Panasonic Kx Tg7841 Operating Instructions Manual

Making cellular calls
I mportant:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the CELL
1 or CELL 2 indicator lights up (page 15).
1 Lift the handset and dial the phone
number.
RTo correct a digit, press  MCLEAR N.
2 MCELL N
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Go to step 4.
3 Mb N: Select the desired cellular phone.  a
M SELECT N
4 When you finish talking, press  MOFF N or
place...

3
M N
Storing a number to the phonebook
P
hone numbers of up to 24 digits can be
stored in the phonebook.
n When a cellular phone is paired:
1 ME N REDIAL
2 Mb N: Select the desired phone number.
a  M MENU N
3 Mb N:  “Save ” a  M SELECT N
4 To store the name, continue from step
3, “Editing entries”, page 34.
n When a cellular phone is not paired:
1 ME N REDIAL
2 Mb N: Select the desired phone number.
a  M SAVE N
3 To store the name, continue from step
3, “Editing entries”, page 34. Pause (for PBX/long...

*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls (page 20).
R The base unit user can take the call by
pressing  MCELL 1 N or  MCELL 2 N.
To release hold on the landline:
Press  M N
.
R A

nother handset user can take the call
by pressing  M N
.
R T

he base unit user can take the call by
pressing  MZ N.
Note:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is...

Handset noise reduction
T his feature allows you to hear the voice of
the person you are talking to clearly, by
reducing the surrounding noise coming from
the other party’s telephone.
Press  MNOISE REDUCTION N to turn on/off
while talking.
Note:
R When this feature is turned on,   is
d

isplayed while talking.
R Depending on the environment where this
handset is being used, this feature may not
be effective.
R This feature is not available using the
speakerphone.
R When both the  “Equalizer ” setting...

2
Mb N: Select the desired cellular phone.  a
M SELECT N
R The call is transferred to the handset. Using the other line during a
c

onversation
You can handle a cellular call and a landline
call at the same time. When another call is
being received during a conversation, the
interrupt tone sounds (page 39), and the 2nd
caller’s information is displayed if you
subscribe to Caller ID (page 48). You can
answer the 2nd call while holding the 1st call. Making/answering a cellular call
d

uring a conversation...

Panasonic Ni-MH battery
p
erformance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power back-up mode: 1.5 hours max.
– Continuous use of the handset other than a handset in power back-up mode: 2 hours
max.
– Not in use in power back-up mode: 2 hours max.
Note:
R Actual battery performance depends on
usage and ambient environment. Making calls during a...

n
When 2 or more handsets are registered:
When the unit rings, use a handset which is
not supplying power to the base unit. For
the operation, please see “Answering calls”,
page 22.
R Do not use or lift the handset which is
placed on the base unit during power
back-up mode.
Note:
R During a call with the handset placed on the
base unit (power back-up mode), the call
may be disconnected if you touch the
handset. In such case, try to call back.
R The range of the base unit is limited during
a power...

Making cellular calls
1 D
ial the phone number.
2 Press  MCELL 1 N or  MCELL 2 N.
3 When the other party answers, speak into
the microphone.
RSpeak alternately with the other party.
4 When you finish talking, press  MZ N.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
With the call sharing mode on (page 30),
press  MCELL N on the handset.  a M b N:
Select the desired cellular phone.  a
M SELECT N a  Press  MZ...

Answering calls
W hen a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
1 Press  MZ N when the unit rings.
R You can also answer the cellular call
by pressing  MCELL 1 N or  MCELL 2 N.
2 Speak into the microphone.
3 When you finish talking, press  MZ N. Adjusting the base unit ringer volume
n W

hile the base unit is ringing for an
incoming call:
Press  MD N or  MC N...

If you subscribe to both Caller ID and Call
W
aiting with Caller ID services,  the 2nd
caller’s information is displayed after you hear
the call waiting tone on the base unit.
1 Press  MCALL WAIT N to answer the 2nd
call.
2 To switch between calls, press  MCALL
WAIT N.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area. Temporary tone dialing for
l
 andline calls (for rotary/pulse
service users)
You can temporarily switch the dialing...