Panasonic Kx Tg2563 Operating Instructions Manual

Special Features
51
Advanced Operation
Automatic Security Code Setting
Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
(CALL!WAIT/FLASH) 
(TONE)(REDIAL/PAUSE) 
(FUNCTION/EXIT/CH) 
(TONE)
(FLASH/CALL!WAIT/VOICEÒMAIL)(REDIAL/PAUSE)
    ,      , FWD/EDIT 

52
For Call Waiting Service Users
Press (FLASH/CALL!WAIT/VOICE!MAIL)or (CALL!WAIT/FLASH)if you hear
a call-waiting tone while talking.
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press (FLASH/CALL!WAIT/VOICE!MAIL)or
(CALL!WAIT/FLASH)again.
•The call waiting service cannot be used when a parallel connected telephone is
in use.
•If this function does not operate properly, consult your telephone company for
details.
Call Waiting Caller ID Feature
Call...

53
Advanced Operation
FLASH Button
Pressing (FLASH/CALL!WAIT/VOICE!MAIL)or (CALL!WAIT/FLASH)allows
you to use special features of your host PBX such as transferring an
extension call or accessing special telephone services (optional) such as
call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”. 
Make sure...

54
Wall Mounting
To Power
Outlet
This unit can be mounted on a wall phone plate.
2
Connect the AC adaptor.
3
#Tuck the telephone line
cord inside the wall
mounting adaptor.
$Connect the telephone
line cord to the unit.
%Install the adaptor by
pushing it in the direction
of the arrow.
•The word “UP” should face
upward.
1
Adjust the angle of the cradle:
#Slide the lock switch
to “RELEASE”.
$Rotate the cradle 90°
until it faces straight
up.
%Slide the lock switch
to “LOCK” with the
cradle facing straight...

55
Useful Information
4
Connect the telephone line
cord. Mount the unit, then
slide down.
•Raise the antennas.
5
To charge the handset battery:
Place the handset in the cradle as
shown.
•The IN USE/CHARGE indicator lights.
IN USE/CHARGE
Indicator 

Using the Belt Clip
Using an Optional Headset
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only the Panasonic KX-TCA88 headset. To order
call the accessories telephone number on page 2.
Connecting the headset to the handset
Open the headset jack cover, and connect the headset to the headset
jack as shown below.
Headset Jack
H
When the optional headset is connected to the handset, make sure to use the
headset to talk with the caller. If you want to have...

57
Useful Information
Battery Replacement
Attention:
The product you have purchased is powered by a nickel
cadmium battery which is recyclable. At the end of its
useful life, under various state and local laws, it is illegal
to dispose of this battery into your municipal waste
stream. Please call 1-800-8-BATTERY for information on
how to recycle this battery. If “Recharge battery” is displayed and/or “” flashes after being
fully charged, replace the battery with a new Panasonic P-P510
(N4HKGMB00001)...

58
Adding Another Phone
This unit will not function during a power failure. To connect a standard
telephone on the same line, use the Panasonic T-adaptor KX-J66.
To order, call the accessories telephone number on page 2.
T-Adaptor (KX-J66) Single-Line 
Telephone Jack
Telephone 
Line Cord Standard Telephone 

Before Requesting Help
59
Useful Information
Problem
“No link to base.
Place on cradle and
try again.” is displayed
and an alarm tone sounds.
The unit does not work.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The handset and/or the base
unit do not ring.
The handset display is
blank.
The handset display is still
blank after pressing 
Ö, Ñ,
BACKÜor FWD/EDITá.
Remedy
•You are too far from the base unit. Move
closer and try again.
•Place the handset on the base unit and
try...

60
Before Requesting Help
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display the
caller’s name and/or phone
number.
The display goes to the
standby mode while viewing
the Caller List.
When a second call is
received during a
conversation, the unit does
not display the new caller’s...