Panasonic Kx Tg7841 Operating Instructions Manual

2
To make a 2nd call:
Dial the phone number.  a M Z N
To answer a 2nd call:
M Z N
R To hold the 2nd call, press  MHOLD N.
3 To hang up the 2nd call and return to the
1st call (cellular call), press  MZ N, then
press  MCELL 1 N or  MCELL 2 N.
For assistance, please visit http://www.panasonic.com/help 31Making/Answering Calls Using the Base Unit
TG78xx(en)_1210_ver101.pdf   312012/12/10   21:19:28 

Shared phonebook
T he shared phonebook allows you to make
calls without having to dial manually. The base
unit and any handset registered to the base
unit can use the shared phonebook. You can
add 3,000 names and phone numbers to the
shared phonebook, and assign each
phonebook entry to the desired group
( “ Home ”,  “Cell 1 ”,  “Cell 2 ”).
Important:
R Only 1 person can access the shared
phonebook at a time.
R Caller ID subscribers can use group ringer
tone features (page 49).
R You can copy phonebook...

Finding and calling from a
p
honebook entry Scrolling through all entries
n
 U

sing a cellular line: Handset
1 M

FN  2
Mb N:
 Select the desired entry.
3 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
4 Mb N: Select the desired cellular phone.  a
M SELECT N Base unit
1 M N
2 Mb N:

 Select the desired entry.
3 Press  MCELL 1 N or  MCELL 2 N.
n  Using the landline: Handset / Base unit
1 P

roceed with the operation...

4
Mb N: Select the desired entry.
5 To make a cellular/landline call, continue
from step 3 for handset or step 3 for base
unit, “Scrolling through all entries”,
page 33. Editing entries
Handset
1 F

ind the desired entry (page 33).
2 MMENU N a  M b N:  “Edit ” a  M SELECT N
3 Edit the name if necessary (16 characters
max.; page 32).  a M OK N
4 Edit the phone number if necessary (24
digits max.).  a M OK N
5 Mb N: Select the desired group (page 32).
a  M SELECT N 2 times
6 MOFF N Erasing entries
Erasing...

Speed dial
Y ou can assign 1 phone number to each of
the dial keys ( 1 to  9) on the handset. Adding phone numbers to speed
d

ial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Manual ” a  M SELECT N
3 Enter the party’s name (16 characters
max.).  a M OK N
4 Enter the party’s phone number (24
digits max.).  a M OK N
5 MSELECT N a  M OFF N
n From the shared phonebook:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:...

Programmable settings
Y
ou can customize the unit by programming the following features.
To access the features, there are 2 methods. Handset / Base unit
n S

crolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
R This step may vary depending on the feature being programmed.
R To exit the...

Sub-menu 1 Sub-menu 2 Settings Code
Play all msg.
––#32458
Erase all msg. * 1
– –#32558
Greeting Record greeting*
 1
–#30257
Check greeting –#30357
Pre-recorded *
 1
(Reset to pre-recorded
greeting) –
#30457
New message
a
 lert *1 Outgoing call
–
O
n/Off 1:
 On  0:   #338 59
Outgoing call
– N

otification to –
Outgoing call
– R

emote code 1:
 Activate
0:  
Base unit beep 1: O
n  0:   #339 59
Settings Ring count*
 1
2–7: 2-7 rings

0:  Toll saver #211
61
Recording time *
 1
1: 1 min
3:  
0:  Greeting...

Main menu:   “
Bluetooth ”Sub-menu 1 Sub-menu 2 Settings Code
Link to cell
–
1

: Add new
device *4
(for CELL 1)
– 2: Add new
device *4
(for CELL 2) Connect
* 1
/
Disconnect *1 –
#6251* 5
19
#6252 *
 6
Ringer volume
– H

andset 0–6: 
Off –6 
#6281* 5
22
#6282 *
 6
Ringer volume
– B

ase unit *10–6: 
Off –6 
#G 6281 *5
29
# G 6
282 *6
Ringer tone *
 7, *8
*5
< Tone 4 >*6 #6291
* 5
–
#6292 *
 6
Select unit to
r
 ing *1 1–6:
 Handset 1-6
G : < All > #6271
* 5
18
#6272 *
 6
Ring as cell
(
 limited) *1 1:
 <...

Sub-menu 1 Sub-menu 2 Settings Code
Settings
Auto connect* 1
1: < 1 min >
2:  3 min
3:  5 min
4:  10 min
0:  Off #632
18
Cell area code *
 1
–#633 20
Cell line only
m
 ode *1 1:
 On   0:   #157 19
Cell line select
– H

andset 1:
 Cellphone 1 *4
2:  Cellphone 2 *4
0:   #634
20
Cell line select
– B

ase unit *11:
 < Cellphone 1 >*4
2:  Cellphone 2 *4#
G 634
Set PIN *
 1
 #61920Main menu:   “
S
et date & time ”Sub-menu 1 Sub-menu 2 Settings Code
Date and time
*
 1
– –#10116
Alarm –1: O
nce
2:  Daily
0:...

Sub-menu 1 Sub-menu 2 Settings Code
Set date & time
Date and time* 1
–#10116
Alarm 1: O
nce
2:  Daily
0:   #720
44
Time
a
 djustment *1, *91:
 < Caller ID auto >
0:  Manual #226
–
Talking Caller ID Handset 1:  0:  Off #16248
Base unit *
 1
1: On  0:   #G 162
Handset name ––#10445
Key detector
s
 etting *12
– 1: Add new
device
(for  Detector1 )*13
– 2: Add new
device
(for  Detector2 )
– 3: Add new
device
(for  Detector3 )
– 4: Add new
device
(for  Detector4 )Change name
* 1
Detector1 #6561–
Detector2 *...