Panasonic Kx Tg6700 Operating Instructions Manual

Base Unit Speed Dialer
For assistance, please visit http://www.panasonic.com/phonehelp31
Base unit speed dialer
You can assign one phone number to each 
of the 10 dial keys ({0 } – { 9}) on the base 
unit.
Adding phone numbers to the 
speed dialer
Important:
L Before adding phone numbers, make 
sure the base unit is not being used.
1{PROGRAM }
2Enter the phone number (max. 32 
digits).
LIf a pause is required for dialing, 
press  {PAUSE } where needed.
L If you misdial, press  {STOP } and 
repeat from...

Caller ID Service
32For assistance, please visit http://www.panasonic.com/phonehelp
Using Caller ID service
This unit is Caller ID compatible. To use 
Caller ID features, you must subscribe to 
Caller ID service of your telephone service 
provider.
Caller ID features
When an outside call is being received, the 
calling party’s name and telephone 
number are displayed.
Caller information for the last 50 different 
callers is logged in the caller list by the 
most recent call to the oldest.
LGenerally...

Caller ID Service
For assistance, please visit http://www.panasonic.com/phonehelp33
Caller list
Viewing the caller list and 
calling back
1{^} or {V}  i  { CID }
2Press  {V} to search from the most 
recent call, or  {^} to search from the 
oldest call.
3{C}
Note:
L If the indicated line is already being used 
or you want to select the other line, 
press  {CALL } in step 3 then select the 
desired line by pressing  {LINE1 } or 
{ LINE2 }.
Displayed symbols
L m and  n indicate which line the caller...

Caller ID Service
34For assistance, please visit http://www.panasonic.com/phonehelp
Caller ID number auto edit 
feature
Once you call back an edited number, the 
unit will remember the Area Code and 
Format of the Edited Number. Next time 
when someone calls from the same Area 
Code, caller information will be customized 
by the unit as follows: 
– when the call is being received, the 
Caller ID number will be displayed in the 
same Format as the Edited Number.
– after the call is ended, the telephone...

Programming
For assistance, please visit http://www.panasonic.com/phonehelp35
Programmable settings
You can customize the unit by programming th e following features using the handset. To 
access the features, there are 2 methods: 
– scrolling through the display menus (page 35) 
– using the direct commands (page 37)
L The direct command method is mainly used in these operating instructions.
Programming by scrolling through the display menus
1{MENU}
2Press  {^} or {V}  to select the desired menu.  i...

Programming
36For assistance, please visit http://www.panasonic.com/phonehelp
*1 If you program these settings using one of  the handsets, you do not need to program 
the same item using another handset.
Initial setting
 
Set answering Ring count
*147
Recording time
*147
Remote code
*148
Recording mode
*148
Message alert –48
LCD contrast ––
Key tone ––
Auto talk –23
Room monitor –53
Caller ID edit –34
Set tel line Line select 20
Set dial mode
*119
Set flash time
*1–
Set line mode
*1–
Set base unit Ringer...

Programming
For assistance, please visit http://www.panasonic.com/phonehelp37
Programming using the direct commands
1{MENU}
2Enter the desired feature code.
3Enter the desired setting code.
L This step may vary depending on the feature being programmed.
4{SAVE}  i  { OFF }
Note:
L In the following table, < > indicates the default setting.
L If you make a mistake or enter the wrong code, press  {OFF }, then start again from step 
1.
FeatureFeature codeSetting codePage
Auto talk
*2*3{ 0 }{ 3}{ 1}:  On  { 0...

Programming
38For assistance, please visit http://www.panasonic.com/phonehelp
Line select
(Handset) {
0 }{ 5}{ 5}{ 1}:  Line1  {2 }:  Line2  
{ 0 }: < Auto > 20
Line select
*1
(Base unit) {
0 }{*}{ 5} 20
Message alert {0 }{#} { 1}:  On  { 0 }: < Off>4 8
Message playback {2 } –42, 43
Phonebook {*}–28
Recording mode
*1{ 0 }{ 6}{ 4}{ 1}: < Standard 
recording 60min >
{ 2 }:  Enhanced recording 
30min 48
Recording time
*1Line1 {0 }{ 6}{ 2}{ 1}{ 1}:  1min  { 2 }:  2min
{ 3 }: < 3min >
{ 0 }:  Greeting only...

Programming
For assistance, please visit http://www.panasonic.com/phonehelp39
*1 If you program these settings using one of  the handsets, you do not need to program 
the same item using another handset.
*2 If you set the line selection mode from “ Auto” to “Line1” or “Line2 ” (page 20), the 
auto talk feature will function for that line only . If the other line receives a call, the auto 
talk feature does not function.
*3 If you subscribe to Caller ID service and want to view the caller’s information...

Answering System
40For assistance, please visit http://www.panasonic.com/phonehelp
Answering system
Important:
LOnly 1 person can access the answering 
system at a time.
L When callers leave messages, the unit 
records the day and time of each 
message. Make sure the date and time 
have been correctly set (page 19).
Memory capacity
The total recording capacity (including 
your greeting message, caller messages, 
and voice memos) is about 60 minutes.
A maximum of 99 messages can be 
recorded.
LIf the...