Panasonic Kx Tg7841 Operating Instructions Manual

2
After the greeting message starts, enter
your remote access code.
3 Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 61).
4 When finished, hang up. Voice guidance
n
W

hen the English voice guidance is
selected
During remote operation, the unit’s voice
guidance starts and prompts you to press
1  to perform a specific operation, or press
2  to listen to more available operations.
n When the Spanish voice guidance is
selected
To start the voice guidance,...

For voice mail service subscribers
I f you subscribe to a flat-rate service package
that includes Caller ID, call waiting, voice mail,
and unlimited local/regional/long distance
calls, please note the following:
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 56).
R To use this unit’s answering system rather
than the voice mail service provided by
your service provider/telephone company,...

Voice mail service for
l andline
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. Please contact
your service provider/telephone company for
details of this service.
Important:
R To...

Listening to voice mail messages
T
he unit lets you know that you have new
voice mail messages in the following way:
– “New Voice Mail ” is displayed if
message indication service is available. Handset
1 MM

ENUN#330
R The speakerphone turns on.
2 Follow the pre-recorded instructions.
3 When finished, press  MOFF N.
Note:
R In step 1, you can also press  MVM N*1
 to
listen to new voice messages.
*1 MVM N is displayed if a cellular phone is
not paired and there are new messages
in the voice mail. Base...

Intercom
I ntercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones.
– To answer the call with the handset,
press  MOFF N, then press  M N
.
–

To answer the call with the base unit, press  MZ N 2 times. Making an intercom call
Handset
1 MM

ENUN a  M b N:  “Intercom ” a
M SELECT N
2 Mb N: Select the desired unit.  a M SELECT N
R To...

5
To complete the transfer:
Press  MOFF N.
R The outside call is being routed to the
destination unit.
To establish a conference call:
M MENU N a  M b N:  “Conf. ” a  M SELECT N
R To leave the conference, press  MOFF N.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENU N a  M b N:  “Hold ” a
M SELECT N
To resume the conference:  MMENU N
a  M b N:  “Conf. ” a  M SELECT N
R To cancel the conference:  MMENU N a
M b N:  “Stop conference ” a
M SELECT N
You can...

Wall mounting
T he base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
R Model shown is KX-TG7841 series. Base unit
1
T

o remove the wall mounting adaptor,
push down the release levers ( A).
Remove the adaptor ( B). 2
A 
Turn the adaptor so that the words
“UP WALL” are facing up.
B Tuck the telephone line cord inside the
wall mounting adaptor.
C  Connect the AC...

Error messages
Display message Cause/solution
Base no power
o r
No link. Re-connect base
AC adaptor.
or
No link. R
The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been canceled.
Re-register the handset (page 47).
R When  “No link. ” is displayed during a power
failure, place a handset on the base unit to supply
power to the...

Display message Cause/solution
Use rechargeable battery. RA wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 7. Troubleshooting
I
 f you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,
and then insert the batteries into the handset again. General use
Problem Cause/solution
The handset...

Problem Cause/solution
I cannot connect a cellular
p hone to the base unit. R
Confirm that your cellular phone is turned on.
RConfirm that your cellular phone is within base unit range
(page 14).
R Depending on the state of the wireless environment, such
as the presence of any electrical interference, there may
be a delay even if the auto connection feature is turned
on. You can connect to the base unit manually (page 19).
R The cellular phone has not been paired to the base unit.
Pair the cellular phone...