Panasonic Kx Tg5671 Operating Instructions Manual

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp11
Setting up the base unit
Connecting the AC adaptor and 
telephone line cord
Connect the telephone line cord until it 
clicks into the base unit (A) and telephone 
line jack (B). Connect the AC adaptor cord 
by pressing the plug firmly (C).
LUse only the included Panasonic AC 
adaptor PQLV1 or PQLV256.
Note:
LThe AC adaptor must remain connected 
at all times. (It is normal for the adaptor 
to feel warm during use.)
LThe AC...

Preparation
12For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the handset
Connecting the charger
LUse only the included Panasonic AC 
adaptor KX-TCA1 or PQLV256.
Battery installation/replacement
1Press the notch of the handset cover 
firmly, and slide it in the direction of the 
arrow. 
LIf necessary, remove the old battery.
2Insert the battery (A), and press it 
down until it snaps into position (B). 
Then close the handset cover.
Important:
LUse only the rechargeable...

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp13
Attention:
A nickel metal hydride battery that is 
recyclable powers the product you have 
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to 
recycle this battery.
Battery charge
Place the handset on the base unit or 
charger for 7 hours before initial use.
While charging, “Charging” is displayed 
and the CHARGE indicator on the base 
unit lights. When the battery is fully 
charged, “Charge...

Preparation
14For assistance, please visit http://www.panasonic.com/phonehelp
Battery level
Note:
LWhen the battery needs to be charged, 
the handset beeps intermittently while it 
is in use.Panasonic battery performance
Note:
LBattery operating time may be 
shortened over time depending on 
usage conditions and surrounding 
temperature.
LBattery power is consumed whenever 
the handset is off the base unit or 
charger, even when the handset is not in 
use. Hence the longer you leave the 
handset off the...

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp15
Controls
Base unit
ADisplay
B{ERASE}
C{ANSWER ON} 
ANSWER ON indicator
DNavigator key ({^} {V} {})
E{MEMO}
FMESSAGE indicator
G{MESSAGE}
H{STOP}
I{GREETING REC} (Recording)
J{GREETING CHECK}
KAntenna
LSpeaker
MCharge contactsN{PROGRAM} {AUTO}
O{MUTE}
P{CALL WAIT} {FLASH}
Q{REDIAL} {PAUSE}
RCHARGE indicator
SIN USE indicator
T{*} (TONE)
UMIC (Microphone)
V{1} {2} {3} (extension number)
W{SP-PHONE} (Speakerphone)
SP-PHONE...

Preparation
16For assistance, please visit http://www.panasonic.com/phonehelp
Handset
ASpeaker
BSoft keys
CHeadset jack
D{C} (TALK)
ENavigator key ({^} {V} {})
F{s} (SP-PHONE)
G{*} (TONE)
H{FLASH} {CALL WAIT}
IMicrophone
JCharge contacts
KRinger indicator
Message indicator
LReceiver
MDisplayN{MENU}
O{OFF}
P{PAUSE} {REDIAL}
Q{HOLD} {INTERCOM}
Note:
LSome operations not mentioned above 
are displayed as soft key selections 
during operation (page 17).
Example: {Mute}
Using the navigator key
The handset...

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp17
Handset soft keys
The handset features 2 soft keys. By 
pressing a soft key, you can select the 
feature shown directly above it on the 
display.
{Select}, {Save}, {OK} and additional 
other functions are assigned to soft keys, 
pay attention to soft keys to find functions 
you need during handset operation.
Note:
LIn these operating instructions, soft key 
names are written inside brackets, the 
same way as other unit keys....

Preparation
18For assistance, please visit http://www.panasonic.com/phonehelp
Setting the unit before 
use
Display language
The default setting is “English”.
1{MENU} i {0}{8}
2Select the desired setting.
3Press the right soft key to save. i 
{OFF}
Dialing mode
If you cannot make calls, change this 
setting depending on your telephone line 
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
1{MENU} i {0}{5}{1}
2Select the desired setting. i...

Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp19
Making calls
Using the handset
1Lift the handset and dial the phone 
number.
LTo correct a digit, press {Clear}.
2Press {C} or {Call}.
3When you finish talking, press {OFF} or 
place the handset on the base unit or 
charger.
Note:
L“Line in use” is displayed when 
someone is talking on another handset 
(KX-TG5672/KX-TG5673) or another 
phone.
Using the speakerphone
1Lift the handset, dial the phone number, 
and press...

Making/Answering Calls
20For assistance, please visit http://www.panasonic.com/phonehelp
Using the base unit
1{SP-PHONE}
2Dial the phone number.
3When the other party answers, speak 
into the MIC.
LSpeak alternately with the other party.
4When you finish talking, press {SP-
PHONE}.
Note:
LUse the speakerphone in a quiet 
environment.
LWhile on a call, you can switch from the 
base unit to the handset: 
– Press {C} on the handset, then 
press {SP-PHONE} on the base unit.
– If the handset is on the base...