Panasonic Kx Tg6311 Operating Instructions Manual

Preparation
11For assistance, please visit http://www.panasonic.com/help
Handset
ASpeaker
B{MENU}
CSoft keys
D{C} (TALK)
E{s} (SP-PHONE: Speakerphone)
FDial keypad 
({*}: TONE)
G{FLASH} {CALL WAIT}
HCharge indicator
Ringer indicator
Message indicator
IReceiver
JDisplay
K{OFF}
LNavigator key ({^}/{V}/{})
? (Volume: {^}/{V})
M{PAUSE} {REDIAL}
N{HOLD} {INTERCOM}
OMicrophone
PCharge contacts
Using the navigator key
The handset navigator key can be used 
to navigate through menus and to select 
items shown on...

Preparation
12For assistance, please visit http://www.panasonic.com/help
Connections
Connect the AC adaptor cord (A) by 
pressing the plug firmly (B). Connect 
the telephone line cord until it clicks into 
the base unit and telephone line jack 
(C).
Base unit
LUse only the supplied Panasonic AC 
adaptor PQLV207.
LUse only the supplied telephone line 
cord. Using another telephone line 
cord may not allow the unit to work 
properly.
Charger
LUse only the supplied Panasonic AC 
adaptor PQLV209.Note:
LThe...

Preparation
13For assistance, please visit http://www.panasonic.com/help
Battery installation and 
replacement
Important:
LUse the supplied rechargeable 
batteries (Part No. HHR-65AAABU).
LWhen installing the batteries:
– Wipe the battery ends (S, T) with 
a dry cloth.
– Avoid touching the battery ends 
(S, T) or the unit contacts.
– Ensure correct polarites (S, T).
LWhen replacing the batteries:
– USE ONLY rechargeable Ni-MH 
batteries AAA (R03) size.
– Do NOT use 
Alkaline/Manganese/Ni-Cd 
batteries.
–...

Preparation
14For assistance, please visit http://www.panasonic.com/help
Battery charge
Place the handset on the base unit or 
charger for about 7 hours before 
initial use.
LWhile charging, “Charging” is 
displayed and the charge indicator on 
the handset lights up. When the 
batteries are fully charged, “Charge 
completed” is displayed.
*1 KX-TG6312/KX-TG6313/
KX-TG6322/KX-TG6323/
KX-TG6324
Note:
LIt is normal for the handset to feel 
warm during charging.
LIf you want to use the handset 
immediately,...

Preparation
15For assistance, please visit http://www.panasonic.com/help
LThe battery level may not be 
displayed correctly after you replace 
the batteries. In this case, place the 
handset on the base unit or charger 
and let it charge for at least 7 hours.
Symbols used in these 
operating instructions
Setting up the unit 
before use
Display language
You can select either “English” or 
“Español” as the display language. 
The default setting is “English”.
1{MENU} i {#}{1}{1}{0}
2{V}/{^}: Select the...

Preparation
16For assistance, please visit http://www.panasonic.com/help
Dialing mode
If you cannot make calls, change this 
setting according to your telephone line 
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1{MENU} i {#}{1}{2}{0}
2{V}/{^}: Select the desired setting.
3{Save} i {OFF}
Date and time
1
{MENU} i {#}{1}{0}{1}
2Enter the current month, date, and 
year by selecting 2 digits for each.
Example:July 15, 2008
{0}{7} {1}{5}...

Making/Answering Calls
17For assistance, please visit http://www.panasonic.com/help
Making calls
1Lift the handset and dial the phone 
number.
LTo correct a digit, press {Clear}.
2Press {C} or {Call}.
3When you finish talking, press 
{OFF} or place the handset on the 
base unit or charger.
Using the speakerphone
1Dial the phone number, and press 
{s}.
LSpeak alternately with the other 
party.
2When you finish talking, press 
{OFF}.
Note:
LFor best performance, use the 
speakerphone in a quiet...

Making/Answering Calls
18For assistance, please visit http://www.panasonic.com/help
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the 
desired volume while the handset is 
ringing for an incoming call.
Note:
LYou can also program the handset 
ringer volume beforehand (page 24).
Temporary handset ringer off
While the handset is ringing for a call, 
you can turn the ringer off temporarily by 
pressing {OFF}.
Adjusting the base unit ringer volume
Press {^} or {V} repeatedly to...

Making/Answering Calls
19For assistance, please visit http://www.panasonic.com/help
2To switch between calls, press 
{CALL WAIT}.
Note:
LPlease contact your service 
provider/telephone company for 
details and availability of this service 
in your area.
Temporary tone dialing (for 
rotary/pulse service users)
You can temporarily switch the dialing 
mode to tone when you need to access 
touch-tone services (for example, 
answering services, telephone banking 
services, etc.).
Press {*} (TONE) before...

Shared Phonebook
20For assistance, please visit http://www.panasonic.com/help
Shared phonebook
The shared phonebook allows you to 
make calls without having to dial 
manually. Any handset registered to the 
base unit can use the shared 
phonebook. You can add 50 names and 
phone numbers to the shared 
phonebook.
Important:
LOnly 1 person can access the shared 
phonebook at a time.
Adding entries
1
{Phonebook}
2{Add}
3Enter the party’s name (16 
characters max.). i {Next}
4Enter the party’s phone number...