorded greeting
m
essage
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1 MMENU N#304
2 MYES N a  M OFF N Playing back the greeting
m

essage
1 MMENU N#303
2 To exit, press  MOFF N. Listening to messages
Using the base unit
W

hen new messages have been recorded,
M N
 
on the base unit flashes.
Press  M N
 (PLAY).
R During playback,  M N
 on the base unit
lights.
R If new messages have been...