Panasonic Kx Tg7841 Operating Instructions Manual

							2
To make a 2nd call:
Dial the phone number.  a M Z N
To answer a 2nd call:
M Z N
R To hold the 2nd call, press  MHOLD N.
3 To hang up the 2nd call and return to the
1st call (cellular call), press  MZ N, then
press  MCELL 1 N or  MCELL 2 N.
For assistance, please visit http://www.panasonic.com/help 31Making/Answering Calls Using the Base Unit
TG78xx(en)_1210_ver101.pdf   312012/12/10   21:19:28 
						

							Shared phonebook
T he shared phonebook allows you to make
calls without having to dial manually. The base
unit and any handset registered to the base
unit can use the shared phonebook. You can
add 3,000 names and phone numbers to the
shared phonebook, and assign each
phonebook entry to the desired group
( “ Home ”,  “Cell 1 ”,  “Cell 2 ”).
Important:
R Only 1 person can access the shared
phonebook at a time.
R Caller ID subscribers can use group ringer
tone features (page 49).
R You can copy phonebook entries from a
Bluetooth cellular phone to the unit’s
shared phonebook (page 52). Adding entries
Handset
1 MF N   
a  M M
ENU N
2 Mb N:  “Add new entry ” a  M SELECT N
3 Enter the party’s name (16 characters
max.).  a M OK N
4 Enter the party’s phone number (24 digits
max.).  a M OK N
5 Mb N: Select the desired group.  a
M SELECT N 2 times
R To add other entries, repeat from step
3.
6 MOFF N Character table for entering names
W

hile entering characters, you can switch
between uppercase and lowercase by
pressing  * (A ®a). Key Character
1 & ’ ( ) H,
– . / 1
2 A B C 2
a b c 2 Key Character
3 D E F 3
d e f 3
4 G H I 4
g h i 4
5 J K L 5
j k l 5
6 M N O 6
m n o 6
7 P Q R S 7
p q r s 7
8 T U V 8
t u v 8
9 W X Y Z 9
w x y z 9
0 0
# # R
T
o enter another character that is located
on the same dial key, first press  ME N to
move the cursor to the next space.
R If you do not press any dial key within 5
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
R  in the above table represents a single
s

pace. Erasing the character or number
P

ress  MF N or  ME N.  a  M CLEAR N
R Press and hold  MCLEAR N to erase all
characters or numbers. Groups
G
 roups can help you find entries in the
phonebook quickly and easily. When adding
an entry to the phonebook, you can assign it
to one of 3 groups. You can search for
phonebook entries by group. The group ringer
tone feature is available for Caller ID
subscribers (page 49).
32 For assistance, please visit http://www.panasonic.com/helpShared Phonebook
TG78xx(en)_1210_ver101.pdf   322012/12/10   21:19:28    
						

							Finding and calling from a
p
honebook entry Scrolling through all entries
n
 U

sing a cellular line: Handset
1 M

FN  2
Mb N:
 Select the desired entry.
3 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
4 Mb N: Select the desired cellular phone.  a
M SELECT N Base unit
1 M N
2 Mb N:

 Select the desired entry.
3 Press  MCELL 1 N or  MCELL 2 N.
n  Using the landline: Handset / Base unit
1 P

roceed with the operation for your unit.
Handset:  M F N  Base unit:
 M N
2 Mb N:

 Select the desired entry.
3 Proceed with the operation for your unit.
Handset:  M N
B

ase unit:  M Z N Searching by first character
Handset / Base unit
1 P

roceed with the operation for your unit.
Handset:  M F N  Base unit:
 M N
2 P

ress the dial key ( 0 – 9  or  #) which
contains the character you are searching
for (page 32).
R Press the same dial key repeatedly to
display the first entry corresponding to
each character located on that dial key. R
I
f there is no entry corresponding to
the character you selected, the next
entry is displayed.
3 Mb N: Scroll through the phonebook if
necessary.
4 To make a cellular/landline call, continue
from step 3 for handset or step 3 for base
unit, “Scrolling through all entries”,
page 33. Searching by query
Y

ou can narrow down the search to enter the
first characters of a name. Handset / Base unit
1 P

roceed with the operation for your unit.
Handset:  M F N   
a  *
B

ase unit:  M N
 a  *
2 T
o search for the name, enter the first
characters (up to 4) in uppercase
(page 32).
R Characters cannot be entered in
lowercase.
R If there is no entry corresponding to
the characters you selected, the next
entry is displayed.
3 MOK N
4 Mb N: Scroll through the phonebook if
necessary.
5 To make a cellular/landline call, continue
from step 3 for handset or step 3 for base
unit, “Scrolling through all entries”,
page 33. Searching by group
Handset / Base unit
1 P

roceed with the operation for your unit.
Handset:  M F N  Base unit:
 M N
2 MG

ROUP N
3 Mb N: Select the group you want to search.
a  M SELECT N
R If you select  “All ” on the handset or
“ All groups ” on the base unit, the
unit ends the group search.
For assistance, please visit http://www.panasonic.com/help 33Shared Phonebook
TG78xx(en)_1210_ver101.pdf   332012/12/10   21:19:28            
						

							4
Mb N: Select the desired entry.
5 To make a cellular/landline call, continue
from step 3 for handset or step 3 for base
unit, “Scrolling through all entries”,
page 33. Editing entries
Handset
1 F

ind the desired entry (page 33).
2 MMENU N a  M b N:  “Edit ” a  M SELECT N
3 Edit the name if necessary (16 characters
max.; page 32).  a M OK N
4 Edit the phone number if necessary (24
digits max.).  a M OK N
5 Mb N: Select the desired group (page 32).
a  M SELECT N 2 times
6 MOFF N Erasing entries
Erasing an entry
Handset
1 F

ind the desired entry (page 33).
2 MMENU N a  M b N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N
4 MOFF N Base unit
1 F

ind the desired entry (page 33).
2 MERASE N a  M b N:  “Yes ” a  M SELECT N
3 MEXIT N Erasing all entries in a group
Handset
1 MF N   
a  M M
ENU N
2 Mb N:  “Erase all ” a  M SELECT N
3 Mb N: Select the desired group.  a
M SELECT N
4 Mb N:  “Yes ” a  M SELECT N 5
Mb N:
  “Yes ” a  M SELECT N
6 MOFF N Base unit
1 M N
 a  M E
RASE N
2 Mb N: Select the desired group.  a
M SELECT N
3 Mb N:  “Yes ” a  M SELECT N
4 Mb N:  “Yes ” a  M SELECT N Chain dial
T
 his feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually. Handset / Base unit
1 P

roceed with the operation for your unit.
During an outside call:
Handset:  M MENU N a  M b N:
“ Phonebook ” a  M SELECT N
Base unit:  M N
2 Mb N:

 Select the desired entry.
3 Press  MCALL N to dial the number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press  MD N (Pause) to add
pauses after the number and PIN as
necessary (page 22).
R If you have rotary/pulse service, you need
to press  * (TONE) before pressing
M MENU N on the handset or  M N
 
on the
base unit in step 1 to change the dialing
mode temporarily to tone. When adding
entries to the phonebook, we recommend
adding  * (TONE) to the beginning of
phone numbers you wish to chain dial
(page 32).
34 For assistance, please visit http://www.panasonic.com/helpShared Phonebook
TG78xx(en)_1210_ver101.pdf   342012/12/10   21:19:28     
						

							Speed dial
Y ou can assign 1 phone number to each of
the dial keys ( 1 to  9) on the handset. Adding phone numbers to speed
d

ial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Manual ” a  M SELECT N
3 Enter the party’s name (16 characters
max.).  a M OK N
4 Enter the party’s phone number (24
digits max.).  a M OK N
5 MSELECT N a  M OFF N
n From the shared phonebook:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Phonebook ” a  M SELECT N
3 Mb N: Select the desired entry.
4 MSAVE N a  M OFF N
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key. Editing an entry
1
P

ress and hold the desired speed dial key
( 1  to  9). a  M MENU N
2 Mb N:  “Edit ” a  M SELECT N
3 Edit the name if necessary (16 characters
max.; page 32).  a M OK N
4 Edit the phone number if necessary (24
digits max.).  a M OK N
5 MSELECT N a  M OFF N Erasing an entry
1
P

ress and hold the desired speed dial key
( 1  to  9). a  M MENU N
2 Mb N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N
4 MOFF N Viewing speed dial key
a

ssignments
You can see the speed dial key assignments
on the handset display.
Press and hold the desired speed dial key ( 1
to  9 ). Making a call using a speed dial
k

ey
n Using a cellular line:
1 Press and hold the desired speed dial
key ( 1 to  9).
2 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
3 Mb N: Select the desired cellular phone.
a  M SELECT N
n Using the landline:
1 Press and hold the desired speed dial
key ( 1 to  9).
2 M N
For assistance, please visit http://www.panasonic.com/help 35 Speed Dial
TG78xx(en)_1210_ver101.pdf   352012/12/10   21:19:28  
						

							Programmable settings
Y
ou can customize the unit by programming the following features.
To access the features, there are 2 methods. Handset / Base unit
n S

crolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the operation, press  MOFF N on the handset or  MEXIT N on the base unit.
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#110 .
For available code:
– Handset: see page 36.
– Base unit: see page 42.
2 Select the desired setting.  a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the operation, press  MOFF N on the handset or  MEXIT N on the base unit.
Note:
R In the following table, < > indicates the default settings.
R In the following table,   indicates the reference page number.
R D

isplay menu order and sub-menu may vary depending on your model. Display menu tree and direct command code table
n
 
Handset
Main menu:    “
P
honebook ”Operation Code
Viewing the phonebook entry.
#28033Main menu:   “
C
aller list ”Operation Code
Viewing the caller list.
#21349Main menu:   “
A
nswering device ”Sub-menu 1 Sub-menu 2 Settings Code
Play new msg.
(
m

sg. : message) –
–#3235836
For assistance, please visit http://www.panasonic.com/helpProgramming
TG78xx(en)_1210_ver101.pdf   362012/12/10   21:19:28        
						

							Sub-menu 1 Sub-menu 2 Settings Code
Play all msg.
––#32458
Erase all msg. * 1
– –#32558
Greeting Record greeting*
 1
–#30257
Check greeting –#30357
Pre-recorded *
 1
(Reset to pre-recorded
greeting) –
#30457
New message
a
 lert *1 Outgoing call
–
O
n/Off 1:
 On  0:   #338 59
Outgoing call
– N

otification to –
Outgoing call
– R

emote code 1:
 Activate
0:  
Base unit beep 1: O
n  0:   #339 59
Settings Ring count*
 1
2–7: 2-7 rings

0:  Toll saver #211
61
Recording time *
 1
1: 1 min
3:  
0:  Greeting
only *2 #305
62
Remote code *
 1
 #30660
Screen call 1:  0:  Off #310 56
Answer on *
 1
––#32756
Answer off *
 1
– –#32856Main menu:   “
V
.M. access ”*3
 (V.M.: Voice mail) Operation Code
Listening to voice mail messages.
#33064Main menu:   “
I
ntercom ”Operation Code
Paging the desired unit.
#27465 For assistance, please visit http://www.panasonic.com/help
37 Programming
TG78xx(en)_1210_ver101.pdf   372012/12/10   21:19:28      
						

							Main menu:   “
Bluetooth ”Sub-menu 1 Sub-menu 2 Settings Code
Link to cell
–
1

: Add new
device *4
(for CELL 1)
– 2: Add new
device *4
(for CELL 2) Connect
* 1
/
Disconnect *1 –
#6251* 5
19
#6252 *
 6
Ringer volume
– H

andset 0–6: 
Off –6 
#6281* 5
22
#6282 *
 6
Ringer volume
– B

ase unit *10–6: 
Off –6 
#G 6281 *5
29
# G 6
282 *6
Ringer tone *
 7, *8
*5
< Tone 4 >*6 #6291
* 5
–
#6292 *
 6
Select unit to
r
 ing *1 1–6:
 Handset 1-6
G : < All > #6271
* 5
18
#6272 *
 6
Ring as cell
(
 limited) *1 1:
 < On (with
Talking CID) >
2:  On (without
Talking CID)
0:  Off #6141
* 5
18
#6142 *
 6
Pair –#6241*
 5
17
#6242 *
 6
Unpair –#6111*
 5
17
#6112 *
 6
Phonebook
t
 ransfer –
–#618 52
Headset Add new device*
 4
–#621 54
Connect *
 1
/
Disconnect *1 –
#622 54
Pair –#621 54
Unpair –#612 5438
For assistance, please visit http://www.panasonic.com/helpProgramming
TG78xx(en)_1210_ver101.pdf   382012/12/10   21:19:28   
						

							Sub-menu 1 Sub-menu 2 Settings Code
Settings
Auto connect* 1
1: < 1 min >
2:  3 min
3:  5 min
4:  10 min
0:  Off #632
18
Cell area code *
 1
–#633 20
Cell line only
m
 ode *1 1:
 On   0:   #157 19
Cell line select
– H

andset 1:
 Cellphone 1 *4
2:  Cellphone 2 *4
0:   #634
20
Cell line select
– B

ase unit *11:
 < Cellphone 1 >*4
2:  Cellphone 2 *4#
G 634
Set PIN *
 1
 #61920Main menu:   “
S
et date & time ”Sub-menu 1 Sub-menu 2 Settings Code
Date and time
*
 1
– –#10116
Alarm –1: O
nce
2:  Daily
0:   #720
44
Time a
djustment *1, *9
–1: < Caller ID auto >
0:  Manual #226
–Main menu:   “
I
nitial setting ”Sub-menu 1 Sub-menu 2 Settings Code
Ringer setting
Ringer volume0–6: O
ff –6  #16022
Ringer t
one *7, *8, *10
(Handset) <
Tone 1 > #161–
Interrupt tone
– H

andset *11 1:
 < On>  0:  Off #20125
Interrupt tone
– B

ase unit *1, *111:
 < On>  0:  Off #G 201 30
Silent mode
– O

n/Off 1:
 On  0:   #23844
Silent mode
– S

tart/End <
11:00 PM/06:00
AM > #237
45 For assistance, please visit http://www.panasonic.com/help
39 Programming
TG78xx(en)_1210_ver101.pdf   392012/12/10   21:19:28      
						

							Sub-menu 1 Sub-menu 2 Settings Code
Set date & time
Date and time* 1
–#10116
Alarm 1: O
nce
2:  Daily
0:   #720
44
Time
a
 djustment *1, *91:
 < Caller ID auto >
0:  Manual #226
–
Talking Caller ID Handset 1:  0:  Off #16248
Base unit *
 1
1: On  0:   #G 162
Handset name ––#10445
Key detector
s
 etting *12
– 1: Add new
device
(for  Detector1 )*13
– 2: Add new
device
(for  Detector2 )
– 3: Add new
device
(for  Detector3 )
– 4: Add new
device
(for  Detector4 )Change name
* 1
Detector1 #6561–
Detector2 *
 14
#6562* 15
Detector3 *
 14
#6563* 15
Detector4 *
 14
#6564* 15
Registration –#6571–
#6572 *
 15
#6573 *
 15
#6574 *
 15
Deregistration –#6581–
#6582 *
 15
#6583 *
 15
#6584 *
 15
Call block *
 1
– –#21745
First ring *
 1
1:  0:  Off #17346
Block w/o num *
 1, *2
(Block calls without
phone number) 1: 
 On  0:   #24046
Speed dial ––#26135
Voice mail Store VM
a

ccess# *1
( VM : Voice mail) –
#33163
VM tone detect *
 1
1:  0:  Off #33263
LCD contrast
(
 Display contrast) –
1–6: Level 1–6  #145–
Key tone *
 16
–1:  0:  Off #165–
Caller ID edit
(
 Caller ID number auto
edit) –
1:  0:  Off #2145040
For assistance, please visit http://www.panasonic.com/helpProgramming
TG78xx(en)_1210_ver101.pdf   402012/12/10   21:19:28