Panasonic Kx Tg5671 Operating Instructions Manual

Answering System
For assistance, please visit http://www.panasonic.com/phonehelp41
Answering system 
settings
Remote code
A remote code must be entered when 
operating the answering system remotely. 
This code prevents unauthorized parties 
from listening to your messages remotely.
The default setting is “11”.
1{MENU} i {0}{6}{3}
2Enter the desired 2-digit remote code. 
i {Save} i {OFF}
Ring count
You can change the number of times the 
phone rings before the unit answers calls.
The default setting is...

Answering System
42For assistance, please visit http://www.panasonic.com/phonehelp
Caller’s recording time
You can change the maximum message 
recording time allotted to each caller.
The default setting is “3min”.
“Greeting only”: The unit plays the 
greeting message but does not record 
caller messages.
1{MENU} i {0}{6}{2}
2Select the desired setting. i {Save} 
i {OFF}
Note:
LIf the message memory becomes full, 
the unit automatically switches to the 
“Greeting only” mode and no new 
messages are...

Multi-unit Operation
For assistance, please visit http://www.panasonic.com/phonehelp43
Intercom
Intercom calls can be made:
– between the handset and base unit
– between handsets (KX-TG5672/5673)
Note: 
LIf you receive a phone call while talking 
on the intercom, you hear 2 tones. To 
answer the call with the handset, press 
{OFF}, then press {C}. To answer the 
call with the base unit, press {SP-
PHONE} 2 times.
LYou can locate a misplaced handset by 
paging it (handset locator).
KX-TG5671
Making an...

Multi-unit Operation
44For assistance, please visit http://www.panasonic.com/phonehelp
1{INTERCOM}
2Press {1}, {2}, or {3}.
LThe destination unit beeps for 1 
minute.
LTo stop paging, press {SP-PHONE} 
or {INTERCOM}.
3To end the intercom call, press {SP-
PHONE}.
Answering an intercom call
1Press {C} to answer the page.
2To end the intercom call, press {OFF}.
1Press {SP-PHONE} or {INTERCOM} 
to answer the page.
2To end the intercom call, press {SP-
PHONE}.
Note for handset and base unit:
LWhen the ringer...

Multi-unit Operation
For assistance, please visit http://www.panasonic.com/phonehelp45
KX-TG5671
1During an outside call, press 
{INTERCOM} to put the call on hold.
2Wait for the paged party to answer.
LIf the paged party does not answer, 
press {INTERCOM} to return to the 
outside call.
3To complete the transfer, press {SP-
PHONE}.
LThe outside call is being routed to the 
handset.
To establish a conference call, press 
{CONF}.
LTo leave the conference, press {SP-
PHONE}. The other parties can 
continue...

Multi-unit Operation
46For assistance, please visit http://www.panasonic.com/phonehelp
Registering a handset
The included handset and base unit are 
preregistered. If for some reason the 
handset is not registered to the base unit, 
register the handset. Lift the handset from 
the base unit or charger before registering.
KX-TG5671
1Handset:
{MENU} i {0}{0}
2Base unit:
Press and hold {INTERCOM} until the 
CHARGE indicator flashes.
LAfter the CHARGE indicator starts 
flashing, the rest of the procedure...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp47
Wall mounting
Base unit
1Tuck the telephone line cord inside the 
wall mounting adaptor (A). 
Connect the telephone line cord (B).
2Insert the hooks on the wall mounting 
adaptor into the holes (1) and (2) on 
the base unit.
3Adjust the adaptor to hold the base unit, 
then push it in the direction of the arrow 
until it clicks into place.
A
B
1 2 12
TG5671_72_73(e).book  Page 47  Wednesday, January 11, 2006  7:03 PM 

Useful Information
48For assistance, please visit http://www.panasonic.com/phonehelp
4Connect the telephone line cord. Mount 
the unit by inserting the mounting pins 
into the round openings on the adaptor 
(for pin 2, use round cut out at the 
bottom of the adaptor if you are using 
the 4 inches phone plate), then sliding 
the unit down to secure it.
Connect the AC adaptor to power outlet 
(page 11).
LThere are two common types of wall 
phone plates. The distance between 
1 and 2 may vary depending on...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp49
Charger
1Drive the screws (not included) into the 
wall using the wall template as a guide.
2Mount the charger (A), then slide it 
down (B) and to the right (C) until it is 
secure.
Headset (optional)
Connecting a headset to the handset 
allows hands-free phone conversations. 
Please use only a Panasonic headset 
(page 7).
LHeadset shown is KX-TCA86.
Switching a call between the headset 
and handset speakerphone
To...

Useful Information
50For assistance, please visit http://www.panasonic.com/phonehelp
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG5672/KX-TG5673
Display messageCause/solution
BusyLThe called base unit is in use.
LAnother handset or the called handset is in use.
*1
LThe handset you tried to copy phonebook items to is in 
use.*1
LThe handset you are calling is too far from the base unit.*1
Error!!LThe handset’s registration has failed. Move...